Flux Standard LCG TVP Kit

$60.18

Product may vary slightly from image representation.
  • Model:Flux-STDkit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - based on standard HPI Flux Length TVPs but 4mm Thick.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: Standard Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
Based on standard flux tvp length so no body shell changes needed a direct 100% replacement
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):260grams
Skid Plate & Braces: 90 grams

.:Included:.
2x TVPs (Left & Right)
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

had these a while now and have done some proper hard bashing and everything on my savage has broke twisted or bent but these are like new very strong easy to fit. i liked them so much i went for the xl upgrade and added 23mm wheels and just as solid very good upgrade dont read about them buy em and see for yourself

Rated by darren mccarthy
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CY Flywheel / Fan Cover1 x M5 washers - Zinc plated bag 201 x Baja Front lower arm brace Red - 874811 x Spur Gear Spacer - 866161 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Thunder Tiger Front/Rear outdrive1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x Diff/Bulkhead Housing Screw Set1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Blue Big Bore shock Spring Retainers - Aluminium1 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x Baja Bush Set - Black1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x Left Spacer - 875711 x Engine / Cylinder Cover 4 Bolt1 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x Baja Diff gear Drive pin - 965011 x Hellfire Fuel Tank Mounts1 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x 50x 6mm Body Clip Bulk - Rpin1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Brake plate spacer RED - 874971 x IRC Hing Pins Rear Top V2 - 866351 x Innovative-RC Muggy Chassis - Silver1 x Ofna 250cc Fuel Tank Mounts1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x LipoBox - 4S1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x Dgobone Drive Pin Set 5x24mm1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x Smart-Fly - Pin & Flag1 x 3x Losi Muggy Diff Cup - Black1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x Center Tower top plate for truck V2.01 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x M3x16 Countersunk Socket head cap screws - bag 101 x Innovative-RC Muggy radio tray set - Black1 x M3x35 Socket head cap screws - bag 101 x 6x Differential Gaskets1 x Shock Tower Brace - Black1 x Baja Front Upper Brace - 874811 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x Baja Diff Cup side screws1 x Crankcase engine Seal set - Viton type1 x Baja Diff bush - B0801 x Right Clutch Spacer - 875551 x Shock Tower Brace - Silver1 x Diff/Bulkhead Housing - Front Silver1 x Piston Pin 23 & 26cc - 8x25mm1 x Baja Diff Oring Seal1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x CY Insulator manifold1 x O-Ring Diff Cups - 5.5x2mm1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x Savage Shock Bottom End Cap1 x Baja Diff o-rings - bag101 x M4 Nylock nut bag of 201 x CY Pull Start Assembly1 x 8x Shock Standoffs - Standard Shocks1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Front Big Bore Shocks - Losi 5ive Blue1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x 10x16x0.1 Steel Shim - Pack 101 x Losi DBXL front & rear shock end ball1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Baja Shock Spring Retainer - LST
Reviews
HPI Baja Front Upper Plate 4mm - 87484
HPI Baja Front Upper Plate 4mm - 87484
$29.42

an awesome upgrade to any baja, a lot more strength than a s...