4mm Standard LCG TVPs Package - 4mm

This package contains everything needed to fit the HPI Savage with LCG TVPs
Included in this package deal is one set of standard length LCG TVPs for the HPI savage, LCG Engine plate and Skid plate. included is also a full set of hardened socket cap head screws for fitting all the savage parts to the

Included :-
1x Set of Standard LCG TVPs. Weight of TVPs = 275grams (9.7oz) (individual = 140grams (4.9oz))
1x Engine plate for standard LCG TVPs. weight of 62.5grams (2.2oz)
1x Skid plate package. weight of 75 grams (2.6oz)
1x TVP Screw set kit - Contains M3,M4,M3 Countersunk hardened socket cap screws.

Skid plate package contains :-
2x Cross braces.
1x Skid plate.
4x M3x12 Countersunk socket cap screws.
4x M3x12 Socket cap screws.

Part Specs are as follows :-

TVPs:-
These TVPs lowered on the Engine and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminum giving a added 60% overall of strength to the savage.

TVP Specs are:
12mm lowered on Engine & Gearbox.
6mm overall extension (3mm front and back) due to drop in angel of dog bones. but still uses stock dog bones front and back.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them. Also two taped M3 screw holes for roll bar screws for that extra needed solid fixing of roll bar when bashing.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.

Engine plate Specs:
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG standard TVPs.

Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Included:-
1x Skid Plate.
2x Cross braces.
4x M3x12 Countersunk socket cap Screws.
4x M3x13 Socket Cap screws.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6