F270 4Bolt With Filter, Pullstart & Carb

£189.00

Product may vary slightly from image representation.
  • Model:F270200000
Live Stock Check: 0 units
Share This Product

Chung Yank (CY) F270.

NOTE: We can remove, Clutch, Clutch Housing, Air Filter, exhaust, carb etc to reduce cost for thoes that want to use there exisiting setups.

Chung Yang F270 engine (34mm bore, 30mm stroke - 27.2cc) with Walbro WT-668 carb. Includes 54mm inner clutch assembly pre-installed. Ready to bolt-on. Approx 3.25+ horsepower. Similar design to the Zenoah G240RC/G270RC - 4 transfer port hp cylinder, single ring piston, double sided finned flywheel, and hp exhaust canister. Engine requires 91 octane or higher fuel, mixed 25:1 with 2-cycle oil.


Comes as pictured, with plastic/foam air filter, and HP exhaust canister.

For R/C: Fits a wide variety of R/C cars, planes, boats, and helicopters. Same mounting dimensions as Zenoah G230RC / G260RC. For cars - fits FG: Marder, Leopard, Monster Beetle, Monster Truck, Stadium Truck, Pajero, etc. Also fits Duratrax Firehammer, XTM, Carson Attack, HPI Baja 5b, Traxxas Monster Buggy, and most other large scale onroad and offroad RC cars.

 

Model F270
Cooling Type   Air Cooled
Displacement cc 26.9
Bore mm 35
Stroke mm 28
Max. Power PS / rpm 2.7 / 11000
Max. Torque kg-m / rpm 0.157 / 9250
Min. Fuel Consumption g/PS . H 470
Max. rpm at no load rpm 18000
Compression Ratio   9.5
Fuel Recommend   Octane 95~98
Oil Recommend   FC grade 2 Cycle engine oil
Mixture Ratio   Pre-mixed (25 Gasoline : 1 Engine Oil)
Ignition Type   TDI
Carburetor   WT
Spark Plug Std. NGK: CMR7H
Starter   Recoil
Clutch In rpm 5700
Stall rpm 7300
Overall Size Length mm 168
Width mm 150
Height mm 197
Weight kg. 2.56
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x IRC Red UHD Front big bore springs1 x Center Tower to Clutch suport brace V1.01 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x M4 Captive Nuts / T Nuts - Bag102 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Center Tower throttle supports1 x DBXL Top shock cap Bush 5mm2 x 3x6x0.3 Steel Shim - Pack 101 x Rear Big Bore Shocks - Losi 5ive Silver1 x Center Tower to Clutch suport brace V2.01 x 2x 5mm Thick Top Mount Brackets - Savage X1 x HPI MT2 Diff Cup Case Silver - 1x1 x Baja Shock Top Mounts - Rear1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x CY Clutch case Housing1 x Baja Shock Spring Retainer - Slotted1 x Torx Screw Kit Elcon etc - High tensile Steel1 x Shock Bleed Screw - 4x1 x F270 4Bolt With Filter, Pullstart & Carb1 x Center Tower top plate for truck V2.01 x Engine Clutch bottom spacer 6.5mm - 875711 x Shock Cap O-Ring Spacers1 x 4x8x0.3 Steel Shim - Pack 101 x Losi 5ive Spring Retainers1 x Outdrive cup shaft Orings1 x Shock Bush short1 x G270RC Petrol RC Engine - 2 Stroke1 x 4mm Nylon brake pipe1 x HPI Savage Screw kit (all models) - High tensile1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x 10x16x0.3 Steel Shim - Pack 101 x Red Big Bore shock Spring Retainers - Aluminium2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x 10x16x1.0 Steel Shim - Pack 102 x Center Tower bearing set1 x Baja Brake Kit - Full Set all Models1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x M4x10 Socket head cap screws - bag 101 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x 2x Top shock support brackets - Savage x
Reviews
TurtleRacing Rear shock mounts
TurtleRacing Rear shock mounts
£5.60

Bought the big bore shocks with this mount for my hpi baja 5...