4x Complete Innovative Black Anodized Savage Shocks

$149.76

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 0 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 1x Losi 8ight-T Diff Cup - Black1 x Battery box bracket HPI Firestorm1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Losi 5T 5B Shock Towers Bash - Rear RED3 x Futaba type sliding charing switch1 x Big Bore Shock 2 Hole Piston1 x HPI Baja Screw Kit (all models) - High tensile1 x CY 27cc Piston ring - 35x1mm1 x Losi DBXL Brake Kit1 x Innovative-RC Mug1 x Baja Shock Spring Retainer - LST1 x M4x10 Countersunk Socket head cap screws - bag 101 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x HPI Savage Screw kit (all models) - High tensile3 x Rear Big Bore Shocks - Losi 5ive Red1 x M4x10 Socket head cap screws - bag 101 x 27cc (35mm) Cylinder Head 2 Bolt1 x Shock Bottom End Cap1 x Shock Tower Brace - Silver2 x ProLux Stone Fuel Filter - Grey1 x Mugen Fuel Tank Mounts2 x CY 29cc Piston ring - 36x1mm3 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc2 x CY 4 Bolt Gasket set rebuild kit3 x M3 Nylock nut bag of 202 x IRC Red UHD Front big bore springs2 x 3x Losi Muggy Diff Cup - Black2 x ProLux Light Weight rebuildable fuel filter - large4 x 6x Differential Gaskets2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Big Bore Shock 4 Hole Piston1 x 2x Savage Diff Cup Case1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Baja Upper Front Arm Brace Upper Red2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x M3x35 Socket head cap screws - bag 102 x Clear Anodized Shock Cap1 x Baja Diff o-rings - bag101 x 2x Losi LST1 & LST2 Diff Cup- silver1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x 4 Bolt Cylinder Gasket1 x Innovative-RC Muggy Chassis - Silver1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x Blue Big Bore shock Spring Retainers - Aluminium1 x 3x Losi 8ight-T Diff Cup - Black1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x M3x5 Button Head Socket cap screws - bag 101 x Baja Big Bore Shock O-Ring Kit1 x IRC Hing Pins Rear Bottom V2 - 866351 x Turnbuckle / Tie-Rod relocation bracket1 x M5x5 Grub Set Screw1 x HPI Baja Rear Lower Brace Blue - 874801 x M4x16 Countersunk Socket head cap screws - bag 101 x CVD Drive set Pins 4x20mm B65601 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Losi 5ive Engine mount inserts - #201 x HPI Baja wheel drive pin 4x281 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x 2x Flanged 10x6x3mm1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x 4mm Shock Rod Ends1 x M4x12 Socket head cap screws - bag 101 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x 10x16x1.0 Steel Shim - Pack 101 x G270RC Petrol RC Engine - 2 Stroke1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Battery box bracket HPI Rush box1 x Shock Cap O-Ring Spacers3 x M3 Spring Washer Zinc plated - bag 201 x CY +2mm Stroker Crank set2 x 10x16x0.3 Steel Shim - Pack 101 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x HPI Baja wheel drive pin 5x24- 965041 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm2 x Bearing Puller1 x 3x Thunder Tiger Differential Case MT4 G3 Silver2 x M5 Hank rivet bush - Bag103 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x M4x4 Grub Screws4 x M3 Captive Nuts / T Nuts - Bag102 x Brake pad screws - IRC Center Tower to stock Pads4 x M3x20 Socket Cap Screws - Bag of 102 x Cleon MMX stiffening chassis side panels - Red2 x Dgobone Drive Pin Set 5x24mm4 x M4x30 Socket head cap screws - bag 104 x Front Big Bore Shocks - Losi 5ive Red2 x Innovative-RC Dual Brake Kit2 x TurtleRacing Rear shock mounts2 x M4 Spring Washer Zinc plated - bag 202 x M5 washers - Zinc plated bag 201 x 1x Savage Diff Cup Case1 x Losi 5ive Engine mount inserts - #181 x Savage Big Bore shock Socks - Black2 x Innovative-RC Muggy Chassis - Black1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Holts Brake Cleaner1 x IRC Hing Pins Front Bottom V2 - 866341 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x Innovative-RC Big Bore Shock Socks - Blue1 x UHD 5mm Outdrive Rear HPI Baja 5SC size (2x) - 1049671 x IRC Hing Pins Full Set V2 - 10Pins1 x CY 26cc Piston ring - 34x0.7mm1 x M4x16 Socket head cap screws - bag 101 x 5x10x0.3 Steel Shim - Pack 101 x 4x Savage Steering post bearings - 6x10x3mm1 x M2.5 Nylock Nuts - Bag 101 x Big Bore Shock Body All Colours - Losi Front1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Roll Bar for HPI Savage 3mm2 x CY 2 Bolt Gasket set rebuild kit1 x Losi 5ive Spring Retainers2 x M4 Washer Zinc plated bag 202 x M3 washers - Zinc plated bag 201 x 2x 12x24x6mm Bll Bearing Metal Shield- B0891 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x Front Heavy Duty losi Shock Shaft - 8mm1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M
Reviews
High response clutch set - Red Spring
High response clutch set - Red Spring
$22.45

<p>great quality for price need to keep these in stock</p>...