Flux Black Anodized +6mm Front LCG TVP Kit

63.96€

Product may vary slightly from image representation.
  • Model:Flux-6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 6mm Extended Front over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right): 260grams
Skid Plate & Braces:95grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x Extended 6mm Front LCG TVPs Package & dog bone - 4mm2 x LCG (Low Center of Gravity) TVPs - 4mm Thick3 x 4-40x1/2 Socket Head Cap Screw - Bag 105 x Shock Cap O-Ring Spacers2 x Flux Black Anodized +6mm Front LCG TVP Kit2 x LCG TVPs, Exstended 1inch back with 6mm Front2 x Extended 6mm Race TVP Kit2 x Flux Black Anodized Standard LCG TVP Kit2 x 4mm Standard LCG TVPs Package - 4mm2 x HPI Baja wheel drive pin - 965042 x Baja Big Bore Shock O-Ring Kit2 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x Crankcase engine Seal set - Viton type2 x Shock Bottom End Cap2 x 6x Differential Gaskets1 x Losi 5ive Engine mount inserts - #191 x Dgobone Drive Pin Set 5x24mm1 x Losi 5ive Hing Pins A-Arms1 x M5 Hank rivet bush - Bag104 x O-Ring Diff Cups - 5.5x2mm2 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x IRC Red UHD Front big bore springs - Losi 5T1 x Standard Race LCG TVP Kit1 x 2x Losi LST1 & LST2 Diff Cup- silver2 x Titanium Exhaust Wrap1 x Baja Rear Lower Brace 2 - 874791 x M4x30 Socket head cap screws - bag 101 x Extended 1inch Rear & 6mm Front Race TVP Kit1 x Flux Standard LCG TVP Kit1 x Skid plate for Standard LCG TVPs1 x Baja Front Upper Brace - 874812 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)2 x Carburetor Gasket1 x M4x12 Socket head cap screws - bag 102 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Skid Plate for Exstended 6mm TVPs1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x IRC Red UHD rear big bore springs2 x 8x Shock Standoffs - Buggy Shocks2 x HPI Baja Right Side Engine Mount Brace - 874901 x Holts Brake Cleaner1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x HPI Baja Front Upper Plate 4mm - 874842 x 2x Aluminium Buggy Shock tower - NON X Savage3 x 4-40x3/8 Button Head socket Screw - Bag 101 x 4x Hong nor CRT Shock standoffs2 x 2x Aluminium Buggy Shock tower - NON X Savage Black1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x HPI MT2 Diff Cup Case Silver - 1x1 x Brake pad screws - M4 Tower to IRC pads1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x HPI Baja Rear Brace 4mm - 874881 x Left Spacer Black - 875711 x HPI Baja stearing servo adapter mount2 x 8x Shock Standoffs - Standard Shocks1 x IRC Hing Pin screw & washer set1 x Air Filter Gasket1 x Spur Gear Spacer - 866161 x Clutch Shoe Holder Mount1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x M3x10 Socket head cap screws - bag 101 x CY 4 Bolt Gasket set rebuild kit2 x 8x CEN Genesis Shock standoffs1 x M3x16 Socket head cap screws - bag 101 x Brake pad screws - Stock Tower to IRC pads1 x Flywheel Key1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Losi 5ive Diff Gaskets - 6x1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x Thunder Tiger centre diff out drive1 x 1x Losi LST1 & LST2 Diff Cup - Black1 x HPI Baja Front Upper Plate 4mm RED - 874841 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Innovative-RC Hoodie - Size XXX Large1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x M6 Rod Ends & Steering ball set1 x Innovative-RC Hoodie - Size XX Large1 x 26cc Piston Rebuild Kit Set (34mm)1 x Innovative-RC T-Shirt - Size Large1 x Innovative-RC Hoodie - Size X Large1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x Innovative-RC T-Shirt - Size XXLarge1 x 6x Differential Gaskets - TT1 x Innovative-RC Hoodie - Size XXXX Large1 x 4mm flexable brake pipe1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Innovative-RC T-Shirt - Size XLarge1 x T PushFit Connector 4mm1 x Flywheel Nut1 x Innovative-RC Hoodie - Size Large1 x Innovative-RC Mug1 x Innovative-RC Foam Filter Oil - 100ml1 x High response clutch set - Yellow Spring1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt
Reviews
Extended 6mm Front LCG TVPs Package & dog bone - 4mm
Extended 6mm Front LCG TVPs Package & dog bone - 4mm
69.77€

Have just received and fitted this kit and have to say it lo...