Innovative-RC Pro Mid Tank mod Kit

£30.00

Product may vary slightly from image representation.
  • Model:071102-4
Available Options
Live Stock Check: 0 units
Share This Product

This Mid tank mod kis is for mounting of the HPI Hellfire 150cc, Muggen 150cc & Ofna 250cc fuel tanks. Please note that this kit only works with the Innovative-RC TVPs (Bash or race tvps).

Battery Box bracket
A options of battery box brackets is available for use with the kit, for mounting the Rush Evo or the firestorm box to the front (or rear) Shock towers (see below for option to include with this kit) All bracket types are CNC machined from 6082-T6 aluminium and included all fixing screws.

Front Stearing & Tank Support Bracket
This Bracket is used to hold the two stearing posts in postion and also to secure the fuel tank plate in place at the front. Made from 6082-T6 aluminium for high strength including all fixing hardware.

Rear Fuel tank plate support bracket
This Bracket is used to secure the fuel tank plate in place at the rear of the fuel tank plate. Made from 6082-T6 aluminium for high strength.

Rear Servo Mounts
Rear Servo Mount brackets for mounting the trottel servo to the rear of Innovative-RC TVPs. Made from high strength Acetal for low weight and high strength including all needed mounting screws.

Stearing / Reciver Box
Innovative-RC Stearing & Reciver specially designed box for the midtank mod for fixing to Innovative-RC TVPs.Made from high strength Acetal for low weight and high strength with a clear lid to the box. This box is used to mount the savage stearing servo in possion and reciver in location .
Please note the box size is as follows for the RX space
59mm Long
24mm Wide
27.3mm High

I-RC stearing Linkages
This linkage is for use with the Innovative-RC Midtank mod, the threaded rod contains a left hand and a right hand thread for quick easy adjustments with no need to take the linkage apart. The threaded rod is made from high grade high strength stainless steel for rust protection and long life.

Fuel Tank posts
A selection of different fuel tank posts are available for use with the Mid tank mod. see below for option of which post to have shipped with this kit.

Brake & throttle linkage rods
Only available with the pro kit version we include brake & throttle linkage rods that are pre-cut to length and pre Z Bent for connecting to the throttle bell crank and brake leaver (ofna slider kit will be needed).

Please note that the CEN and Mugen fuel tank combo only works with front extended TVPs, +6mm extended TVP set or the 1inch and 6mm TVP set.

Items Included:-
1x Battery box bracket HPI Firestorm or HPI Rush Evo
1x Front Stearing & Tank Support Bracket
1x Rear Fuel tank plate support bracket
2x Fuel tank mounts HPI Hellfire, Mugen or ofna fuel tanks (see options below)
1x set rear Servo Mounts
1x I-RC Stearing / Reciver Box
1x I-RC stearing Linkage
1x Set of Brake & throttle linkages
1x Set of fixing screws for mounting parts, Grade 12.9 For caphead screws, 10.9 countersunk and buttenhead screws.

Items Required:-
Allen Keys
Servo Exstention cables (300mm, 50mm)
Firestorm or rush evo battery box
ofna slider linkage kit (or similar product)
Fuel tank (ofna 260cc, hellfire 150cc or mugen 150cc)

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x Red Big Bore shock Spring Retainers - Aluminium1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Losi 5T 5B Shock Towers V2 - Rear1 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x 4x Complete Innovative Black Anodized Savage Shocks1 x Torx Screw Kit Elcon etc - High tensile Steel1 x Savage Shock Bottom End Cap1 x differential cross pins TT MT4 - 6x1 x HPI Baja wheel drive pin 5x24- 965041 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Big Bore Shock 5 Hole Piston1 x Losi 5ive Engine mount inserts - #191 x Baja Bush Set1 x 27cc Piston Rebuild Kit Set (35mm)1 x Innovative-RC TT MT4 trayless Kit - Blue1 x center tower brake cam set1 x Clear Anodized Shock Cap1 x HPI Savage Screw kit (all models) - High tensile1 x CY 23cc Piston Ring - 32x1mm1 x M6 Rod Ends - Right hand thread1 x HPI Baja Brake Calliper - Blue Anodized1 x Flux Black Anodized Standard LCG TVP Kit1 x High response clutch set - Red Spring1 x Thunder Tiger MT4 CVD Universal rebuild1 x M5 Captive Nuts / T Nuts - Bag101 x IRC Hing Pins Full Set V2 - 10Pins1 x M3x20 Socket Cap Screws - Bag of 101 x M5 Hank rivet bush - Bag101 x TurtleRacing Rear shock mounts1 x Shock Spring Retainer - LST Springs1 x Innovative-RC HPI BAJA 5B & 5T Spur Gear - 54T1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x M3x25mm Socket Cap Screw - BAG 101 x Losi Steel King Pins B20741 x Shock Hardware - screws, nuts etc1 x HPI Baja Rear Lower Brace - 874801 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x SuperSwitchHD 2 Pac1 x Battery box bracket HPI Firestorm1 x Black Anodized Roll Bar1 x CRT Tower Set - Silver1 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x Rear Shock end Ball - 11mm1 x M4x4 Grub/Set Screw1 x Skid plate for Standard LCG TVPs1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x HPI Baja Right Side Engine Mount Brace RED - 874901 x Losi 5ive Spring Adjuster Ring1 x HPI Baja wheel drive pin - 965041 x CVD Drive set Pins 4x20mm B65601 x Big Bore Shock 3 Hole Piston DUAL Rate1 x Black Shock Spring Adjuster Ring1 x CY 27cc Piston ring - 35x1mm1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x CY Flywheel / Fan Cover1 x Baja Front Upper Brace Blue - 874811 x Thunder Tiger Front/Rear outdrive1 x Diff/Bulkhead Housing Screw Set1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x 10x 3.5mm Body Clip - Rpin1 x Piston Roller Pin Bearing1 x 4x8x0.3 Steel Shim - Pack 101 x Shock Tower Brace - Silver1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Big Bore Shock 3 Hole Piston1 x M4 Washer Zinc plated bag 201 x 4mm Shock Rod Ends1 x CY Engine FlyWheel (Rotor)1 x Black Adjuster Ring1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x IRC Hing Pin screw & washer set1 x Shock Tower Brace - Blue1 x IRC Shock Spring Retainer1 x 4x Complete Innovative Silver Anodized Savage Shocks1 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x Innovative-RC Big Bore Shock Socks - Purple1 x O-Ring Diff Cups - 5.5x2mm1 x M3 washers - Zinc plated bag 201 x M3x10 Countersunk Socket head cap screws - bag 101 x Crank Case Engine Snap Ring1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x IRC Front MID Front big bore springs - Losi 5T1 x HPI Baja Screw Kit (all models) - High tensile1 x 4-40x3/8 Button Head socket Screw - Bag 101 x M4x4 Grub Screws1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x 3x Losi Muggy Diff Cup - Silver1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x Losi 5ive Spring Retainers1 x IRC Hing Pins Front Bottom V2 - 866341 x Thunder Tiger Differential Case MT4 G3 Black1 x Thunder Tiger centre diff out drive1 x Baja Shock spring retainer - Heavy Duty Springs
Reviews
Innovative-RC HPI Baja 5B 5T enclosed chassis
Innovative-RC HPI Baja 5B 5T enclosed chassis
£120.00

I bought a silver one recently off Rob having seen them on v...