4x Complete Innovative Black Anodized Savage Shocks

£120.00

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 0 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x ProLux Light Weight rebuildable fuel filter - large2 x Innovative-RC Hoodie - Size XXXX Large4 x M3 Spring Washer Zinc plated - bag 205 x Heavy Duty On/Off Switch & charging jack Futaba Type4 x M3 Captive Nuts / T Nuts - Bag101 x M3x10 Button Head Socket cap screws - bag 104 x FILTERED FUEL PICK UP CLUNK Brass2 x Shock Cap O-Ring Spacers4 x M2.5x10mm Socket Head Cap Screw - Bag of 104 x Baja Front Upper Brace Black Anodized 7075-T6 - 874813 x Baja Upper Front Arm Brace Upper Blue2 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x CY stock crank set1 x Baja Front lower arm brace Red - 874813 x Losi Titanium Grade 5 King Pins B20741 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm3 x Futaba type sliding charing switch2 x Baja Upper Front Arm Brace Black Anodized 7075-T62 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x M5 Hank rivet bush - Bag101 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)4 x M3x10 Socket head cap screws - bag 101 x Crankcase engine Seal set - Viton type1 x Roll Bar for HPI Savage 3mm1 x High response clutch set - Yellow Spring1 x CY 26cc Piston ring - 34x0.7mm3 x M3x16 Socket head cap screws - bag 102 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long3 x Innovative-RC Hoodie - Size Small1 x Losi 5ive Hing Pins A-Arms3 x CY Kill Switch Inc rubber cover1 x M3x3 Grub Set screw1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x Bearing Puller1 x 4mm Standard LCG TVPs Package - 4mm1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 83 x M2 Captive Nuts / T Nuts - Bag 101 x 27cc (35mm) Cylinder Head 4 Bolt3 x M3x12 Countersunk Socket head cap screws - bag 101 x Skid Plate for Exstended 6mm TVPs1 x High response clutch set - Red Spring1 x Shock Bleed Screw - 4x1 x SuperSwitchHD - 1x3 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x M3 Nylock nut bag of 204 x M2.5x12 Stainles Socket Cap Screw - Bag 102 x Maxima Air Filter Cleaner - Spray1 x Carburetor Gasket1 x Shock Bush short2 x CY Insulator manifold2 x M3x16 Countersunk Socket head cap screws - bag 103 x M2.5 Nylock Nuts - Bag 103 x FILTERED FUEL PICK UP CLUNK2 x 4-40x1/2 Socket Head Cap Screw - Bag 102 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty2 x Losi 5ive drive cup Clips1 x Innovative-RC T-Shirt - Size XLarge1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x 4-40x3/8 Button Head socket Screw - Bag 101 x Baja Shock Top Mounts - Rear1 x 27cc Piston Rebuild Kit Set (35mm)1 x Nitro Engine Piston Stopper1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x Innovative-RC Mug1 x Clutch Spring - Yellow1 x F230 4Bolt With Filter, Pullstart & Carb1 x M6 Captive Nuts / T Nuts - Bag101 x LCG TVPs, Exstended 1inch back with 6mm Front1 x F270 4Bolt With Filter, Pullstart & Carb1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Black Big Bore shock Spring Retainers - Aluminium1 x Black Slotted Big Bore shock Spring Retainers - Aluminium
Reviews
Innovative-RC HPI Baja under chassis brace V2 - Blue
Innovative-RC HPI Baja under chassis brace V2 - Blue
£15.99

I received this along with my Innovative-RC chassis and stra...