Innovative-RC Hong Nor CRT Chassis - Silver

73.21€

Product may vary slightly from image representation.
  • Model:CRT-Chassis
Live Stock Check: 0 units
Share This Product

Innovative-RC Hong Nor CRT Chassis is made from 3mm 7075-T6 for the ultimate lightweight & high strength chassis. This chassis weighs in at only 330grams for a weight saving of over 20% in weight!!.

Chassis has chamfered droop areas for vastly improved set-up for droop down travel adjustment allowing for even more performance enhancements while the chassis has also been extended by 6mm giving to a much improved ground handling not only over jumps also in corners allowing the driving more grip on the track for improved lap times! to accommodate the extra length we include a extended drive cup free that is made from high tensile steel that is hardened and tempered for a very long wearing life.

The flywheel chamfer has also been improved and enlarged for longer life of start box's and easy access to the flywheel.

If the above was not enough the chassis also comes complete with chassis fixing countersunk screws of grade 10.9 (150,800PSI !!!) to secure every part down to the chassis. we also include 2x chassis gaskets for mounting under the diff housing to stop dirt and grime entering into the diff areas to allow for longer lasting diff gears.

The chassis is available in black or clear anodized finish for a hard wearing surface finish.

Included Items:-
1x I-RC CRT Chassis.
1x Extended Drive Cup.
1x set of chassis fixing screws.
2x Chassis Diff Gaskets.
1x Set of stickers.

 

 

7075-T6 7075 6061-T6
Tensile Strength 572Mpa!!! 228Mpa 310Mpa

I-RC Hong Nor Pro Fiorini BCE CRT
Weight of Chassis 330g!! 410g 397g 384
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...

You might also like...

Manufacturers
Share This Product
1 x M3x35 Socket head cap screws - bag 101 x IRC Hing Pins Full Set V2 - 10Pins1 x 3x Losi Muggy Diff Cup - Silver1 x M3x20 Socket Cap Screws - Bag of 101 x Nitro Engine Piston Stopper1 x TurtleRacing Rear shock mounts1 x M8 Rod Ends for Big Bore Shocks1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x M3x16 Socket head cap screws - bag 101 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 2x Savage Diff Cup Case1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x IRC Red UHD rear big bore springs - Losi 5T1 x M3x12 Socket head cap screws - bag 101 x Big Bore Shock Blank Piston1 x Blue Anodized Shock Cap1 x Baja Upper Front Arm Brace Upper Blue1 x M4x30 Countersunk Socket head cap screws - bag 101 x M3x25mm Socket Cap Screw - BAG 101 x Black Big Bore shock Spring Retainers - Aluminium1 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x IRC Shock Spring Retainer1 x CVD Drive set Pins 4x20mm B65601 x Baja Bush Set - BLUE1 x Big Bore Shock Body All Colours - Losi Front1 x HPI Baja stearing servo adapter mount - Blue1 x M3 Captive Nuts / T Nuts - Bag101 x CY Engine FlyWheel (Rotor)1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x M4 Washer Zinc plated bag 201 x M4x12 Socket head cap screws - bag 101 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x Savage Rod End 10mm Balls1 x IRC Red UHD rear big bore springs1 x HPI Baja Brake Calliper - Blue Anodized1 x Engine Clutch bottom spacer 6.5mm - 875711 x 4-40x3/8 Button Head socket Screw - Bag 10
Reviews
Flux Standard LCG TVP Kit
Flux Standard LCG TVP Kit
53.13€

had these a while now and have done some proper hard bashing...