Innovative-RC MT4 Chassis

$81.12

Product may vary slightly from image representation.
  • Model:MT4-chassis
Available Options
Live Stock Check: 0 units
Share This Product

 


Innovative-RC Thunder Tiger MT4 Chassis is made from 4mm 6082-T6 for the ultimate high strength chassis resulting in reduced chassis flex.

We have added chamfered droop areas to this chassis just like our Muggy chassis for vastly improved set-up for droop down travel adjustment allowing for even more performance enhancements for when racing on the track giving to a much improved ground handling over jumps and in tight corners allowing for more grip on the track for improved lap times!(adjustment of droop screws may be needed to retain a stock like setup)

Also added are custom mounting locations for  RX Box, Lipo battery tray, ESU Box allowing for a trayless setup to be run on the chassis (items available separate from innovative-RC).

Also included are 6x chassis gaskets for mounting under the front & rear diff/bulkheads to stop dirty entering into these areas. aiding in a longer gear and maintenance free life.

The chassis is available in Silver/Clear anodize , Black, Blue & Red anodized brushed finished surface.

Please pick colour to the side before ordering.
Please note this is a pre-order only listing, we hope to have this item in stock and shipping on or before 14/11/14. any questions please contact us,

Included Items:-
1x I-RC MT4 Chassis brushed anodized finished surface.
6x Chassis Diff Gaskets.
1x Set of stickers.

Items needed:
NONE

Optional Items:
Innovative-RC Battery Tray
Innovative-RC  RX Box
Innovative-RC  ESU Tray

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x Piston Pin 23 & 26cc - 8x25mm2 x High Response Clutch Spring - Red2 x Engine / Cylinder Cover 4 Bolt2 x insulator gasket2 x CY Ignition Coil assembly2 x Piston Snap Ring Set2 x Piston Pin Washer Set1 x 29cc Piston Rebuild Kit Set (36mm)2 x Engine / Cylinder Cover2 x CY Insulator manifold2 x CY Kill Switch Inc rubber cover1 x CY 2 Bolt Gasket set rebuild kit1 x Piston Pin 27 & 29cc - 8x282 x High response clutch set - Yellow Spring1 x CY 27cc Piston ring - 35x1mm1 x M5 Captive Nuts / T Nuts - Bag102 x 26cc piston (34mm)1 x 26cc piston (34mm) - For 0.7mm Ring1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x LipoBox - 4S1 x 26cc piston (34mm) 4Bolt1 x CY Replacement Crank Case Gasket1 x 26cc Piston Rebuild Kit Set (34mm)1 x 27cc piston (35mm)1 x 27cc (35mm) Cylinder Head 4 Bolt1 x CY Exhaust Gasket1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x CY Pull Start Assembly1 x 23cc piston (32mm)2 x 2 Bolt heavy duty Cylinder Gasket1 x O-Ring Diff Cups - 5.5x2mm1 x Piston Roller Pin Bearing1 x F270 4Bolt With Filter, Pullstart & Carb1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set2 x CY Flywheel / Fan Cover1 x CY 29cc Piston ring - 36x1mm1 x CY stock crank set1 x 27cc Piston Rebuild Kit Set (35mm)1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x F230 4Bolt With Filter, Pullstart & Carb1 x Flywheel Nut1 x CY Clutch case Housing1 x 27cc (35mm) Cylinder Head 2 Bolt1 x Engine / Cylinder Cover 4 Bolt1 x CY Engine FlyWheel (Rotor)1 x 23cc Piston Rebuild Kit Set (32mm)1 x 23cc (32mm) Cylinder Head - 2 Bolt1 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x IRC ESC Box - MT41 x Flywheel Key1 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt1 x M6 Hank rivet bush - Bag101 x 3x6x0.3 Steel Shim - Pack 101 x HPI Baja Rear Brace 4mm - 874881 x 50x 3.5mm Body Clip Bulk - Rpin1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x 10x16x1.0 Steel Shim - Pack 101 x Holts Brake Cleaner1 x Blue Anodized Shock Cap1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long2 x Dgobone Drive Pin Set 5x24mm1 x 10x 6mm Body Clip - Rpin1 x M8 Rod Ends for Big Bore Shocks1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x HPI Baja Front Upper Plate 4mm - 874841 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Innovative-RC TT MT4 trayless Kit - RED1 x HPI BAja Left Side Engine Mount Brace - 874891 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x M5 Spring Washer Zinc plated - bag 201 x 10x16x0.5 Steel Shim - Pack 101 x 4x8x0.3 Steel Shim - Pack 101 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x M4x4 Grub/Set Screw1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x Titanium Exhaust Wrap
Reviews
Center Tower full kit
Center Tower full kit
$187.18

Fantastic Product - lighter and stronger than you think. Bea...