3x Thunder Tiger Differential Case MT4 G3 Red

£25.00

Product may vary slightly from image representation.
  • Model:TT-PD1897_3
Live Stock Check: 0 units
Share This Product

3x Silver  Aluminium Diff Cup for the Thunder Tiger RC ModelsV2
NOTE
Cross Pin set (3.5mm pins) are required or stock pins need to be chamfered to fit the Alli cups over the stock plastic version, this can be done with a dremel or file , alternative Innovative-RC make diff pins to pre fit these cups - Ask us for more information if needed.
This is due to use closing up the cross pin length to give a better seal face onto the diff cup around the gaskets due to user feedback.


This cup is a direct replacement for the Front, Rear & Center differential over the stock plastic cups.

These cups are made from high grade 6082-T6 aluminium and clear anodized for a hard wearing long life surface. 

Fites Models:
ER-1, EB-4 S3, ST-1 Pro, EB-4 S3 Rall Game, EB-4 S3 Pro racing kit, EB-4 G3 Brushless Bugger & MT4 G3 4wd Monster Truck. May fit other models also in TT range.
 

Each Cup Includes:-
1x Diff Cup case.
1x Diff Gasket.
2x Hardened Gear Pins.
4x Countersunk socket cap Screws.
2x Diff Cup O-Rings

Required Parts:-
DIff Gears , Oil & Bearing.

Please Note,
Each Cup may need shimming different to each gear set and not all shims may be needed from the gear sets. Good idea to check mesh and setup before filling with oil.
Cross Pin set (3.5mm pins) may need chamfer adding to fit the Alli cups over the plastic version, this can be done with a dremel or file , alternative Innovative-RC make diff pins to pre fit these cups - Ask us for more information if needed.

Loctite all screws into the cup so they do not back out.. Blue Loctite recomended.

These cups may also fit other trucks, please contact us if you unsure.
Cup dimensions.
8mm bearing shaft, 25mm Long overall.

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Big Bore Shock Body All Colours - Losi Front1 x 1x Savage Diff Cup Case1 x HPI Baja Shorty Servo Mount Brace1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x IRC Front MID Front big bore springs - Losi 5T1 x CY Flywheel / Fan Cover1 x 10x16x0.1 Steel Shim - Pack 101 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Innovative-RC Hoodie - Size XXXX Large1 x Losi DBXL front & rear shock end ball1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Baja Shock Spring Retainer - LST1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI Baja Front Upper Plate 4mm Blue - 874841 x CVD inner Drive set Pins 5x20mm1 x CY 4 Bolt Gasket set rebuild kit1 x Brake pad screws - M4 Tower to IRC pads1 x Baja Brake Kit - Full Set all Models1 x CY Clutch case Housing1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Baja Bush Set - BLUE1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Carburetor Gasket1 x 29cc Piston (36mm)1 x MT4 Chassi Gaskets - 6x1 x Innovative-RC Hoodie - Size Large1 x Engine Clutch bottom spacer stock - 875711 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x HPI Baja Rear Brace RED 4mm - 874881 x Innovative-RC Hoodie - Size XXX Large1 x HPI Baja Rear Lower Brace Blue - 874801 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Baja Front lower arm brace Red - 874811 x CY Exhaust Gasket1 x Losi 5ive-T 2.0 servo single arm V2.01 x IRC ESC Box - MT41 x CVD Pin rebuild kit - B32171 x M6 washers - Zinc plated bag 201 x Outdrive cup shaft Orings1 x Baja Front Upper Brace Blue - 874811 x Rear Big Bore Shocks - Losi 5ive Blue1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x CY 29cc Piston ring - 36x1mm1 x Diff/Bulkhead Housing Screw Set1 x Losi 5ive Hing Pins A-Arms1 x M4x16 Socket head cap screws - bag 101 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x Shock Cap O-Ring Spacers1 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x CY stock crank set1 x IRC RX Box Set - MT41 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Baja Rear Lower Brace 2 Blue - 874791 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x 4x Complete Innovative Black Anodized Savage Shocks1 x Carburetor Set WT6681 x Front Axel - Thunder Tiger MT4 CVD Universal1 x Blue Big Bore shock Spring Retainers - Aluminium1 x I-RC Baja Big Bore rear shock Spring - Stock1 x 10x 3.5mm Body Clip - Rpin1 x Diff/Bulkhead Housing - Rear Silver B25421 x 4mm Nylon brake pipe1 x Piston Roller Pin Bearing1 x HPI Baja Rear Brace 4mm - 874881 x M3x8 Countersunk cap screws - bag 101 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Rear Big Bore Shocks - Losi 5ive Silver1 x Baja Front Lower Brace Blue - 874781 x Engine / Cylinder Cover1 x 4x8x0.3 Steel Shim - Pack 101 x Losi 5ive top shock mounts1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x CY Replacement Crank Case Gasket1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Losi Titanium Grade 5 King Pins B20741 x losi 5ive diff inserts1 x Clutch Shoe Holder Mount1 x Servo Y Lead JR, Futaba, Hitec etc1 x 10x16x0.5 Steel Shim - Pack 101 x 27cc (35mm) Cylinder Head 2 Bolt1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x CY Pull Start Assembly - Metal grab1 x Front - Antiroll Bar brace1 x Battery box bracket HPI Rush box1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x Spur Gear Spacer RED - 866161 x I-RC Losi Big Bore rear shock Spring - 66lb1 x 1x Losi Muggy Diff Cup - Black1 x Engine Clutch bottom spacer Black - 875711 x 2x Flanged 10x6x3mm1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x Carb & Exhaust screws - 154821 x 4mm flexable brake pipe1 x Crankcase engine Seal set - Nitrile type1 x M4x30 Socket head cap screws - bag 101 x Engine / Cylinder Cover 4 Bolt1 x ProLux Light Weight rebuildable fuel filter - large1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x Front Big Bore Shocks - Losi 5ive Silver1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Rear Big Bore Shocks - Losi 5ive Black1 x Titanium Exhaust Wrap1 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x Crankcase engine Seal set - Viton type1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Ofna 250cc Fuel Tank Mounts1 x LipoBox - 6S1 x Shock Tower Brace - Black1 x CY Pull Start Assembly1 x CY Insulator manifold1 x Diff/Bulkhead Housing - Front Silver1 x LCG TVPs, Exstended 1inch back with 6mm Front1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Innovative-RC Hoodie - Size Small1 x Front Big Bore Shocks - Losi 5ive Blue1 x Baja Diff o-rings - bag101 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x HPI Baja Brake Calliper1 x Left Spacer Black - 875711 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x M3 Captive Nuts / T Nuts - Bag101 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x M4x10 Socket head cap screws - bag 101 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x M3x5 Button Head Socket cap screws - bag 101 x Bearing Puller1 x Shock Bottom End Cap1 x Brake pad screws - IRC Center Tower to stock Pads1 x Rear Chassis Plate 7075-T6 V3 - 874821 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 1x Losi Muggy Diff Cup - Silver1 x 4x Savage Steering post bearings - 6x10x3mm1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x Futaba type sliding charing switch1 x center tower brake cam set1 x Innovative-RC Big Bore Shock Socks - Blue1 x Big Bore Shock 3 Hole Piston1 x Baja Big Bore Shock O-Ring Kit1 x M3 Spring Washer Zinc plated - bag 201 x IRC Red UHD Front big bore springs - Losi 5T1 x Baja Bush Set1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x M3 washers - Zinc plated bag 201 x Crank Case Engine Snap Ring1 x HPI Baja stearing servo adapter mount - Blue1 x M3x12 Countersunk Socket head cap screws - bag 101 x 27cc Piston Rebuild Kit Set (35mm)1 x 1x Losi 8ight-T Diff Cup - Black1 x Savage Big Bore shock Socks - Black1 x M3x10 Countersunk Socket head cap screws - bag 101 x V2 Savage + MCD Heavy Duty Baja Shock Shaft - 8mm1 x M6 Rod Ends & camber ball set1 x CY Engine FlyWheel (Rotor)1 x 3x6x0.3 Steel Shim - Pack 101 x High Response Clutch Spring - Red1 x Savage Rod End 10mm Balls1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x Center Tower throttle supports1 x IRC Red UHD rear big bore springs1 x HPI Baja stearing servo adapter mount - Black1 x Innovative-RC Big Bore Shock Socks - Green1 x HPI BAja Left Side Engine Mount Brace - 874891 x Innovative-RC Muggy radio tray set1 x Piston Snap Ring Set1 x HPI Baja Brake Calliper - Blue Anodized1 x Flux Black Anodized Standard LCG TVP Kit1 x High response clutch set - Red Spring1 x M4x4 Grub Screws1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x 4-40x3/8 Button Head socket Screw - Bag 101 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x IRC Hing Pins Full Set V2 - 10Pins1 x Innovative-RC Big Bore Shock Socks - Black1 x M6 Captive Nuts / T Nuts - Bag101 x M5 Captive Nuts / T Nuts - Bag101 x Shock Tower Brace - Blue1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x Black Adjuster Ring1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x Thunder Tiger MT4 CVD Universal rebuild1 x 3x Losi Muggy Diff Cup - Silver1 x Big Bore Shock 2 Hole Piston1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x TurtleRacing Rear shock mounts1 x 27cc (35mm) Cylinder Head 4 Bolt1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x M4x12 Countersunk Socket head cap screws - bag 101 x IRC Hing Pin screw & washer set1 x M6 Hank rivet bush - Bag101 x M4x10 Button Head Socket cap screws - bag 101 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x HPI MT2 Diff Cup Case Silver - 1x1 x Maxima Air Filter Cleaner - Spray1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x M8 Rod Ends for Big Bore Shocks1 x MCD & Savage Shock Spring - 2.5mm1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Losi 5ive Front and rear shock end ball1 x M4x10 Countersunk Socket head cap screws - bag 10
Reviews
Center Tower full kit
Center Tower full kit
£149.99

Fantastic Product - lighter and stronger than you think. Bea...