Extended 6mm Race TVP Kit

£62.00

Product may vary slightly from image representation.
  • Model:ext6-race
Live Stock Check: 0 units
Share This Product

 

The ideal upgrade for any serious racer who is all ways looking for the best possible performance.
Allays trying to save them extra few seconds from a race lap or fed up of getting beaten by that split second now is your chance to save some critical weight and earn back them few vital seconds.

These TVPs are specially design with racing in mind where lightens is a key aspect while also maintaining the utmost critical strength within the design.

These TVPs are extended 6mm length and use the standard rear dog bone from the HPI Savage. TVPS are made from 6082-T6 2.5mm thick.
TVPs are full Mid tank ready with pre-drilled holes for fixing of servos and tank, Full mid tank kit (see our midtank kit page)

Weight comparison table :-

 

TVP Weight - TVPs Weight - Complete
2.5mm Innovative-RC EXT6 Race TVPs 5.7oz (160g) 10.6oz (302g)
4mm Innovative-RC bash TVPs 9.7oz (275g) 14.5oz (412g)
standard non LCG HPI 5.8oz (165g) ------
5mm LCG HPI TVP (SavageX) 5.4oz (152g) ------

Note: Weight- TVPs= weight of left & right TVP only, Weight complete= weight of TVP,Skid plate,engineplate & screws.
- weights above should be used as a guide line only.

Included Items :-
1x Front extended 6mm LCG Race TVPs.
1x LCG Engine plate.
1x Extended 6mm length skid plate.
1x TVP screw kit - Hardend grade 12.9 socket cap screws.

Detailed specification of parts:-
TVPs :-
These TVPs are lowered on the Engine and Gearbox giving the savage a more stable and lower ride height. These are made from 2.5mm thick 6082-T6 Aluminum.

12mm lowered on Engine & Gearbox.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them also allows for mounting of any standard roll bar.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG Race extended 6mm TVPs.
Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Roto Start:-
Please note, Roto unit will work with HPI quick access bulkheads found on savage X with no mods, when using standard hpi bulkheads please note ofna roto unit will need to be used or modding of the bulk head unit. after market bulks eg GPM work fine with out the cross brace and allow stock roto to be used.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbones 121mm3 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x Front Heavy Duty losi Shock Shaft - 8mm1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x CVD inner Drive set Pins 5x22mm1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x IRC BLACK MID rear big bore springs - Losi 5T1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x IRC Red UHD Front big bore springs - Losi 5T1 x Big Bore Shock Body All Colours - Losi Front1 x HPI Baja Shorty Servo Mount Brace1 x 10x16x0.1 Steel Shim - Pack 101 x Losi DBXL front & rear shock end ball1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x Baja Shock Spring Retainer - LST2 x DBXL Top shock cap Bush 5mm1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Innovative-RC Hoodie - Size Large2 x MT4 Chassi Gaskets - 6x1 x 26cc piston (34mm)1 x Baja Shock Top Mounts - Front2 x 29cc Piston (36mm)2 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x CY 4 Bolt Gasket set rebuild kit1 x Baja Bush Set - BLUE2 x UHD Innovative-RC BAJA dogbones Exstended- 1049662 x HoBao / Ofna 1/7th Fuel tank - 250cc2 x Innovative-RC T-Shirt - Size Medium2 x Carburetor Gasket2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended2 x Rear Big Bore Shocks - Losi 5ive Blue2 x Baja Front lower arm brace Red - 874812 x HPI Baja Rear Lower Brace Blue - 874802 x Thunder Tiger Front/Rear outdrive2 x HPI BAja Left Side Engine Mount Brace RED - 874892 x UHD Innovative-RC BAJA dogbones Standard- 1049662 x M6 washers - Zinc plated bag 202 x Losi 5ive Engine mount inserts - #182 x 23mm Heavy Duty wheel hex - Complete Set (4x)2 x 4x Complete Innovative Black Anodized Savage Shocks2 x Battery box bracket HPI Rush box2 x Turnbuckle / Tie-Rod relocation bracket2 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874872 x Flywheel Key2 x CY stock crank set2 x I-RC Baja Big Bore rear shock Spring - Stock2 x IRC Red UHD Front big bore springs2 x Spur Gear Spacer - 866162 x Engine Clutch bottom spacer stock - 875712 x Engine / Cylinder Cover 4 Bolt2 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm2 x 5x 2.5x14mm CVD Dowel Pins2 x 24mm Wheel Nuts - GRP & MCD Wheels2 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V22 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile2 x IRC ESC Box - MT42 x 4mm Nylon brake pipe2 x Blue Big Bore shock Spring Retainers - Aluminium2 x HPI Baja Rear Brace RED 4mm - 874882 x Thunder Tiger Differential Case MT4 G3 - Red2 x Outdrive cup shaft Orings1 x Losi 5ive-T 2.0 servo single arm V2.02 x Innovaitve-RC Shock Piston2 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks2 x Carburetor Set WT6682 x IRC Hing Pins Front Top V2 - 866331 x CY Exhaust Gasket2 x HPI Baja Rear Brace 4mm Black Anodized - 874882 x IRC RX Box Set - MT42 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Shock Bleed Screw - 4x1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x I-RC Losi Big Bore rear shock Spring - 44lb2 x Baja Diff Oring Seal2 x IRC Hing Pins Rear Bottom V2 - 866351 x 2x Flanged 10x6x3mm1 x Losi 5T 5B Shock Towers V2 - Rear1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x 10x 3.5mm Body Clip - Rpin1 x Crankcase engine Seal set - Viton type1 x CY 29cc Piston ring - 36x1mm1 x Diff/Bulkhead Housing Screw Set1 x Engine Clutch bottom spacer Black - 875711 x Rear Big Bore Shocks - Losi 5ive Silver1 x Innovative-RC TT MT4 trayless Kit - RED1 x IRC Hing Pins Rear Hub V2 - 866361 x Piston Roller Pin Bearing1 x Steering Crank shaft1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Ultra Heavy Duty Front Center Dogbone - 78mm
Reviews
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
£22.00

<p>As always excellent quality of service!!! And great parts...