Rear Big Bore Shocks - Losi 5ive Blue

127.62€

Product may vary slightly from image representation.
  • Model:5ive-Rearsh
Live Stock Check: 0 units
Share This Product

 

Innovative-RC Losi 5ive Front Big Bore Shocks - Blue

After Months of testing we are pleased to release the Innovative-RC Losi 5ive Big Bore shocks, Innovative-RC 'Big Bore' shocks are purposely built from the ground up using no stock parts what so ever. Giving a true after market shock with many features over stock shocks...with full spares of every part available.

Based around our proven big bore baja shocks we have kept the large oversized shock body of 20mm which gives plenty of volume for oil backed up by a 8mm high tensile steel shaft that is precision ground for roundness and most important of all that perfect oil seal surface in all running conditions. No large shock shaft would be complete without a full Umbrella/Oil seals to give the best possible oil seal, that is also backup up by other seals to keep all that fine track dirt and sand out of the shock making leaks a thing of the past. So no expensive seal upgrades are needed!!

Each shock Cap Contains a bleeder hole for easy quick assemble and bleeding of the shocks once filled with oil removing all air and excess oil quickly and efficiently. While the shock body has a fully adjustable unlimited potion adjust that screws up and down the length of the shock body giving that ideal shock spring set-up for any track or condition that might come into play.

Each shocks Spring retainer is full housed on the shock shaft & rose joint meaning the spring retainer can no longer come loose meaning no more lost or loose spring retainers. (a slotted version is sold as after market upgrade for those who like fast change spring setups)

Shock body’s also have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Shocks come complete with Progressive springs as standard giving you a soft top ride of the shock and a firmer lower spring travel when needed. Giving a nice fine balance over a mixed surface setup.

shock springs included on IRC Losi Shocks
Front –2.7Wire gauge , 20kg(~44lb) Spring Weight
Rear – 3.2mm Wire gauge, 30kg(~66lb)
*Spring weight is taken in fully compressed state

.:Over View:

  • Massive 8mm hardened steel shock shaft - ground round for a perfect seal

  • Shock body's have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish

  • Spanner Flats on all shock body for easy assembly and maintenance.

  • Spanner flats on shock shafts

  • Springs as standard

  • 2x Losi 5ive Big Bore shocks - pre assembled.

  • 2x Bottom rose joint balls for mounting.

  • 2x top shock mount pivots for Stock mounting

  • screws & hardware for mounting shocks.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

  • Same length as stock shocks, so direct fit.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Custom Shock Socks available from us & groovy_gaiters

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 35-40wt front, 45-50wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Baja Rear lower arm brace Red - 874801 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x 26cc (34mm) Cylinder Head - 4 Bolt2 x M3x12 Socket head cap screws - bag 102 x M3x35 Socket head cap screws - bag 102 x IRC Hing Pins Rear Top V2 - 866353 x CY Pull Start Assembly - Metal grab2 x 2x Losi LST1 & LST2 Diff Cup- silver1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T2 x Roll Bar for HPI Savage 3mm2 x Baja Front Upper Brace Blue - 874812 x HPI Baja wheel drive pin 5x24- 965044 x M2.5 Nylock Nuts - Bag 102 x M5 Hank rivet bush - Bag101 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x Losi 5ive Engine mount inserts - #191 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x IRC Big Bore upgrade set V1 to V2 HPI Savage4 x Baja Rear Lower Brace 2 Blue - 874791 x M5 washers - Zinc plated bag 202 x M3x5 Button Head Socket cap screws - bag 103 x Big Bore Shock 2 Hole Piston DUAL Rate2 x M4 Washer Zinc plated bag 201 x M3x3 Grub Set screw1 x M3 Nylock nut bag of 201 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x 2x 20x32x7mm Ball Bearing Metal Shield- B0942 x Losi 5ive Engine mount inserts - #201 x M4 Spring Washer Zinc plated - bag 201 x Carburetor Gasket1 x center tower brake cam set1 x Innovative-RC Hoodie - Size X Large3 x Losi 5ive Engine mount inserts - #181 x Center Tower to Clutch suport brace V2.01 x IRC Red UHD rear big bore springs - Losi 5T2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x M3x16 Countersunk Socket head cap screws - bag 101 x 2x Flanged 10x6x3mm4 x HPI Baja wheel drive pin 4x282 x ProLux Stone Fuel Filter - RED2 x M4x4 Grub Screws2 x M3 washers - Zinc plated bag 202 x HPI Baja wheel drive pin - 965042 x Innovative-RC Muggy Chassis - Black1 x HPI MT2 Diff Cup Case Black - 1x2 x Big Bore shock Spring Retainers - Aluminium1 x 6x Differential Gaskets - TT1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x Failsafe-switch and small slide switch2 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x Carb & Exhaust screws - 154822 x HPI Baja Brake Calliper2 x M4 Nylock nut bag of 202 x Big Bore shock Spanner2 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3212 x Big Bore Shock 3 Hole Piston DUAL Rate2 x Black Shock Spring Adjuster Ring3 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0942 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK2 x Baja Brake Kit - Full Set all Models1 x Big Bore Shock Body All Colours - Losi Front1 x Losi 5T 5B Shock Towers - Front1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x M4x10 Countersunk Socket head cap screws - bag 101 x Front - Antiroll Bar brace1 x M6 washers - Zinc plated bag 201 x Brake plate spacer Blue - 874971 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x Baja Shock Spring Retainer - LST1 x HPI Baja Brake Calliper - Blue Anodized1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x HPI Baja Front Upper Plate 4mm - 874841 x IRC Hing Pin screw & washer set1 x M4x12 Countersunk Socket head cap screws - bag 101 x HPI Baja Rear Lower Brace Blue - 874801 x Titanium Exhaust Wrap1 x Baja Upper Front Arm Brace Upper Blue1 x Clear Anodized Shock Cap - Silver1 x HPI Baja stearing servo adapter mount - Blue1 x Ceter tower diff mounts Front & Rear1 x Innovative-RC Foam Filter Oil - 100ml1 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x Shock Tower Brace - RED1 x High response clutch set - Red Spring
Reviews
Shock Tower Brace - Black
Shock Tower Brace - Black
5.23€

Nice bit of kit, work well with stock shocks and towers too,...