Diff/Bulkhead Housing - Rear Silver B2542

£170.00

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Baja Shock Spring Retainer - LST1 x CY 4 Bolt Gasket set rebuild kit1 x CVD inner Drive set Pins 5x20mm1 x CY Clutch case Housing1 x Baja Brake Kit - Full Set all Models1 x Brake pad screws - M4 Tower to IRC pads1 x Baja Bush Set - BLUE1 x 1x Savage Diff Cup Case1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Carburetor Gasket1 x CY Exhaust Gasket1 x 5x 2.5x14mm CVD Dowel Pins1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x M6 washers - Zinc plated bag 201 x MT4 Chassi Gaskets - 6x1 x Engine Clutch bottom spacer stock - 875711 x 29cc Piston (36mm)1 x Spur Gear Spacer - 866161 x IRC Hing Pins Front Top V2 - 866331 x IRC ESC Box - MT41 x Losi 5ive-T 2.0 servo single arm V2.01 x HPI Baja Rear Lower Brace Blue - 874801 x Losi 5T 5B Shock Towers V2 - Rear1 x Baja Front Upper Brace Blue - 874811 x IRC Red UHD Front big bore springs1 x Losi 5ive Engine mount inserts - #181 x Thunder Tiger Front/Rear outdrive1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x Thunder Tiger Differential Case MT4 G3 - Red1 x Losi 5ive Hing Pins A-Arms1 x IRC Hing Pins Rear Hub V2 - 866361 x Shock Bleed Screw - 4x1 x Rear Big Bore Shocks - Losi 5ive Blue1 x 4mm Nylon brake pipe1 x Shock Cap O-Ring Spacers1 x HPI Baja Rear Brace 4mm - 874881 x M3x8 Countersunk cap screws - bag 101 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Losi 5ive Engine mount inserts - #201 x Innovative-RC T-Shirt - Size Large1 x 4x Complete Innovative Black Anodized Savage Shocks1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x Piston Roller Pin Bearing1 x 10x 3.5mm Body Clip - Rpin1 x Servo Y Lead JR, Futaba, Hitec etc1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x CY Replacement Crank Case Gasket1 x Carburetor Set WT6681 x I-RC Baja Big Bore rear shock Spring - Stock1 x Baja Rear Lower Brace 2 Blue - 874791 x IRC RX Box Set - MT41 x 4mm flexable brake pipe1 x Losi 5ive top shock mounts1 x 4x8x0.3 Steel Shim - Pack 101 x Engine / Cylinder Cover1 x Baja Front Lower Brace Blue - 874781 x Mugen Fuel Tank Mounts1 x 27cc (35mm) Cylinder Head 2 Bolt1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x differential cross pins TT MT4 - 2x1 x Front Heavy Duty losi Shock Shaft - 8mm1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x M4x16 Countersunk Socket head cap screws - bag 101 x Crankcase engine Seal set - Nitrile type1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x M4x30 Socket head cap screws - bag 101 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x HPI Baja wheel drive pin 4x281 x CRT Chassis Gaskets1 x 1x Losi Muggy Diff Cup - Black1 x Innovative-RC TT MT4 trayless Kit - RED1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x Baja Bush Set - Black1 x 4 Bolt Cylinder Gasket1 x Shock Bush short1 x M6 Rod Ends & camber + steering ball set1 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x Carb & Exhaust screws - 154821 x I-RC Losi Big Bore rear shock Spring - 66lb1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x 50x 6mm Body Clip Bulk - Rpin1 x Left Spacer - 875711 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x M5x5 Grub Set Screw1 x Steering Crank shaft1 x Titanium Exhaust Wrap1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x M3x3 Grub Set screw1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Rear Big Bore Shocks - Losi 5ive Black1 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x Innovative-RC Muggy Chassis - Silver1 x Innovative-RC Foam Filter Oil - 100ml1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x M4 Captive Nuts / T Nuts - Bag101 x CVD inner Drive set Pins 5x22mm1 x Ceter tower diff mounts Front & Rear1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Diff/Bulkhead Housing - Front Silver1 x Innovative-RC Muggy radio tray set - Black1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x LipoBox - 4S1 x SuperSwitchHD - 1x1 x O-Ring Diff Cups - 5.5x2mm1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x 6x Differential Gaskets1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x LipoBox - 6S1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x Innovative-RC Hoodie - Size Small1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Pull Start Thumb Screws1 x Savage Shock Bottom End Cap1 x Front Big Bore Shocks - Losi 5ive Blue1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x 4x Complete Innovative Red Anodized Savage Shocks1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x IRC Hing Pins Rear Bottom V2 - 866351 x Baja Diff Cup side screws1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x Shock Bottom End Cap1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x 1x Losi Muggy Diff Cup - Silver1 x Baja Bush Set1 x 1x Losi 8ight-T Diff Cup - Black1 x M3x12 Countersunk Socket head cap screws - bag 101 x Savage Big Bore shock Socks - Black1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x M3x10 Countersunk Socket head cap screws - bag 101 x Clear Anodized Shock Cap1 x M2 Captive Nuts / T Nuts - Bag 101 x Engine Clutch bottom spacer 6.5mm - 875711 x Innovative-RC Muggy Chassis - Black1 x M6 Rod Ends - Right hand thread1 x HPI BAja Left Side Engine Mount Brace - 874891 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x Savage Rod End 10mm Balls1 x HPI Baja stearing servo adapter mount - Black1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x M6 Captive Nuts / T Nuts - Bag101 x IRC Hing Pins Full Set V2 - 10Pins1 x MCD & Savage Shock Spring - 2.5mm1 x M5 Hank rivet bush - Bag101 x IRC Hing Pin screw & washer set1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x IRC Red UHD rear big bore springs - Losi 5T1 x I-RC Baja Big Bore front shock Spring - Stock1 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x M3x12 Socket head cap screws - bag 101 x 29cc Piston Rebuild Kit Set (36mm)1 x Silkolene - Foam Filter Oil 1L1 x Rear Shock end Ball - 11mm1 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x Losi 5ive Spring Retainers1 x 4x Complete Innovative Silver Anodized Savage Shocks1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x 6x Differential Gaskets - TT1 x insulator gasket
Reviews
TurtleRacing Rear shock mounts
TurtleRacing Rear shock mounts
£5.60

Bought the big bore shocks with this mount for my hpi baja 5...