Diff/Bulkhead Housing - Rear Silver B2542

197.69€

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Innovative-RC Muggy radio tray set1 x DBXL Top shock cap Bush 5mm1 x losi 5ive diff inserts1 x CVD Pin rebuild kit - B32171 x 50x 6mm Body Clip Bulk - Rpin2 x IRC Red UHD rear big bore springs - Losi 5T2 x M3x8 Socket head cap screws - bag 102 x CVD inner Drive set Pins 5x20mm4 x M3x16 Countersunk Socket head cap screws - bag 101 x M8x20 Socket head cap screws - bag 61 x 4 Bolt Cylinder Gasket3 x M3x5 Button Head Socket cap screws - bag 104 x Big Bore shock Spring Retainers - Aluminium1 x 6x Differential Gaskets - TT1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)2 x Losi 5ive Front and rear shock end ball2 x Ultra Heavy Duty Front Center Dogbone - 78mm2 x Blue Anodized Shock Cap1 x Silkolene - Foam Filter Oil 1L1 x HPI Baja Front Upper Plate 4mm - 874842 x Flux Black Anodized 1"+6mm LCG TVP Kit4 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Nitro Engine Piston Stopper2 x CRT Tower Set - Silver2 x T PushFit Connector 4mm2 x G270RC Petrol RC Engine - 2 Stroke2 x Battery box bracket HPI Rush box - Savage X4 x Bearing Puller2 x X Upgrade Kit3 x HPI Baja wheel drive pin - 965041 x M6 Captive Nuts / T Nuts - Bag103 x Baja Bush Set - Black2 x M3x10 Socket head cap screws - bag 102 x Brake pad screws - M5 to IRC pads2 x Black Anodized Shock Cap1 x Big Bore Shock Blank Piston2 x Diff/Bulkhead Housing - Front Silver2 x M3x10 Button Head Socket cap screws - bag 103 x IRC Hing Pins Rear Bottom V2 - 866352 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T2 x Out Drive Cup Pins - Bag 62 x 4x Complete Innovative Red Anodized Savage Shocks3 x 2x Losi LST1 & LST2 Diff Cup - Black2 x V3 Rear Big Bore Shocks - Baja 5B 5T2 x Black Big Bore shock Spring Retainers - Aluminium2 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x SuperSwitchHD - 1x2 x IRC RX Box Set - MT41 x Shock Bleed Screw - 4x1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x F270 4Bolt With Filter, Pullstart & Carb1 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x IRC Hing Pins Full Set V2 - 10Pins1 x 27cc (35mm) Cylinder Head 4 Bolt1 x Brake pad screws - M4 Tower to IRC pads1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x M4x12 Socket head cap screws - bag 101 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon4 x MCD V4 RaceRunne Big Bore Shocks Blue V2 - Set 4x1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Flywheel Key1 x M4x4 Grub/Set Screw2 x Piston Snap Ring Set2 x HPI Baja wheel drive pin 4x282 x differential cross pins TT MT4 - 2x2 x Big Bore shock Spanner2 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver2 x Standard Race LCG TVP Kit2 x Losi 5ive Spring Retainers1 x Ultra Heavy Duty Rear Center Dogbone - 83mm2 x Losi 5ive top shock mounts2 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x 10x 6mm Body Clip - Rpin1 x HPI Baja wheel drive pin 5x24- 965041 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32182 x Black Anodized Shock Body4 x Diff/Bulkhead Housing - Rear Silver B25422 x Black Anodized Shock Cap1 x insulator gasket2 x Baja Diff Cup side screws2 x Front Big Bore Shocks - Losi 5ive Black2 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 82 x F230 4Bolt With Filter, Pullstart & Carb2 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x Full X upgrade Kit2 x 1x Losi Muggy Diff Cup - Silver2 x M3x10 Countersunk Socket head cap screws - bag 102 x Losi 5ive-T 2.0 servo single arm V2.02 x M3x35 Socket head cap screws - bag 102 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32123 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32182 x Rear Big Bore Shocks - Losi 5ive Red1 x Shock Bottom End Cap2 x M3 Captive Nuts / T Nuts - Bag102 x Losi Steel King Pins B20742 x Black Shock Spring Adjuster Ring2 x Black Anodized 6mm Extended TVP Kit & Dog bone1 x IRC Hing Pins Front Bottom V2 - 866342 x IRC Hing Pins Rear Hub V2 - 866362 x Innovative-RC Muggy Chassis - Black3 x Rear Big Bore Shocks - Losi 5ive Silver2 x Baja Diff o-rings - bag101 x O-Ring Diff Cups - 9.5mmx2.5mm1 x IRC Front MID Front big bore springs - Losi 5T1 x MCD V4 RaceRunne Big Bore Shocks Silver V2 - Set 4x1 x Black Anodized Standard LCG TVP Kit2 x IRC Black HD Rear Big Bore Springs1 x M3 Nylock nut bag of 201 x 4mm Nylon brake pipe1 x O-Ring Diff Cups - 5.5x2mm1 x Innovative-RC Hoodie - Size XXX Large1 x 2x 9x24x7mm Ball Bearing Rubber Shield1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Flywheel Nut1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x M3x12 Socket head cap screws - bag 101 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x M5x5 Grub Set Screw1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x Front Big Bore Shocks - Losi 5ive Silver1 x Spur Gear Spacer - 866161 x Innovative-RC T-Shirt - Size Medium1 x Rear Chassis Plate 7075-T6 V3 - 874821 x 3x Losi Muggy Diff Cup - Silver1 x Front Heavy Duty losi Shock Shaft - 8mm1 x Crankcase engine Seal set - Nitrile type1 x HPI BAja Left Side Engine Mount Brace - 874891 x M4x10 Countersunk Socket head cap screws - bag 101 x Extended 6mm Race TVP Kit1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x 90Deg PushFit 4mm tube M51 x IRC Red UHD Front big bore springs - Losi 5T1 x M3x3 Grub Set screw1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x CY stock crank set1 x TurtleRacing Rear shock mounts1 x CY Pull Start Assembly1 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Piston Pin Washer Set1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Losi 5T 5B Shock Towers Bash - Front BLUE1 x Innovative-RC TT MT4 trayless Kit - RED1 x CY 4 Bolt Gasket set rebuild kit1 x 4x8x0.3 Steel Shim - Pack 101 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x Outdrive cup shaft Orings1 x Rear Big Bore Shocks - Losi 5ive Black1 x Innovative-RC Hoodie - Size XXXX Large1 x M6 Hank rivet bush - Bag10
Reviews
1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty
1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty
8.13€

Excellent quality drive shaft. Alot thicker than standard sh...