4x Complete Innovative Silver Anodized Savage Shocks

141.69€

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 0 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
     
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x UHD Innovative-RC BAJA dogbones 121mm3 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32163 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm2 x Front Heavy Duty losi Shock Shaft - 8mm1 x CVD inner Drive set Pins 5x22mm1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32182 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x IRC BLACK MID rear big bore springs - Losi 5T1 x DBXL Top shock cap Bush 5mm1 x IRC Red UHD Front big bore springs - Losi 5T1 x Big Bore Shock Body All Colours - Losi Front1 x HPI Baja Shorty Servo Mount Brace1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x Innovative-RC Hoodie - Size XXXX Large1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x 10x16x0.1 Steel Shim - Pack 101 x Losi DBXL front & rear shock end ball1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x Innovative-RC Hoodie - Size Large1 x Baja Upper Front Arm Brace Upper Red1 x MT4 Chassi Gaskets - 6x1 x 29cc Piston (36mm)1 x Carburetor Gasket1 x UHD Innovative-RC BAJA dogbones Exstended- 1049662 x IRC Front MID Front big bore springs - Losi 5T1 x CY Flywheel / Fan Cover2 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x CY Exhaust Gasket1 x Losi 5ive Engine mount inserts - #182 x Flywheel Key2 x Baja Front Upper Brace Blue - 874812 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x CY stock crank set2 x Thunder Tiger Differential Case MT4 G3 - Red2 x Blue Big Bore shock Spring Retainers - Aluminium2 x Losi 5T 5B Shock Towers Bash - Rear BLACK2 x M3x8 Countersunk cap screws - bag 102 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V22 x Turnbuckle / Tie-Rod relocation bracket2 x IRC Hing Pins Front Top V2 - 866332 x 4x Complete Innovative Black Anodized Savage Shocks2 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm2 x I-RC Losi Big Bore rear shock Spring - 44lb2 x I-RC Losi Big Bore front shock Spring - 44lb2 x HPI BAja Left Side Engine Mount Brace RED - 874892 x 23mm Heavy Duty wheel hex - Complete Set (4x)2 x I-RC Baja Big Bore rear shock Spring - Stock2 x CY 29cc Piston ring - 36x1mm2 x Carburetor Set WT6682 x 4mm Nylon brake pipe2 x Battery box bracket HPI Rush box2 x IRC RX Box Set - MT42 x Losi 5T 5B Shock Towers V2 - Rear2 x Shock Bleed Screw - 4x2 x Losi 5ive Engine mount inserts - #202 x IRC Hing Pins Rear Hub V2 - 866362 x Big Bore Shock 5 Hole Piston DUAL Rate2 x 10x 3.5mm Body Clip - Rpin2 x Engine / Cylinder Cover 4 Bolt2 x 2x Flanged 10x6x3mm2 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874872 x Baja Rear Lower Brace 2 Blue - 874792 x Skid Plate for Exstended 1inch back, 6mm Front TVPs2 x Engine Clutch bottom spacer Black - 875712 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x HPI Baja Front Upper Plate 4mm Black Anodized - 874842 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874902 x Innovative-RC T-Shirt - Size Large2 x Piston Roller Pin Bearing2 x Front Axel - Thunder Tiger MT4 CVD Universal2 x Innovaitve-RC Shock Piston2 x HPI Baja Rear Brace 4mm - 874882 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite2 x Rear Big Bore Shocks - Losi 5ive Silver2 x Brake plate spacer RED - 874972 x Big Bore Shock 4 Hole Piston DUAL Rate2 x Ultra Heavy Duty Front Center Dogbone - 78mm2 x Losi 5ive top shock mounts2 x Baja Front Lower Brace Blue - 874782 x Diff/Bulkhead Housing - Rear Silver B25422 x Engine / Cylinder Cover2 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies2 x 4x8x0.3 Steel Shim - Pack 102 x Left Spacer RED- 875712 x Clutch Shoe Holder Mount2 x Innovative-RC TT MT4 trayless Kit - RED2 x Baja Diff Oring Seal2 x HPI Baja wheel drive pin 4x282 x CY Pull Start Assembly - Metal grab2 x I-RC Losi Big Bore rear shock Spring - 66lb2 x losi 5ive diff inserts1 x Servo Y Lead JR, Futaba, Hitec etc2 x Mugen Fuel Tank Mounts2 x CY 2 Bolt Gasket set rebuild kit2 x 10x16x0.5 Steel Shim - Pack 102 x M4x16 Countersunk Socket head cap screws - bag 102 x Crankcase engine Seal set - Nitrile type2 x Spur Gear Spacer RED - 866162 x 3x Thunder Tiger Differential Case MT4 G3 Black2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm2 x Baja Diff gear Drive pin - 965012 x 4 Bolt Cylinder Gasket2 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc2 x Hellfire Fuel Tank Mounts2 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874792 x Roll Bar for HPI Savage 3mm2 x 27cc (35mm) Cylinder Head 2 Bolt2 x HPI Baja Rear Brace 4mm Black Anodized - 874882 x 50x 6mm Body Clip Bulk - Rpin2 x M6 Rod Ends & camber + steering ball set1 x Carb & Exhaust screws - 154821 x Left Spacer - 875711 x CY Pull Start Assembly1 x CY Replacement Crank Case Gasket1 x Flywheel Nut1 x Center Tower top plate for truck V2.02 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x M4x30 Socket head cap screws - bag 101 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0942 x 1x Losi Muggy Diff Cup - Black1 x Crankcase engine Seal set - Viton type1 x IRC Hing Pins Rear Bottom V2 - 866351 x CRT Chassis Gaskets1 x LCG TVPs, Exstended 1inch back with 6mm Front1 x Piston Pin 27 & 29cc - 8x281 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x M3x16 Countersunk Socket head cap screws - bag 101 x Rear Big Bore Shocks - Losi 5ive Red1 x 4mm flexable brake pipe1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x CVD inner Drive set Pins 5x20mm1 x Front - Antiroll Bar brace1 x CY Clutch case Housing1 x CY 4 Bolt Gasket set rebuild kit1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x 1x Savage Diff Cup Case1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Baja Bush Set - BLUE1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended
Reviews
Engine Clutch bottom spacer 6.5mm - 87571
Engine Clutch bottom spacer 6.5mm - 87571
2.95€

<p>i asked Innovative RC if they could make a engine clutch ...