Innovative-RC MT4 Chassis

£65.00

Product may vary slightly from image representation.
  • Model:MT4-chassis
Available Options
Live Stock Check: 0 units
Share This Product

 


Innovative-RC Thunder Tiger MT4 Chassis is made from 4mm 6082-T6 for the ultimate high strength chassis resulting in reduced chassis flex.

We have added chamfered droop areas to this chassis just like our Muggy chassis for vastly improved set-up for droop down travel adjustment allowing for even more performance enhancements for when racing on the track giving to a much improved ground handling over jumps and in tight corners allowing for more grip on the track for improved lap times!(adjustment of droop screws may be needed to retain a stock like setup)

Also added are custom mounting locations for  RX Box, Lipo battery tray, ESU Box allowing for a trayless setup to be run on the chassis (items available separate from innovative-RC).

Also included are 6x chassis gaskets for mounting under the front & rear diff/bulkheads to stop dirty entering into these areas. aiding in a longer gear and maintenance free life.

The chassis is available in Silver/Clear anodize , Black, Blue & Red anodized brushed finished surface.

Please pick colour to the side before ordering.
Please note this is a pre-order only listing, we hope to have this item in stock and shipping on or before 14/11/14. any questions please contact us,

Included Items:-
1x I-RC MT4 Chassis brushed anodized finished surface.
6x Chassis Diff Gaskets.
1x Set of stickers.

Items needed:
NONE

Optional Items:
Innovative-RC Battery Tray
Innovative-RC  RX Box
Innovative-RC  ESU Tray

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x I-RC Flywheel Puller tool1 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x M3 Nylock nut bag of 201 x Big Bore Shock 3 Hole Piston1 x Innovative-RC TT MT4 trayless Kit - Blue1 x Center Tower throttle supports1 x 1x Losi Muggy Diff Cup - Silver1 x Engine Clutch bottom spacer RED - 875711 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x M4x12 Socket head cap screws - bag 101 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Shock O-Ring Kit1 x V2 Savage + MCD Heavy Duty Baja Shock Shaft - 8mm1 x M4 Washer Zinc plated bag 201 x IRC Front MID Front big bore springs - Losi 5T1 x HPI BAja Left Side Engine Mount Brace - 874891 x Big Bore Shock Body All Colours - Losi Front1 x Big Bore Shock 5 Hole Piston1 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x Baja Bush Set1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Innovative-RC Big Bore Shock Socks - Green1 x HPI Baja stearing servo adapter mount - Black1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x 4x Savage Steering post bearings - 6x10x3mm1 x 2x Savage Diff Cup Case1 x HPI Baja wheel drive pin 5x24- 965041 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x CY 26cc Piston ring - 34x0.7mm1 x Big Bore Shock 2 Hole Piston1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 8x Shock Standoffs - Buggy Shocks1 x M4x30 Countersunk Socket head cap screws - bag 101 x Rear Fuel tank plate support bracket1 x ProLux Stone Fuel Filter - Grey1 x IRC Red UHD rear big bore springs - Losi 5T1 x Skid plate for Standard LCG TVPs1 x Shock Tower Brace - Blue1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x 2x Flanged Rubber Shield 10x6x3mm1 x Baja Upper Front Arm Brace Upper Blue1 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x 10x 6mm Body Clip - Rpin1 x Shock Hardware - screws, nuts etc1 x Innovative-RC Hoodie - Size XXXX Large1 x Carburetor Gasket1 x IRC ESC Box - MT41 x Steering Crank shaft1 x 50x 6mm Body Clip Bulk - Rpin1 x CY 2 Bolt Gasket set rebuild kit1 x HPI Baja Rear Brace 4mm - 874881 x Crankcase engine Seal set - Nitrile type1 x Roll Bar for HPI Savage 3mm1 x Losi Titanium Grade 5 King Pins B20741 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x Flywheel Nut1 x Engine / Cylinder Cover1 x Diff/Bulkhead Housing - Front Silver1 x Diff/Bulkhead Housing - Rear Silver B25421 x LCG TVPs, Exstended 1inch back with 6mm Front1 x Futaba type sliding charing switch1 x 27cc Piston Rebuild Kit Set (35mm)1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 29cc Piston Rebuild Kit Set (36mm)1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Black Adjuster Ring1 x IRC Hing Pins Full Set V2 - 10Pins1 x Black Big Bore shock Spring Retainers - Aluminium1 x Maxima Air Filter Cleaner - Spray1 x Innovative-RC Big Bore Shock Socks - Orange1 x Rear Shock end Ball - 11mm
Reviews
HPI Baja Front Upper Plate 4mm - 87484
HPI Baja Front Upper Plate 4mm - 87484
£22.00

an awesome upgrade to any baja, a lot more strength than a s...