4x Complete Innovative Black Anodized Savage Shocks

$160.47

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CVD inner Drive set Pins 5x22mm1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x IRC BLACK MID rear big bore springs - Losi 5T2 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x DBXL Top shock cap Bush 5mm2 x IRC Red UHD Front big bore springs - Losi 5T2 x Big Bore Shock Body All Colours - Losi Front2 x HPI Baja Shorty Servo Mount Brace1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm2 x IRC Front MID Front big bore springs - Losi 5T1 x CY Flywheel / Fan Cover1 x 10x16x0.1 Steel Shim - Pack 101 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Losi DBXL front & rear shock end ball1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Baja Shock Spring Retainer - LST1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CY 4 Bolt Gasket set rebuild kit1 x Innovative-RC Hoodie - Size Large1 x 29cc Piston (36mm)1 x Carburetor Gasket1 x Innovative-RC T-Shirt - Size Medium1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Baja Shock Top Mounts - Front1 x Baja Upper Front Arm Brace Upper Red1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x CVD Pin rebuild kit - B32171 x M6 washers - Zinc plated bag 201 x Losi 5ive Engine mount inserts - #181 x Engine Clutch bottom spacer stock - 875711 x 26cc piston (34mm)1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x HPI Baja Rear Brace RED 4mm - 874881 x Thunder Tiger Front/Rear outdrive1 x Spur Gear Spacer - 866161 x 24mm Wheel Nuts - GRP & MCD Wheels1 x IRC Red UHD Front big bore springs1 x CY Exhaust Gasket1 x IRC ESC Box - MT41 x Baja Front lower arm brace Red - 874811 x Front - Antiroll Bar brace1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x Rear Big Bore Shocks - Losi 5ive Blue1 x Losi 5ive-T 2.0 servo single arm V2.01 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x Baja Front Upper Brace Blue - 874811 x Turnbuckle / Tie-Rod relocation bracket1 x M4x16 Socket head cap screws - bag 101 x 4x Complete Innovative Black Anodized Savage Shocks1 x HPI BAja Left Side Engine Mount Brace RED - 874891 x 10x 3.5mm Body Clip - Rpin1 x Diff/Bulkhead Housing Screw Set1 x HPI Baja Rear Brace 4mm - 874881 x losi 5ive diff inserts1 x Innovative-RC TT MT4 trayless Kit - RED1 x 4x8x0.3 Steel Shim - Pack 101 x Engine / Cylinder Cover1 x Diff/Bulkhead Housing - Rear Silver B25421 x Losi 5ive Hing Pins A-Arms1 x Clutch Shoe Holder Mount1 x CY 2 Bolt Gasket set rebuild kit1 x M4x16 Countersunk Socket head cap screws - bag 101 x Left Spacer - 875711 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Baja Diff gear Drive pin - 965011 x Wheel Spacer Adapters - GRP & MCD Wheels1 x 4mm flexable brake pipe1 x M5x5 Grub Set Screw1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x M3x10 Button Head Socket cap screws - bag 101 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x Innovative-RC Hoodie - Size Small1 x Front Big Bore Shocks - Losi 5ive Black1 x M3x16 Countersunk Socket head cap screws - bag 101 x Dgobone Drive Pin Set 5x24mm1 x IRC Black HD Rear Big Bore Springs1 x 8x Shock Standoffs - Standard Shocks1 x Ceter tower diff mounts Front & Rear1 x Innovative-RC Foam Filter Oil - 100ml1 x Baja Diff bush - B0801 x Front Big Bore Shocks - Losi 5ive Blue1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x High Response Clutch Spring - Red1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x Savage Shock Bottom End Cap1 x Baja Big Bore Shock O-Ring Kit1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x Losi 5ive Engine mount inserts - #191 x HPI Baja Brake Calliper1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x Air Filter Gasket1 x Left Spacer Black - 875711 x Piston Pin Washer Set1 x Losi 5T 5B Shock Towers - Front1 x CY 23cc Piston Ring - 32x1mm1 x Thunder Tiger MT4 CVD Universal rebuild1 x Savage Big Bore shock Socks - Black1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 27cc Piston Rebuild Kit Set (35mm)1 x MCD Fork Ends set 4 - 8mm1 x O-Ring Diff Cups - 5.5x2mm1 x M3 Spring Washer Zinc plated - bag 201 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Flux Black Anodized Standard LCG TVP Kit1 x HPI Baja stearing servo adapter mount - Blue1 x Innovative-RC Big Bore Shock Socks - Blue1 x SuperSwitchHD - 1x1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x M3x5 Button Head Socket cap screws - bag 101 x Clear Anodized Shock Cap1 x 26cc Piston Rebuild Kit Set (34mm)1 x 4x Savage Steering post bearings - 6x10x3mm1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x Brake pad screws - IRC Center Tower to stock Pads1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x Big Bore Shock 5 Hole Piston1 x Shock Bottom End Cap1 x 1x Losi 8ight-T Diff Cup - Black1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x M2 Captive Nuts / T Nuts - Bag 101 x Crank Case Engine Snap Ring1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x Center Tower top plate for truck V1.01 x Big Bore Shock 3 Hole Piston1 x 1x Losi Muggy Diff Cup - Silver1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x CY Engine FlyWheel (Rotor)1 x Innovative-RC TT MT4 trayless Kit - Blue1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Innovative-RC Carbon Fiber replacement Pads1 x M4x10 Socket head cap screws - bag 101 x Front Big Bore Shocks - Losi 5ive Red1 x 3x6x0.3 Steel Shim - Pack 101 x Brake pad screws - IRC Center Tower to IRC Pads1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x HPI Savage Screw kit (all models) - High tensile1 x 3x Losi 8ight-T Diff Cup - Black1 x Center Tower throttle supports1 x M3 washers - Zinc plated bag 201 x M3 Captive Nuts / T Nuts - Bag101 x Shock O-Ring Kit1 x Baja Bush Set1 x M3x10 Countersunk Socket head cap screws - bag 101 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x IRC Red UHD rear big bore springs1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x M4x12 Socket head cap screws - bag 101 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x Savage Rod End 10mm Balls1 x Center Tower to Clutch suport brace V2.01 x Center Tower to Clutch suport brace V1.01 x HPI Firestorm battery box1 x Innovative-RC Big Bore Shock Socks - Green1 x V2 Savage + MCD Heavy Duty Baja Shock Shaft - 8mm1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x 3x Thunder Tiger Differential Case MT4 G3 Silver1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x HPI BAja Left Side Engine Mount Brace - 874891 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x HPI Baja stearing servo adapter mount - Black1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x 29cc Piston Rebuild Kit Set (36mm)1 x HPI Baja Screw Kit (all models) - High tensile1 x Innovative-RC Big Bore Shock Socks - Orange1 x CY 26cc Piston ring - 34x0.7mm1 x Innovative-RC Muggy Chassis - Black1 x High response clutch set - Red Spring1 x M3x20 Socket Cap Screws - Bag of 101 x M2.5 Nylock Nuts - Bag 101 x M6 Hank rivet bush - Bag101 x NGK Spark Plug CMR5H
Reviews
High response clutch set - Red Spring
High response clutch set - Red Spring
$24.06

<p>great quality for price need to keep these in stock</p>...