Diff/Bulkhead Housing - Rear Silver B2542

£170.00

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x HPI Baja Brake Calliper - Blue Anodized2 x 23mm Heavy Duty wheel hex - Complete Set (4x)3 x Baja Shock Spring Retainer - Slotted1 x Innovative-RC Muggy Chassis - Silver2 x Baja front lower arm brace Red - 874782 x Ultra Heavy Duty Rear Center Dogbone - 83mm2 x CRT Tower Set - Silver1 x 2x 10x15x4mm Ball Bearing Metal Shield- B0301 x Black Slotted Big Bore shock Spring Retainers - Aluminium2 x Steering Crank shaft2 x 8x Shock Standoffs - Buggy Shocks1 x M3 washers - Zinc plated bag 201 x Big Bore Shock 2 Hole Piston1 x Baja HPI B094: Ball Bearing 20x32x7mm5 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts3 x IRC Hing Pins Full Set V2 - 10Pins1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Baja Shock Top Mounts - Front2 x Baja Front lower arm brace Red - 874812 x 2x Savage Diff Cup Case2 x Baja Big Bore Shock O-Ring Kit2 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts2 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts2 x 6x Differential Gaskets2 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x HPI Baja stearing servo adapter mount - Black1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch2 x Shock Bleed Screw - 4x1 x Baja front Shock end Ball2 x Baja Shock Top Mounts - Rear2 x 1x Savage Diff Cup Case1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Baja Rear Lower Brace 2 - 874791 x CRT Chassis Gaskets3 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Black Shock Spring Adjuster Ring1 x CRT Tower Set - Nickel1 x X Arm shock mounts - 4x2 x 2x Flanged Rubber Shield 10x6x3mm2 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x Big Bore Shock 3 Hole Piston DUAL Rate2 x Baja Front Lower Brace Blue - 874782 x Baja Rear Lower Brace 2 Blue - 874792 x Baja Shock Spring Retainer2 x O-Ring Diff Cups - 5.5x2mm1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x M2.5 Nylock Nuts - Bag 101 x IRC Red UHD Front big bore springs - Losi 5T1 x Black Big Bore shock Spring Retainers - Aluminium1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x 3x Losi Muggy Diff Cup - Black1 x Baja Shock Spring Retainer - LST1 x M3x5 Button Head Socket cap screws - bag 103 x Maxima Air Filter Cleaner - Spray2 x 1x Losi Muggy Diff Cup - Black1 x Big Bore Shock 4 Hole Piston3 x Big Bore shock Spanner1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874792 x Baja Rear lower arm brace Red - 874791 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0942 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Baja Front Lower Brace - 874781 x Big Bore Shock 5 Hole Piston1 x IRC Hing Pin screw & washer set1 x Black Anodized Shock Cap1 x T PushFit Connector 4mm1 x Baja Front Upper Brace - 874811 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Innovative-RC Hong Nor CRT Chassis - Silver2 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x 4mm flexable brake pipe2 x M4x4 Grub Screws2 x 90Deg PushFit 4mm tube M51 x Savage Shock Bottom End Cap2 x Baja Shock spring retainer - Heavy Duty Springs1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x Baja Front Upper Brace Black Anodized 7075-T6 - 874813 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x 2x 12x24x6mm Ceramic Ball Bearing Rubber Shield- B0891 x Big Bore Shock 3 Hole Piston1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x Flux Standard LCG TVP Kit1 x 4mm Nylon brake pipe2 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield2 x Baja Bush Set - BLUE2 x Baja Rear lower arm brace Red - 874801 x M4 Nylock nut bag of 201 x HPI Baja Brake Calliper2 x Baja Front Upper Brace Blue - 874811 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x Innovative-RC Hoodie - Size XX Large1 x Baja Diff Cup side screws1 x Shock Bottom End Cap1 x Dgobone Drive Pin Set 5x24mm1 x Innovative-RC Mug1 x IRC Red UHD Front big bore springs2 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 10x 6mm Body Clip - Rpin1 x 27cc (35mm) Cylinder Head 4 Bolt1 x Losi 5ive Hing Pins A-Arms2 x 2x Flanged Bearing - 10x6x4 3speed1 x CY Pull Start Assembly - Metal grab2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended3 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x 10x16x0.1 Steel Shim - Pack 101 x 10x16x1.0 Steel Shim - Pack 101 x Innovative-RC Hoodie - Size XXX Large1 x IRC Red UHD rear big bore springs1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x 2x 5mm Thick Top Mount Brackets - Savage X1 x CY Clutch case Housing1 x Baja Diff gear Drive pin - 965011 x Outdrive cup shaft Orings1 x Shock Cap O-Ring Spacers1 x Innovative-RC T-Shirt - Size Medium1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Baja Bush Set - Black1 x 2x Aluminium Buggy Shock tower - NON X Savage1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black2 x 2x Top shock support brackets - Savage x1 x LipoBox - 6S1 x Baja Diff Oring Seal2 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Innovative-RC Dual Brake Kit1 x Pull Start Thumb Screws1 x 4x8x0.3 Steel Shim - Pack 102 x UHD Outdrive Rear HPI Baja 5SC size (2x) - 1049671 x 2x Losi LST1 & LST2 Diff Cup - Black1 x IRC Hing Pins Rear Hub V2 - 866361 x F270 4Bolt With Filter, Pullstart & Carb1 x UHD 5mm Outdrive Rear HPI Baja 5SC size (2x) - 1049671 x Innovative-RC TT MT4 trayless Kit - RED1 x F230 4Bolt With Filter, Pullstart & Carb1 x 2x 9x20x6mm Ball Bearing Rubber Shield3 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Innovative-RC Carbon Fiber replacement Pads1 x Innovative-RC Hoodie - Size XXXX Large2 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x DBXL Top shock cap Bush 5mm2 x 6x Screw Shaft M4x2x12mm2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x M4x30 Socket head cap screws - bag 101 x Innovative-RC T-Shirt - Size XLarge1 x 6x12x0.3 Steel Shim - Pack 102 x Innovative-RC T-Shirt - Size Large2 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x Big Bore shock Spring Retainers - Aluminium1 x Baja Diff bush - B0802 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Carburetor Set WT6681 x Futaba type sliding charing switch1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Baja Bush Set - Red1 x Baja Diff o-rings - bag101 x 8x Shock Standoffs - Standard Shocks1 x I-RC Flywheel Puller tool1 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x IRC Red UHD rear big bore springs - Losi 5T1 x 1x Losi Muggy Diff Cup - Silver1 x 2x Aluminium Buggy Shock tower - NON X Savage Black2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x Rear Big Bore Shocks - Losi 5ive Black1 x Clutch Shoe Holder Mount1 x 2x 3mm Top Mount Brackets1 x 8x CEN Genesis Shock standoffs2 x 6x Screw Shaft M5x3x18mm1 x 2x 15x24x5mm Flanged Ball Bearing Metal Shield2 x 2x Engine Clutch Bearing Metal Shielded (5x10x4mm)1 x Out Drive Cup Pins - Bag 61 x Losi 5ive top shock mounts1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x 5x 2.5x14mm CVD Dowel Pins1 x CVD Drive set Pins 4x20mm B65601 x I-RC Baja Big Bore rear shock Spring - Stock1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x Innovative-RC Hoodie - Size X Large1 x 1x Losi 8ight-T Diff Cup - Black1 x Front Big Bore Shocks - Losi 5ive Silver1 x 10x16x0.5 Steel Shim - Pack 101 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x M5 Hank rivet bush - Bag101 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 1x Losi 8ight-T Diff Cup - Silver1 x Baja Upper Front Arm Brace Upper Red1 x M4x4 Grub/Set Screw1 x Baja Diff gear holders1 x 6x Differential Gaskets - TT1 x Front Big Bore Shocks - Losi 5ive Black2 x Baja Brake Kit - Full Set all Models1 x M4x12 Socket head cap screws - bag 102 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x 3x6x0.3 Steel Shim - Pack 101 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x Innovative-RC T-Shirt - Size XXLarge1 x Baja Upper Front Arm Brace Upper Blue1 x 10x16x0.3 Steel Shim - Pack 101 x Rear Big Bore Shocks - Losi 5ive Silver2 x Innovative-RC Hoodie - Size Large1 x 10x 3.5mm Body Clip - Rpin1 x Front Heavy Duty losi Shock Shaft - 8mm1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x 5x10x0.3 Steel Shim - Pack 101 x Engine / Cylinder Cover 4 Bolt1 x HPI Baja Rear Lower Brace Blue - 874801 x Innovative-RC Hoodie - Size Small1 x Baja Bush Set1 x 1x Losi LST1 & LST2 Diff Cup - Black1 x Engine Clutch bottom spacer 6.5mm - 875711 x Brake pad screws - Stock Tower to IRC pads
Reviews
Innovative-RC HPI Baja under chassis brace V2 - Silver
Innovative-RC HPI Baja under chassis brace V2 - Silver
£15.99

Another must have for any serious bashers, hugely strengthen...