4x Complete Innovative Silver Anodized Savage Shocks

$149.76

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 0 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
     
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Losi 5ive-T 2.0 servo saver Doube arm V2.02 x FILTERED FUEL PICK UP CLUNK4 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x Shock Cap O-Ring Spacers1 x Left Spacer - 875711 x I-RC Losi Big Bore rear shock Spring - 44lb3 x Big Bore shock Spanner1 x Losi 5T 5B Shock Towers V2 - Rear3 x Flywheel Key1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x M3x12 Socket head cap screws - bag 101 x Losi DBXL front & rear shock end ball2 x 10x 3.5mm Body Clip - Rpin2 x CY stock crank set2 x 2x 12x24x6mm Ceramic Ball Bearing Rubber Shield- B0893 x Baja Big Bore Shock O-Ring Kit2 x I-RC Front Baja Big Bore shock Spring - MID Progressive2 x 2x Losi LST1 & LST2 Diff Cup- silver2 x Innovative-RC Hoodie - Size XXXX Large1 x Clutch Spring - Yellow2 x Rear Heavy Duty Baja Shock Shaft - 8mm2 x V3 Front Big Bore Shocks - Baja 5B 5T1 x innovative-rc Losi 5ive Diff Cup / Case1 x Big Bore Shock 3 Hole Piston1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x Engine Clutch bottom spacer stock - 875711 x MCD tower mounts for MCD BB shocks1 x Innovative-RC Foam Filter Oil - 100ml1 x Failsafe-switch and small slide switch1 x Out Drive Cup Pins - Bag 61 x HPI Baja Front Upper Plate 4mm Blue - 874841 x IRC Hing Pins Rear Hub V2 - 866361 x Nitro Engine Piston Stopper1 x 10x16x1.0 Steel Shim - Pack 101 x Baja Shock Spring Retainer - Slotted1 x Black Big Bore shock Spring Retainers - Aluminium1 x M4x4 Grub/Set Screw2 x 10x16x0.5 Steel Shim - Pack 101 x Baja Diff Oring Seal1 x Thunder Tiger Differential Case MT4 G3 - Red1 x Innovative-RC Big Bore Shock Socks - Purple3 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x 4x Complete Innovative Red Anodized Savage Shocks1 x M3x3 Grub Set screw3 x 29cc Piston Rebuild Kit Set (36mm)1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x High Response Clutch Spring - Red1 x Engine Clutch bottom spacer RED - 875711 x Short Big Bore Rod Ends - M81 x 4mm flexable brake pipe1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x Brake plate spacer - 874971 x IRC Black HD Rear Big Bore Springs1 x Torx Screw Kit Elcon etc - High tensile Steel1 x DBXL Top shock cap Bush 5mm1 x 2x Flanged 10x6x3mm1 x IRC Red UHD Front big bore springs - Losi 5T1 x M5x5 Grub Set Screw1 x HPI BAja Left Side Engine Mount Brace - 874893 x Baja Shock Top Mounts - Front2 x 2x 17x30x7mm Ball Bearing Rubber Shield- B0922 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0302 x Engine Clutch bottom spacer 6.5mm - 875712 x CRT Tower Set - Silver2 x M4x16 Countersunk Socket head cap screws - bag 102 x 3x6x0.3 Steel Shim - Pack 102 x Rear Big Bore Shocks - Losi 5ive Silver2 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK2 x Big Bore Shock 4 Hole Piston1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Losi 5ive-T 2.0 servo single arm V2.03 x M5 Hank rivet bush - Bag102 x CY 27cc Piston ring - 35x1mm2 x M4x30 Countersunk Socket head cap screws - bag 102 x Air Filter Gasket2 x Brake pad screws - IRC Center Tower to IRC Pads2 x M6 Rod Ends - Left hand thread2 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch2 x Brake plate spacer RED - 874972 x Baja Diff Cup side screws1 x Blue Anodized Shock Cap1 x M3x10 Socket head cap screws - bag 101 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Left Spacer Black - 875711 x M3x25mm Socket Cap Screw - BAG 101 x Losi 5ive Hing Pins A-Arms1 x Rear Big Bore Shocks - Losi 5ive Red1 x Losi 5ive Spring Adjuster Ring1 x IRC Red UHD Front big bore springs1 x M6 Rod Ends - Right hand thread1 x M3 washers - Zinc plated bag 202 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x Flywheel Nut1 x 2x 15x28x7mm Ball Bearing Rubber Shield2 x Black Shock Spring Adjuster Ring1 x Big Bore Shock Blank Piston1 x 10x16x0.3 Steel Shim - Pack 102 x Front Big Bore Shocks - Losi 5ive Black1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Big Bore Shock 3 Hole Piston DUAL Rate1 x Losi 5ive Engine mount inserts - #182 x Shock Bottom End Cap1 x Engine Clutch bottom spacer Blue - 875711 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive
Reviews
Center Tower full kit
Center Tower full kit
$187.18

Fantastic Product - lighter and stronger than you think. Bea...