4x Complete Innovative Black Anodized Savage Shocks

$160.47

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x Shock Bush short1 x Clutch Shoe Holder Mount1 x CY Replacement Crank Case Gasket1 x HPI BAja Left Side Engine Mount Brace RED - 874891 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Spur Gear Spacer RED - 866161 x 1x Losi Muggy Diff Cup - Black1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x M4x30 Socket head cap screws - bag 101 x Front Heavy Duty losi Shock Shaft - 8mm1 x Carb & Exhaust screws - 154821 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x 10x16x0.5 Steel Shim - Pack 101 x CY 2 Bolt Gasket set rebuild kit1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x Roll Bar for HPI Savage 3mm1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 27cc (35mm) Cylinder Head 2 Bolt1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Titanium Exhaust Wrap1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Left Spacer - 875711 x Baja Front Upper Brace - 874811 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x ProLux Light Weight rebuildable fuel filter - large1 x Flywheel Nut1 x Brake plate spacer RED - 874971 x M6 Rod Ends & camber + steering ball set1 x LipoBox - 4S1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x CY Pull Start Assembly - Metal grab1 x Crankcase engine Seal set - Viton type1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x 50x 6mm Body Clip Bulk - Rpin1 x Front Big Bore Shocks - Losi 5ive Silver1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Baja Bush Set - Black1 x Piston Pin 27 & 29cc - 8x281 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x LipoBox - 6S1 x 4mm flexable brake pipe1 x M5x5 Grub Set Screw1 x Diff/Bulkhead Housing - Front Silver1 x Ceter tower diff mounts Front & Rear1 x Left Spacer RED- 875711 x Rear Big Bore Shocks - Losi 5ive Black1 x Center Tower top plate for truck V2.01 x Ofna 250cc Fuel Tank Mounts1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x SuperSwitchHD - 1x1 x Front Big Bore Shocks - Losi 5ive Black1 x 6x Differential Gaskets1 x M3x3 Grub Set screw1 x Losi 5T 5B Shock Towers - Front1 x Right Clutch Spacer - 875551 x 3x Losi Muggy Diff Cup - Black1 x Pull Start Thumb Screws1 x M3x16 Countersunk Socket head cap screws - bag 101 x Short Big Bore Rod Ends - M81 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Losi 5ive Engine mount inserts - #191 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Shock Tower Brace - Silver1 x Innovative-RC Foam Filter Oil - 100ml1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x IRC Hing Pins Rear Top V2 - 866351 x CY Kill Switch Inc rubber cover1 x M6 Rod Ends - Left hand thread1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x innovative-rc Losi 5ive Diff Cup / Case1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Torx Screw Kit Elcon etc - High tensile Steel1 x CY 23cc Piston Ring - 32x1mm1 x Baja Diff bush - B0801 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x 4x Complete Innovative Red Anodized Savage Shocks1 x Crank Case Engine Snap Ring1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x 3x Losi 8ight-T Diff Cup - Silver1 x M4 Nylock nut bag of 201 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x IRC Black HD Rear Big Bore Springs1 x High Response Clutch Spring - Red1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x IRC BLACK MID rear big bore springs - Losi 5T1 x Innovative-RC Muggy Chassis - Silver1 x M3 Spring Washer Zinc plated - bag 201 x I-RC Flywheel Puller tool1 x Front Big Bore Shocks - Losi 5ive Blue1 x M6 Rod Ends & Steering ball set1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x Futaba type sliding charing switch1 x Innovative-RC Muggy radio tray set - Black1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x differential cross pins TT MT4 - 6x1 x M3x10 Button Head Socket cap screws - bag 101 x 2x Nitro Silicone Switch Cover - Futaba etc1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x center tower brake cam set1 x Baja Rear lower arm brace Red - 874801 x Shock Tower Brace - Black1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x HPI Baja Brake Calliper1 x Savage Shock Bottom End Cap1 x M3x20 Socket Cap Screws - Bag of 101 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x M3x5 Button Head Socket cap screws - bag 101 x Losi 5ive drive cup Clips1 x Baja Big Bore Shock O-Ring Kit1 x Air Filter Gasket1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x DBXL Top shock cap Bush 5mm1 x Big Bore Shock 3 Hole Piston1 x 27cc Piston Rebuild Kit Set (35mm)1 x Center Tower top plate for truck V1.01 x Savage Big Bore shock Socks - Black1 x O-Ring Diff Cups - 5.5x2mm1 x M6 Rod Ends & camber ball set1 x M3 washers - Zinc plated bag 201 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 2x Losi LST1 & LST2 Diff Cup- silver1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x Piston Pin Washer Set1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x Piston Snap Ring Set1 x M3 Captive Nuts / T Nuts - Bag101 x IRC Red UHD Front big bore springs - Losi 5T1 x Innovative-RC Big Bore Shock Socks - Blue1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Innovative-RC TT MT4 trayless Kit - Blue1 x HPI Baja stearing servo adapter mount - Blue1 x MCD Fork Ends set 4 - 8mm1 x M4x12 Socket head cap screws - bag 101 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x M4x10 Countersunk Socket head cap screws - bag 101 x M2 Captive Nuts / T Nuts - Bag 101 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Shock O-Ring Kit1 x Baja Bush Set1 x HPI Savage Screw kit (all models) - High tensile1 x 1x Losi 8ight-T Diff Cup - Black1 x 1x Losi Muggy Diff Cup - Silver1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x CY Engine FlyWheel (Rotor)
Reviews
Black Anodized Roll Bar
Black Anodized Roll Bar
$17.37

Super strong, yet suprisingly light at the same time... Fitt...