4x Complete Innovative Silver Anodized Savage Shocks

$149.76

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 0 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
     
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Innovative-RC Muggy radio tray set1 x DBXL Top shock cap Bush 5mm1 x losi 5ive diff inserts1 x CVD Pin rebuild kit - B32171 x 50x 6mm Body Clip Bulk - Rpin1 x IRC Red UHD rear big bore springs - Losi 5T1 x M3x8 Socket head cap screws - bag 101 x CVD inner Drive set Pins 5x20mm1 x M3x16 Countersunk Socket head cap screws - bag 101 x M8x20 Socket head cap screws - bag 61 x 4 Bolt Cylinder Gasket1 x M3x5 Button Head Socket cap screws - bag 103 x Big Bore shock Spring Retainers - Aluminium1 x 6x Differential Gaskets - TT1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x Losi 5ive Front and rear shock end ball1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x Blue Anodized Shock Cap1 x Silkolene - Foam Filter Oil 1L1 x HPI Baja Front Upper Plate 4mm - 874841 x Flux Black Anodized 1"+6mm LCG TVP Kit2 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Nitro Engine Piston Stopper1 x CRT Tower Set - Silver1 x T PushFit Connector 4mm1 x G270RC Petrol RC Engine - 2 Stroke1 x Battery box bracket HPI Rush box - Savage X2 x Bearing Puller1 x X Upgrade Kit1 x HPI Baja wheel drive pin - 965041 x M6 Captive Nuts / T Nuts - Bag102 x Baja Bush Set - Black1 x M3x10 Socket head cap screws - bag 101 x Brake pad screws - M5 to IRC pads1 x Black Anodized Shock Cap1 x Big Bore Shock Blank Piston1 x Diff/Bulkhead Housing - Front Silver1 x M3x10 Button Head Socket cap screws - bag 101 x IRC Hing Pins Rear Bottom V2 - 866351 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x Out Drive Cup Pins - Bag 61 x 4x Complete Innovative Red Anodized Savage Shocks1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Black Big Bore shock Spring Retainers - Aluminium1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x SuperSwitchHD - 1x1 x IRC RX Box Set - MT41 x Shock Bleed Screw - 4x1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x F270 4Bolt With Filter, Pullstart & Carb1 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x IRC Hing Pins Full Set V2 - 10Pins1 x 27cc (35mm) Cylinder Head 4 Bolt1 x Brake pad screws - M4 Tower to IRC pads1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x M4x12 Socket head cap screws - bag 101 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x MCD V4 RaceRunne Big Bore Shocks Blue V2 - Set 4x1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Flywheel Key1 x M4x4 Grub/Set Screw1 x Piston Snap Ring Set1 x HPI Baja wheel drive pin 4x281 x differential cross pins TT MT4 - 2x1 x Big Bore shock Spanner1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Standard Race LCG TVP Kit1 x Losi 5ive Spring Retainers1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Losi 5ive top shock mounts1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x 10x 6mm Body Clip - Rpin1 x HPI Baja wheel drive pin 5x24- 965041 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Black Anodized Shock Body2 x Diff/Bulkhead Housing - Rear Silver B25421 x Black Anodized Shock Cap1 x insulator gasket1 x Baja Diff Cup side screws1 x Front Big Bore Shocks - Losi 5ive Black1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x F230 4Bolt With Filter, Pullstart & Carb1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x Full X upgrade Kit1 x 1x Losi Muggy Diff Cup - Silver1 x M3x10 Countersunk Socket head cap screws - bag 101 x Losi 5ive-T 2.0 servo single arm V2.01 x M3x35 Socket head cap screws - bag 101 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212
Reviews
Innovative-RC HPI Baja under chassis brace V2 - Blue
Innovative-RC HPI Baja under chassis brace V2 - Blue
$19.96

I received this along with my Innovative-RC chassis and stra...