Flux Black Anodized Standard LCG TVP Kit

$56.16

Product may vary slightly from image representation.
  • Model:Flux-STDkit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - based on standard HPI Flux Length TVPs but 4mm Thick.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: Standard Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
Based on standard flux tvp length so no body shell changes needed a direct 100% replacement
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):260grams
Skid Plate & Braces: 90 grams

.:Included:.
2x TVPs (Left & Right)
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Diff/Bulkhead Housing - Rear Silver B25421 x CVD Pin rebuild kit - B32171 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x IRC Red UHD rear big bore springs - Losi 5T1 x M6 washers - Zinc plated bag 201 x Losi 5ive Spring Adjuster Ring1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x IRC Hing Pins Rear Bottom V2 - 866352 x 4x Complete Innovative Black Anodized Savage Shocks1 x innovative-rc Losi 5ive Diff Cup / Case1 x HPI Baja wheel drive pin - 965041 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch2 x Losi 5ive Spring Retainers2 x MCD V4 RaceRunne Big Bore Shocks Silver V2 - Set 4x1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x M3x10 Socket head cap screws - bag 101 x M6 Captive Nuts / T Nuts - Bag101 x Losi 5ive top shock mounts1 x 1x Losi Muggy Diff Cup - Silver1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x 4x Complete Innovative Red Anodized Savage Shocks1 x M4x12 Socket head cap screws - bag 101 x M4x10 Socket head cap screws - bag 101 x High response clutch set - Red Spring1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Baja Upper Front Arm Brace Upper Blue2 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Innovative-RC Big Bore Shock Socks - Green1 x Carb & Exhaust screws - 154821 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x M3x8 Socket head cap screws - bag 101 x 50x 6mm Body Clip Bulk - Rpin1 x 10x16x0.3 Steel Shim - Pack 101 x Big Bore Shock 5 Hole Piston DUAL Rate1 x 4mm Nylon brake pipe2 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x Savage Shock Bottom End Cap1 x Shock Cap O-Ring Spacers1 x M2.5x12 Stainles Socket Cap Screw - Bag 101 x Rear Fuel tank plate support bracket1 x Ceter tower diff mounts Front & Rear1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x Flux Standard LCG TVP Kit1 x Losi 5ive Hing Pins A-Arms1 x Big Bore Shock Body All Colours - Losi Front1 x NGK Spark Plug CMR7H1 x Engine / Cylinder Cover 4 Bolt1 x Engine Clutch bottom spacer Blue - 875711 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0922 x 6x Screw Shaft M5x3x18mm1 x Dgobone Drive Pin Set 5x24mm1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x Flywheel Nut1 x M2.5 Nylock Nuts - Bag 102 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Carburetor Gasket1 x Losi 5ive Engine mount inserts - #201 x High response clutch set - Yellow Spring1 x CY 29cc Piston ring - 36x1mm1 x X Upgrade Kit1 x M4x4 Grub/Set Screw1 x Crankcase engine Seal set - Nitrile type1 x 1x Savage Diff Cup Case1 x Out Drive Cup Pins - Bag 61 x M8 Rod Ends for Big Bore Shocks1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x O-Ring Diff Cups - 5.5x2mm1 x DBXL Top shock cap Bush 5mm1 x losi 5ive diff inserts1 x Big Bore shock Spanner1 x Baja Diff gear Drive pin - 965011 x Engine Clutch bottom spacer RED - 875711 x Baja Front Lower Brace Blue - 874781 x Baja Shock spring retainer - Heavy Duty Springs1 x Maxima Air Filter Cleaner - Spray1 x Black Big Bore shock Spring Retainers - Aluminium
Reviews
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
$68.64

really nice well made chassis plate , looks nice with all my...