Standard Race LCG TVP Kit

£55.00

Product may vary slightly from image representation.
  • Model:race-std
Live Stock Check: 0 units
Share This Product

 

The ideal upgrade for any serious racer who is all ways looking for the best possible performance.
Allays trying to save them extra few seconds from a race lap or fed up of getting beaten by that split second now is your chance to save some critical weight and earn back them few vital seconds.

These TVPs are specially design with racing in mind where lightens is a key aspect while also maintaining the utmost critical strength within the design.

These TVPs are standard length and use the standard dog bones on the HPI Savage. Made from 6082-T6 2.5mm thick.
TVPs are full Mid tank ready with pre-drilled holes for fixing of servos and tank, Full mid tank kit (see our midtank kit page)

Weight comparison table :-

TVP

Weight - TVPs

Weight - Complete

2.5mm Innovative-RC Race TVPs

5.5oz (155g)

11oz (317g)

4mm Innovative-RC bash TVPs

9.7oz (275g)

14.5oz (412g)

standard non LCG HPI

5.8oz (165g)

------

5mm LCG HPI TVP (SavageX)

5.4oz (152g)

------

Note: Weight- TVPs= weight of left & right TVP only, Weight complete= weight of TVP,Skid plate,engineplate & screws.
- weights above should be used as a guide line only.

Included Items :-
1x Standard LCG Race TVPs.
1x LCG Engine plate.
1x Standard length skid plate.
1x TVP screw kit - Hardend grade 12.9 socket cap screws.

Detailed specification of parts:-
TVPs :-
These TVPs are lowered on the Engine and Gearbox giving the savage a more stable and lower ride height. These are made from 2.5mm thick 6082-T6 Aluminum.

12mm lowered on Engine & Gearbox.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them also allows for mounting of any standard roll bar.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG Race standard TVPs.
Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Roto Start:-
Please note, Roto unit will work with HPI quick access bulkheads found on savage X with no mods, when using standard hpi bulkheads please note ofna roto unit will need to be used or modding of the bulk head unit. after market bulks eg GPM work fine with out the cross brace and allow stock roto to be used.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
3 x Rear Heavy Duty losi Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbones 121mm3 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x Front Heavy Duty losi Shock Shaft - 8mm1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x CVD inner Drive set Pins 5x22mm1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Big Bore Shock Body All Colours - Losi Front1 x CY Flywheel / Fan Cover1 x IRC Front MID Front big bore springs - Losi 5T1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x Losi DBXL front & rear shock end ball1 x Baja Brake Kit - Full Set all Models1 x Innovative-RC HPI Baja under chassis brace V2 - Silver2 x MT4 Chassi Gaskets - 6x1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x CVD inner Drive set Pins 5x20mm2 x Innovative-RC T-Shirt - Size Medium1 x Baja Shock Top Mounts - Front1 x Innovative-RC Hoodie - Size Large1 x Innovative-RC Hoodie - Size XXX Large1 x CY Clutch case Housing1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x 29cc Piston (36mm)2 x Baja Bush Set - BLUE2 x Carburetor Gasket2 x HPI Baja Rear Lower Brace Blue - 874802 x CVD Pin rebuild kit - B32172 x Losi 5ive Engine mount inserts - #182 x UHD Innovative-RC BAJA dogbones Standard- 1049662 x I-RC Baja Big Bore rear shock Spring - Stock2 x M6 washers - Zinc plated bag 202 x Turnbuckle / Tie-Rod relocation bracket2 x CY 4 Bolt Gasket set rebuild kit2 x Spur Gear Spacer - 866162 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm2 x 26cc piston (34mm)2 x IRC Red UHD Front big bore springs2 x Thunder Tiger Differential Case MT4 G3 - Red2 x Engine Clutch bottom spacer stock - 875712 x IRC ESC Box - MT42 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0302 x 4mm Nylon brake pipe2 x 5x 2.5x14mm CVD Dowel Pins2 x Engine / Cylinder Cover 4 Bolt2 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile2 x 4x Complete Innovative Black Anodized Savage Shocks2 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V22 x UHD Innovative-RC BAJA dogbones Exstended- 1049662 x IRC RX Box Set - MT42 x I-RC Losi Big Bore front shock Spring - 44lb2 x 24mm Wheel Nuts - GRP & MCD Wheels2 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x Flywheel Key2 x HPI BAja Left Side Engine Mount Brace RED - 874892 x IRC Hing Pins Rear Bottom V2 - 866352 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874902 x Carburetor Set WT6682 x Losi 5ive-T 2.0 servo single arm V2.02 x 23mm Heavy Duty wheel hex - Complete Set (4x)2 x CY stock crank set2 x Battery box bracket HPI Rush box2 x Rear Big Bore Shocks - Losi 5ive Blue2 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks2 x Innovative-RC TT MT4 trayless Kit - RED1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite2 x Baja Front lower arm brace Red - 874811 x 10x 3.5mm Body Clip - Rpin1 x Shock Bleed Screw - 4x1 x Baja Front Upper Brace Blue - 874811 x HPI Baja Rear Brace RED 4mm - 874881 x Diff/Bulkhead Housing Screw Set1 x Piston Roller Pin Bearing1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x Shock Cap O-Ring Spacers1 x Rear Big Bore Shocks - Losi 5ive Silver1 x 10x16x0.1 Steel Shim - Pack 101 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x DBXL Top shock cap Bush 5mm1 x IRC Red UHD Front big bore springs - Losi 5T
Reviews
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
£45.00

love these shafts they look and feel so sturdy have had no t...