Rear Big Bore Shocks - Losi 5ive Silver

$136.97

Product may vary slightly from image representation.
  • Model:5ive-Rearsh
Live Stock Check: 4 units
Share This Product

 

Innovative-RC Losi 5ive Front Big Bore Shocks - Silver

After Months of testing we are pleased to release the Innovative-RC Losi 5ive Big Bore shocks, Innovative-RC 'Big Bore' shocks are purposely built from the ground up using no stock parts what so ever. Giving a true after market shock with many features over stock shocks...with full spares of every part available.

Based around our proven big bore baja shocks we have kept the large oversized shock body of 20mm which gives plenty of volume for oil backed up by a 8mm high tensile steel shaft that is precision ground for roundness and most important of all that perfect oil seal surface in all running conditions. No large shock shaft would be complete without a full Umbrella/Oil seals to give the best possible oil seal, that is also backup up by other seals to keep all that fine track dirt and sand out of the shock making leaks a thing of the past. So no expensive seal upgrades are needed!!

Each shock Cap Contains a bleeder hole for easy quick assemble and bleeding of the shocks once filled with oil removing all air and excess oil quickly and efficiently. While the shock body has a fully adjustable unlimited potion adjust that screws up and down the length of the shock body giving that ideal shock spring set-up for any track or condition that might come into play.

Each shocks Spring retainer is full housed on the shock shaft & rose joint meaning the spring retainer can no longer come loose meaning no more lost or loose spring retainers. (a slotted version is sold as after market upgrade for those who like fast change spring setups)

Shock body’s also have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Shocks come complete with Progressive springs as standard giving you a soft top ride of the shock and a firmer lower spring travel when needed. Giving a nice fine balance over a mixed surface setup.

shock springs included on IRC Losi Shocks
Front –2.7Wire gauge , 20kg(~44lb) Spring Weight
Rear – 3.2mm Wire gauge, 30kg(~66lb)
*Spring weight is taken in fully compressed state

.:Over View:

  • Massive 8mm hardened steel shock shaft - ground round for a perfect seal

  • Shock body's have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish

  • Spanner Flats on all shock body for easy assembly and maintenance.

  • Spanner flats on shock shafts

  • Springs as standard

  • 2x Losi 5ive Big Bore shocks - pre assembled.

  • 2x Bottom rose joint balls for mounting.

  • 2x top shock mount pivots for Stock mounting

  • screws & hardware for mounting shocks.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

  • Same length as stock shocks, so direct fit.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Custom Shock Socks available from us & groovy_gaiters

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 35-40wt front, 45-50wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 26cc piston (34mm) 4Bolt1 x IRC Front MID Front big bore springs - Losi 5T1 x M5 Hank rivet bush - Bag101 x F270 4Bolt With Filter, Pullstart & Carb1 x IRC Red UHD Front big bore springs1 x 90Deg PushFit 4mm tube M51 x 2x Losi LST1 & LST2 Diff Cup- silver1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x Losi 5ive Engine mount inserts - #181 x Shock Cap O-Ring Spacers2 x center tower brake cam set1 x Out Drive Cup Pins - Bag 61 x M3 Nylock nut bag of 201 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x CVD Drive set Pins 4x20mm B65601 x Center Tower throttle supports1 x Engine Clutch bottom spacer 6.5mm - 875711 x CY 29cc Piston ring - 36x1mm1 x Losi 5ive Spring Retainers1 x HPI Baja Brake Calliper - Blue Anodized1 x HPI Baja Right Side Engine Mount Brace - 874901 x Full X upgrade Kit1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x M3 washers - Zinc plated bag 201 x IRC Red UHD rear big bore springs1 x F230 4Bolt With Filter, Pullstart & Carb1 x Baja Shock Top Mounts - Rear1 x M4x4 Grub Screws1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Big Bore Shock 5 Hole Piston1 x UHD Outdrive Rear HPI Baja 5SC size (2x) - 1049671 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x CY +2mm Stuffer Stroked Crank set1 x M2 Captive Nuts / T Nuts - Bag 102 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Clear Anodized Shock Cap1 x Innovative-RC Foam Filter Oil - 100ml1 x Black Shock Spring Adjuster Ring1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x SuperSwitchHD 2 Pac1 x M8 Rod Ends for Big Bore Shocks1 x CY Kill Switch Inc rubber cover1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x Outdrive cup shaft Orings1 x Big Bore shock Spanner1 x Cleon MMX stiffening chassis side panels - Black1 x Left Spacer Black - 875711 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x M6 Rod Ends - Right hand thread1 x HPI Baja stearing servo adapter mount1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x Big Bore Shock 3 Hole Piston1 x M3x35 Socket head cap screws - bag 101 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x ProLux Stone Fuel Filter - Grey1 x Shock Tower Brace - Silver1 x Baja Bush Set - BLUE1 x IRC BLACK MID rear big bore springs - Losi 5T2 x M3x10 Socket head cap screws - bag 101 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x 4-40x3/8 Button Head socket Screw - Bag 101 x Steering Crank shaft1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x IRC Red UHD Front big bore springs - Losi 5T1 x 5x10x0.3 Steel Shim - Pack 101 x M5 washers - Zinc plated bag 201 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Battery box bracket HPI Firestorm - Savage X1 x Carburetor Set WT6681 x Silkolene - Foam Filter Oil 1L1 x Black Anodized Shock Cap1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x HPI Baja wheel drive pin 5x24- 965041 x Front Big Bore Shocks - Losi 5ive Blue1 x 4 Bolt Cylinder Gasket1 x Baja Shock Spring Retainer - LST1 x M4x10 Button Head Socket cap screws - bag 101 x 2x Aluminium Buggy Shock tower - NON X Savage1 x 10x16x0.5 Steel Shim - Pack 101 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x Clear Anodized Shock Cap - Silver
Reviews
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
$27.46

<p>As always excellent quality of service!!! And great parts...