4x Complete Innovative Black Anodized Savage Shocks

$160.47

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Big Bore Shock Body All Colours - Losi Front2 x HPI Baja Shorty Servo Mount Brace1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x IRC Front MID Front big bore springs - Losi 5T1 x CY Flywheel / Fan Cover1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Losi DBXL front & rear shock end ball1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Baja Shock Spring Retainer - LST1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CVD inner Drive set Pins 5x20mm1 x CY 4 Bolt Gasket set rebuild kit1 x Brake pad screws - M4 Tower to IRC pads1 x Baja Brake Kit - Full Set all Models1 x CY Clutch case Housing1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x 10x16x0.1 Steel Shim - Pack 101 x Innovative-RC Hoodie - Size XXXX Large1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Baja Bush Set - BLUE1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Losi 5ive-T 2.0 servo single arm V2.01 x Carburetor Gasket1 x 1x Savage Diff Cup Case1 x 50x 3.5mm Body Clip Bulk - Rpin1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x Engine Clutch bottom spacer stock - 875711 x 29cc Piston (36mm)1 x Innovative-RC Hoodie - Size Large1 x MT4 Chassi Gaskets - 6x1 x HPI Baja Rear Lower Brace Blue - 874801 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Spur Gear Spacer - 866161 x Innovative-RC Hoodie - Size XXX Large1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x 24mm Wheel Nuts - GRP & MCD Wheels1 x CY Exhaust Gasket1 x HPI Baja Rear Brace RED 4mm - 874881 x Baja Front lower arm brace Red - 874811 x CVD Pin rebuild kit - B32171 x M6 washers - Zinc plated bag 201 x IRC ESC Box - MT41 x Baja Upper Front Arm Brace Upper Red1 x Rear Big Bore Shocks - Losi 5ive Blue1 x IRC Hing Pins Front Top V2 - 866331 x Thunder Tiger Front/Rear outdrive1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x Losi 5ive Engine mount inserts - #181 x CY Replacement Crank Case Gasket1 x Carburetor Set WT6681 x Shock Cap O-Ring Spacers1 x I-RC Losi Big Bore front shock Spring - 44lb1 x 4x8x0.3 Steel Shim - Pack 101 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x Baja Rear Lower Brace 2 Blue - 874791 x Innovative-RC T-Shirt - Size Large1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x 26cc piston (34mm)1 x Losi 5ive Hing Pins A-Arms1 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x IRC Hing Pins Rear Hub V2 - 866361 x IRC RX Box Set - MT41 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Blue Big Bore shock Spring Retainers - Aluminium1 x Turnbuckle / Tie-Rod relocation bracket1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x CY stock crank set1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Piston Roller Pin Bearing1 x 10x 3.5mm Body Clip - Rpin1 x 4x Complete Innovative Black Anodized Savage Shocks1 x HPI Baja Rear Brace 4mm - 874881 x 4mm Nylon brake pipe1 x Rear Big Bore Shocks - Losi 5ive Silver1 x 10x16x0.5 Steel Shim - Pack 101 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Engine / Cylinder Cover1 x CRT Chassis Gaskets1 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x 1x Losi Muggy Diff Cup - Black1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x CY Pull Start Assembly - Metal grab1 x I-RC Baja Big Bore rear shock Spring - Stock1 x Servo Y Lead JR, Futaba, Hitec etc1 x Losi 5ive top shock mounts1 x Clutch Shoe Holder Mount1 x differential cross pins TT MT4 - 2x1 x M4x16 Countersunk Socket head cap screws - bag 101 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Front Heavy Duty losi Shock Shaft - 8mm1 x HPI Baja wheel drive pin 4x281 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x 27cc (35mm) Cylinder Head 2 Bolt1 x Baja Front Lower Brace Blue - 874781 x Spur Gear Spacer RED - 866161 x Losi Titanium Grade 5 King Pins B20741 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x losi 5ive diff inserts1 x Mugen Fuel Tank Mounts1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x Front - Antiroll Bar brace1 x 4mm flexable brake pipe1 x 2x Flanged 10x6x3mm1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x M4x30 Socket head cap screws - bag 101 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x 50x 6mm Body Clip Bulk - Rpin1 x M6 Rod Ends & camber + steering ball set1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x ProLux Light Weight rebuildable fuel filter - large1 x Engine Clutch bottom spacer Black - 875711 x 4 Bolt Cylinder Gasket1 x Roll Bar for HPI Savage 3mm1 x Front Big Bore Shocks - Losi 5ive Silver1 x M4 Captive Nuts / T Nuts - Bag101 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x Ceter tower diff mounts Front & Rear1 x Rear Big Bore Shocks - Losi 5ive Black1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Dgobone Drive Pin Set 5x24mm1 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x Baja Diff bush - B0801 x Baja Diff Cup side screws1 x CY Pull Start Assembly1 x CY Insulator manifold1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Front Big Bore Shocks - Losi 5ive Blue1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Losi 5T 5B Shock Towers - Front1 x Baja Rear lower arm brace Red - 874801 x Innovative-RC Carbon Fiber replacement Pads1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x Shock Bottom End Cap1 x M6 Rod Ends & Steering ball set1 x Big Bore Shock 3 Hole Piston1 x Savage Big Bore shock Socks - Black1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x Futaba type sliding charing switch1 x M3 Spring Washer Zinc plated - bag 201 x M3 washers - Zinc plated bag 201 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x M3x12 Countersunk Socket head cap screws - bag 101 x Baja Big Bore Shock O-Ring Kit1 x IRC Red UHD Front big bore springs - Losi 5T1 x Baja Bush Set1 x M8x25 Socket head cap screws - bag 61 x 27cc Piston Rebuild Kit Set (35mm)1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x HPI Firestorm battery box1 x M4x12 Socket head cap screws - bag 101 x 4x Savage Steering post bearings - 6x10x3mm1 x Flux Black Anodized Standard LCG TVP Kit1 x 3x Losi 8ight-T Diff Cup - Black1 x 3x6x0.3 Steel Shim - Pack 101 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x M2.5 Nylock Nuts - Bag 101 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x High Response Clutch Spring - Red1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x HPI Baja stearing servo adapter mount - Black1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x HPI Baja Brake Calliper - Blue Anodized1 x Innovative-RC Big Bore Shock Socks - Orange1 x HPI BAja Left Side Engine Mount Brace - 874891 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x M4x4 Grub Screws1 x M4x10 Countersunk Socket head cap screws - bag 101 x M3 Nylock nut bag of 201 x Center Tower throttle supports1 x 4-40x3/8 Button Head socket Screw - Bag 101 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x Black Anodized Shock Cap1 x CY 23cc Piston Ring - 32x1mm1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x IRC Hing Pins Full Set V2 - 10Pins1 x Thunder Tiger MT4 CVD Universal rebuild1 x 3x Losi Muggy Diff Cup - Silver1 x IRC Red UHD rear big bore springs1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x Big Bore Shock 2 Hole Piston1 x Shock Tower Brace - Blue1 x 27cc (35mm) Cylinder Head 4 Bolt1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x Shock Spring Retainer - LST Springs1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x MCD & Savage Shock Spring - 2.5mm1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x 2x Savage Diff Cup Case1 x TurtleRacing Rear shock mounts1 x IRC Hing Pin screw & washer set1 x 2 Bolt heavy duty Cylinder Gasket1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x Losi 5ive Front and rear shock end ball1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Out Drive Cup Pins - Bag 61 x Battery box bracket HPI Firestorm - Savage X1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x M8 Rod Ends for Big Bore Shocks1 x Baja Shock Spring Retainer - Slotted1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x M4x10 Button Head Socket cap screws - bag 101 x 8x Shock Standoffs - Buggy Shocks1 x HPI MT2 Diff Cup Case Silver - 1x1 x HPI Baja stearing servo adapter mount1 x Brake plate spacer - 874971 x M3x8 Socket head cap screws - bag 101 x M3x16 Socket head cap screws - bag 101 x Nitro Engine Piston Stopper1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x X Arm shock mounts - 4x1 x ProLux Stone Fuel Filter - RED
Reviews
HPI Baja Front Upper Plate 4mm - 87484
HPI Baja Front Upper Plate 4mm - 87484
$29.42

an awesome upgrade to any baja, a lot more strength than a s...