Innovative-RC HPI Baja enclosed chassis - SHORT SILVER

139.45€

Product may vary slightly from image representation.
  • Model:87477-short
Available Options
Live Stock Check: 0 units
Share This Product

This Innovative-RC Baja SHORT Chassis

This Innovative-RC Baja Chassis has been custom made to build a short wheel base Baja, fits the HPI Baja 5B ,5SC & 5T. Made from high quality aluminium and available in 4 different colours (Silver/Clear anodized, Black, RED & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike giving a fully enclosed chassis.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled with inserts inserted for a front kick strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version) and Uber RC bumpers.

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.

this chassis is 1.75" (44.45mm) shorter than a stock chassis and made to take a full stock fuel tank witha coustom RX box. (note rx box not included). all other braces mount as normal.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets outside to keep weight down & maintaining strength
  • 680Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate included
  • 1.75" (44.45mm) shortened chassis
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Preinserted rivert for under skid & top brace.

 

Option Extra

Innovative-RC HPI Baja under chassis brace

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt1 x PROLUX FILTERED FUEL PICK UP CLUNK1 x 27cc (35mm) Cylinder Head 4 Bolt2 x ProLux Light Weight rebuildable fuel filter - large1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x Big Bore Shock 2 Hole Piston DUAL Rate2 x 26cc Piston Rebuild Kit Set (34mm)1 x Full X upgrade Kit2 x Shock Cap O-Ring Spacers1 x 23cc piston (32mm)1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x ProLux Stone Fuel Filter - Grey1 x MCD & Savage Shock Spring - 2.5mm3 x 1x Savage Diff Cup Case1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x 23cc Piston Rebuild Kit Set (32mm)2 x Baja Upper Front Arm Brace Upper Blue1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 27cc piston (35mm)1 x 26cc piston (34mm) - For 0.7mm Ring1 x 2x Savage Diff Cup Case1 x 2 Bolt heavy duty Cylinder Gasket1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals2 x M4x4 Grub Screws1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x 27cc (35mm) Cylinder Head 2 Bolt1 x ProLux Stone Fuel Filter - RED2 x Big Bore Shock 3 Hole Piston DUAL Rate1 x 26cc (34mm) Cylinder Head - 2 Bolt2 x Baja Rear Lower Brace 2 Blue - 874793 x 6x Differential Gaskets1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x CY 4 Bolt Gasket set rebuild kit1 x Rear Fuel tank plate support bracket1 x 26cc piston (34mm) 4Bolt1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x M4x12 Countersunk Socket head cap screws - bag 102 x T PushFit Connector 4mm1 x Baja Bush Set - BLUE2 x 4-40x3/8 Socket Head Cap Screw - Bag 102 x 1x Losi Muggy Diff Cup - Silver1 x X Upgrade Kit1 x Flywheel Nut3 x 4mm Nylon brake pipe2 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x M4x30 Countersunk Socket head cap screws - bag 101 x 4x8x0.3 Steel Shim - Pack 101 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black2 x M4 Washer Zinc plated bag 201 x Shock Tower Brace - Blue3 x M3 washers - Zinc plated bag 201 x Baja Big Bore Shock O-Ring Kit1 x 1x Losi 8ight-T Diff Cup - Silver1 x HPI MT2 Diff Cup Case Silver - 1x1 x 10x16x0.1 Steel Shim - Pack 101 x Shock O-Ring Kit1 x M3x35 Socket head cap screws - bag 102 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x M4x10 Countersunk Socket head cap screws - bag 101 x M2.5 Nylock Nuts - Bag 101 x M3x5 Button Head Socket cap screws - bag 101 x Crankcase engine Seal set - Nitrile type1 x 2x 9x24x7mm Ball Bearing Rubber Shield2 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI MT2 Diff Cup Case Silver - 2x1 x 90Deg PushFit 4mm tube M51 x M4x16 Countersunk Socket head cap screws - bag 101 x M4x10 Socket head cap screws - bag 101 x 5x10x0.3 Steel Shim - Pack 101 x 6x12x0.3 Steel Shim - Pack 101 x 4-40x3/8 Button Head socket Screw - Bag 103 x M4 Spring Washer Zinc plated - bag 202 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts3 x Crankcase engine Seal set - Viton type1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black2 x Baja Front Upper Brace Blue - 874811 x M3x20 Countersunk Socket head cap screws - bag 101 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts3 x O-Ring Diff Cups - 5.5x2mm1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x M3 Nylock nut bag of 201 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws2 x M5 washers - Zinc plated bag 201 x 2x Flanged Bearing - 10x6x4 3speed2 x M4x30 Socket head cap screws - bag 101 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 5x Fuel Pipe Clips - metal2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x HPI Baja Screw Kit (all models) - High tensile1 x Engine Piston Stopper1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x IRC Hing Pins Front Bottom V2 - 866341 x M3x8 Socket head cap screws - bag 101 x M6 washers - Zinc plated bag 201 x M4 Captive Nuts / T Nuts - Bag102 x 2x Nitro Silicone Switch Cover - Futaba etc1 x Losi 5ive Engine mount inserts - #192 x 4mm flexable brake pipe1 x M3 Spring Washer Zinc plated - bag 201 x Torx Screw Kit Elcon etc - High tensile Steel1 x M4 Nylock nut bag of 201 x M4x10 Button Head Socket cap screws - bag 101 x Losi 5ive Hing Pins A-Arms1 x 4x Complete Innovative Black Anodized Savage Shocks1 x M3x20 Socket Cap Screws - Bag of 101 x TurtleRacing Rear shock mounts1 x HPI Baja stearing servo adapter mount - Blue2 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x M4x16 Socket head cap screws - bag 101 x insulator gasket1 x 1x Losi 8ight-T Diff Cup - Black1 x CRT Tower Set - Nickel1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x Cleon MMX stiffening chassis side panels - Red1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x 3x6x0.3 Steel Shim - Pack 102 x 10x 6mm Body Clip - Rpin1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Bearing Puller1 x 10x16x0.3 Steel Shim - Pack 101 x HPI MT2 Diff Cup Case Black - 1x1 x CVD Drive set Pins 4x20mm B65601 x 1x Losi LST1 & LST2 Diff Cup - Black2 x Dgobone Drive Pin Set 5x24mm1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Shock Tower Brace - Silver1 x M3x8 Countersunk cap screws - bag 101 x M4x12 Socket head cap screws - bag 102 x 10x 3.5mm Body Clip - Rpin1 x Maxima Air Filter Cleaner - Spray1 x Cleon MMX stiffening chassis side panels - Black1 x Baja Diff o-rings - bag101 x 2x 17x30x7mm Ball Bearing Rubber Shield- B0921 x G290RC Petrol RC Engine - 2 Stroke1 x I-RC Losi Big Bore rear shock Spring - 44lb1 x IRC Red UHD Front big bore springs1 x Center Tower to Clutch suport brace V1.01 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x Innovative-RC Muggy Chassis - Black1 x Failsafe-switch and small slide switch1 x Baja Rear Lower Brace 2 - 874791 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Baja Rear lower arm brace Red - 874791 x Battery box bracket HPI Firestorm - Savage X1 x 4x Complete Innovative Silver Anodized Savage Shocks1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Losi 5ive Spring Retainers1 x Piston Pin Washer Set1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Futaba type sliding charing switch1 x Carburetor Set WT6681 x Baja Front Upper Brace - 874811 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x Innovative-RC Muggy radio tray set1 x Shock Bleed Screw - 4x2 x 50x 3.5mm Body Clip Bulk - Rpin1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Front Axel - Thunder Tiger MT4 CVD Universal1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x HPI Baja Rear Brace 4mm - 874881 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x M5 Hank rivet bush - Bag101 x Losi 5ive-T 2.0 servo single arm V2.01 x Engine / Cylinder Cover1 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x 2x 17x30x7mm Ball Bearing Metal Shield- B0921 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Baja front lower arm brace Red - 874781 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Baja Front Lower Brace - 874781 x Big Bore Shock Body All Colours - Losi Front1 x NGK Spark Plug CMR7H1 x IRC Black HD Rear Big Bore Springs1 x 2x Top shock support brackets - Savage x1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x G270RC Petrol RC Engine - 2 Stroke1 x CY 27cc Piston ring - 35x1mm1 x CY 2 Bolt Gasket set rebuild kit1 x IRC Front MID Front big bore springs - Losi 5T1 x Motorex Air Filter Oil - spray1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x 2x Flanged 10x6x3mm1 x Big Bore shock Spanner1 x Clear Anodized Shock Cap1 x HPI Baja Brake Calliper1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x 2x 5mm Thick Top Mount Brackets - Savage X1 x SuperSwitchHD 2 Pac1 x Engine Clutch bottom spacer stock - 875711 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Thunder Tiger Differential Case MT4 G3 - Red1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x M6 Captive Nuts / T Nuts - Bag101 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 87479
Reviews
Black Anodized Roll Bar
Black Anodized Roll Bar
15.10€

Super strong, yet suprisingly light at the same time... Fitt...