Black Anodized Standard LCG TVP Kit

$84.25

Product may vary slightly from image representation.
  • Model:std-blk
Live Stock Check: 0 units
Share This Product

 

This package contains everything needed to fit the HPI Savage with black anodized LCG TVPs
Included in this package deal is one set of standard length LCG TVPs for the HPI savage, LCG Engine plate and Skid plate. included is also a full set of hardened socket cap head screws for fitting all the savage parts to the

Included :-
1x Set of Standard LCG TVPs. Weight of TVPs = 275grams (9.7oz) (individual = 140grams (4.9oz))
1x Engine plate for standard LCG TVPs. weight of 62.5grams (2.2oz)
1x Skid plate package. weight of 75 grams (2.6oz)
1x TVP Screw set kit - Contains M3,M4,M3 Countersunk hardened socket cap screws.

Skid plate package contains :-
2x Cross braces.
1x Skid plate.
4x M3x12 Countersunk socket cap screws.
4x M3x12 Socket cap screws.

Part Specs are as follows :-

TVPs:-
These TVPs lowered on the Engine and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminum giving a added 60% overall of strength to the savage.

TVP Specs are:
12mm lowered on Engine & Gearbox.
6mm overall extension (3mm front and back) due to drop in angel of dog bones. but still uses stock dog bones front and back.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them. Also two taped M3 screw holes for roll bar screws for that extra needed solid fixing of roll bar when bashing.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.

Engine plate Specs:
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG standard TVPs.

Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Included:-
1x Skid Plate.
2x Cross braces.
4x M3x12 Countersunk socket cap Screws.
4x M3x13 Socket Cap screws.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x CY Clutch case Housing1 x 29cc Piston (36mm)1 x Losi 5ive Engine mount inserts - #181 x Baja Bush Set - BLUE1 x Thunder Tiger Front/Rear outdrive1 x Carburetor Gasket1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Engine / Cylinder Cover 4 Bolt1 x I-RC Baja Big Bore rear shock Spring - Stock1 x CVD Pin rebuild kit - B32171 x HPI Baja Rear Lower Brace Blue - 874801 x 29cc Piston Rebuild Kit Set (36mm)1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x Front Big Bore Shocks - Losi 5ive Blue1 x Left Spacer Black - 875711 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x Losi 5T 5B Shock Towers - Front1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x CY Kill Switch Inc rubber cover1 x I-RC Flywheel Puller tool1 x Center Tower throttle supports1 x M3 Nylock nut bag of 201 x IRC Red UHD Front big bore springs - Losi 5T1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Savage Rod End 10mm Balls1 x M3x10 Countersunk Socket head cap screws - bag 101 x Big Bore Shock 3 Hole Piston1 x Losi 5ive Engine mount inserts - #191 x 4mm Shock Rod Ends1 x High response clutch set - Red Spring1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x M6 Hank rivet bush - Bag101 x Black Anodized Roll Bar1 x Maxima Air Filter Cleaner - Spray1 x IRC Red UHD rear big bore springs - Losi 5T1 x 2x Flanged Rubber Shield 10x6x3mm1 x Baja Rear Lower Brace 2 - 874791 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x M2.5 Nylock Nuts - Bag 101 x Rear Fuel tank plate support bracket1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x Skid plate for Standard LCG TVPs1 x Shock Tower Brace - Blue1 x HPI Baja Rear Lower Brace - 874801 x I-RC stearing Linkages1 x IRC Shock Spring Retainer1 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x Losi Steel King Pins B20741 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Rear Shock end Ball - 11mm1 x 10x 6mm Body Clip - Rpin1 x M3x8 Socket head cap screws - bag 101 x Baja Diff gear holders1 x 90Deg PushFit 4mm tube M51 x 2x Flanged Bearing - 10x6x4 3speed1 x 1x Losi LST1 & LST2 Diff Cup - Black
Reviews
V3 Rear Big Bore Shocks - Baja 5B 5T
V3 Rear Big Bore Shocks - Baja 5B 5T
$146.76

Love the V3 Big Bore Shocks(Nice Finish) very much and safe ...