4x Complete Innovative Black Anodized Savage Shocks

$160.47

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Rear Heavy Duty losi Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbones 121mm1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm2 x Front Heavy Duty losi Shock Shaft - 8mm1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x CVD inner Drive set Pins 5x22mm2 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY2 x IRC BLACK MID rear big bore springs - Losi 5T1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x DBXL Top shock cap Bush 5mm1 x IRC Red UHD Front big bore springs - Losi 5T1 x Big Bore Shock Body All Colours - Losi Front1 x CY Flywheel / Fan Cover1 x HPI Baja Shorty Servo Mount Brace1 x IRC Front MID Front big bore springs - Losi 5T1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x Innovative-RC Hoodie - Size XXXX Large1 x 10x16x0.1 Steel Shim - Pack 101 x Losi DBXL front & rear shock end ball1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x 1x Savage Diff Cup Case1 x Baja Shock Spring Retainer - LST1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Baja Brake Kit - Full Set all Models1 x Innovative-RC T-Shirt - Size Medium1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x Baja Upper Front Arm Brace Upper Red1 x Innovative-RC Hoodie - Size Large1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Turnbuckle / Tie-Rod relocation bracket1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Engine Clutch bottom spacer stock - 875711 x IRC Hing Pins Rear Bottom V2 - 866351 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Battery box bracket HPI Rush box1 x 50x 6mm Body Clip Bulk - Rpin1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x 24mm Wheel Nuts - GRP & MCD Wheels1 x M4x16 Countersunk Socket head cap screws - bag 101 x Blue Big Bore shock Spring Retainers - Aluminium1 x 10x 3.5mm Body Clip - Rpin1 x M4x16 Socket head cap screws - bag 101 x Diff/Bulkhead Housing - Front Silver1 x Crankcase engine Seal set - Nitrile type1 x Spur Gear Spacer RED - 866161 x Baja Diff Oring Seal1 x Left Spacer - 875711 x M3x8 Countersunk cap screws - bag 101 x CY 29cc Piston ring - 36x1mm1 x I-RC Losi Big Bore rear shock Spring - 44lb1 x M4 Captive Nuts / T Nuts - Bag101 x CY Exhaust Gasket1 x CY Pull Start Assembly1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x Losi Titanium Grade 5 King Pins B20741 x Servo Y Lead JR, Futaba, Hitec etc1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x HPI Baja Rear Brace 4mm - 874881 x Shock Tower Brace - Silver1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x 4 Bolt Cylinder Gasket1 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x LipoBox - 6S1 x CRT Chassis Gaskets1 x M4x30 Socket head cap screws - bag 101 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Carb & Exhaust screws - 154821 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x Front - Antiroll Bar brace1 x differential cross pins TT MT4 - 2x1 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x LipoBox - 4S1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Clutch Spring - Yellow1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x M5x5 Grub Set Screw1 x CY Replacement Crank Case Gasket1 x Torx Screw Kit Elcon etc - High tensile Steel1 x CY 23cc Piston Ring - 32x1mm1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x MCD Fork Ends set 4 - 8mm1 x Rear Big Bore Shocks - Losi 5ive Red1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x Baja Diff gear Drive pin - 965011 x Front Big Bore Shocks - Losi 5ive Silver1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x M6 Rod Ends - Left hand thread1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x 27cc Piston Rebuild Kit Set (35mm)1 x differential cross pins TT MT4 - 6x1 x 4x Complete Innovative Red Anodized Savage Shocks1 x Rear Chassis Plate 7075-T6 V3 - 874821 x Losi 5ive Hing Pins A-Arms1 x Front Big Bore Shocks - Losi 5ive Black1 x CY Pull Start Assembly - Metal grab1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x center tower brake cam set1 x M3x16 Countersunk Socket head cap screws - bag 101 x M3x10 Button Head Socket cap screws - bag 101 x Baja Bush Set - Black1 x M8x25 Socket head cap screws - bag 61 x Dgobone Drive Pin Set 5x24mm1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Piston Pin 23 & 26cc - 8x25mm1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x 3x Losi 8ight-T Diff Cup - Silver1 x Center Tower top plate for truck V2.01 x Baja Big Bore Shock O-Ring Kit1 x 4mm flexable brake pipe1 x Short Big Bore Rod Ends - M81 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Innovative-RC Foam Filter Oil - 100ml1 x Savage Big Bore shock Socks - Black1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x Baja Diff bush - B0801 x innovative-rc Losi 5ive Diff Cup / Case1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x Piston Pin Washer Set1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x 8x Shock Standoffs - Standard Shocks1 x Losi 5ive Diff Gaskets - 6x1 x Losi 5T 5B Shock Towers - Front1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x M2 Captive Nuts / T Nuts - Bag 101 x Battery box bracket HPI Rush box - Savage X1 x M3x5 Button Head Socket cap screws - bag 101 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Baja Diff Cup side screws1 x IRC Hing Pins Rear Top V2 - 866351 x CY Engine FlyWheel (Rotor)1 x HPI Baja Brake Calliper1 x Front Big Bore Shocks - Losi 5ive Blue1 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x 26cc Piston Rebuild Kit Set (34mm)1 x IRC Black HD Rear Big Bore Springs1 x M3x12 Countersunk Socket head cap screws - bag 101 x Baja Diff o-rings - bag101 x Left Spacer Black - 875711 x M3x3 Grub Set screw1 x Clear Anodized Shock Cap1 x Baja Front Upper Brace - 874811 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x 1x Losi 8ight-T Diff Cup - Black1 x Air Filter Gasket1 x Baja Rear lower arm brace Red - 874801 x 29cc Piston Rebuild Kit Set (36mm)1 x Losi 5ive Engine mount inserts - #191 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x Innovative-RC Muggy radio tray set - Black1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Engine Clutch bottom spacer RED - 875711 x Innovative-RC Muggy Chassis - Silver1 x HPI Baja stearing servo adapter mount - Blue1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x Innovative-RC Big Bore Shock Socks - Blue1 x M3x10 Countersunk Socket head cap screws - bag 101 x M4 Nylock nut bag of 201 x M4x12 Socket head cap screws - bag 101 x Shock Bush short
Reviews
Innovative-RC HPI Baja 5B 5T enclosed chassis
Innovative-RC HPI Baja 5B 5T enclosed chassis
$160.47

I bought a silver one recently off Rob having seen them on v...