4mm Standard LCG TVPs Package - 4mm

£50.00

Product may vary slightly from image representation.
  • Model:std
Live Stock Check: 0 units
Share This Product

 

This package contains everything needed to fit the HPI Savage with LCG TVPs
Included in this package deal is one set of standard length LCG TVPs for the HPI savage, LCG Engine plate and Skid plate. included is also a full set of hardened socket cap head screws for fitting all the savage parts to the

Included :-
1x Set of Standard LCG TVPs. Weight of TVPs = 275grams (9.7oz) (individual = 140grams (4.9oz))
1x Engine plate for standard LCG TVPs. weight of 62.5grams (2.2oz)
1x Skid plate package. weight of 75 grams (2.6oz)
1x TVP Screw set kit - Contains M3,M4,M3 Countersunk hardened socket cap screws.

Skid plate package contains :-
2x Cross braces.
1x Skid plate.
4x M3x12 Countersunk socket cap screws.
4x M3x12 Socket cap screws.

Part Specs are as follows :-

TVPs:-
These TVPs lowered on the Engine and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminum giving a added 60% overall of strength to the savage.

TVP Specs are:
12mm lowered on Engine & Gearbox.
6mm overall extension (3mm front and back) due to drop in angel of dog bones. but still uses stock dog bones front and back.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them. Also two taped M3 screw holes for roll bar screws for that extra needed solid fixing of roll bar when bashing.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.

Engine plate Specs:
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG standard TVPs.

Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Included:-
1x Skid Plate.
2x Cross braces.
4x M3x12 Countersunk socket cap Screws.
4x M3x13 Socket Cap screws.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x M3x5 Button Head Socket cap screws - bag 102 x Innovative-RC Muggy Chassis - Silver2 x M4x16 Socket head cap screws - bag 102 x M4 Spring Washer Zinc plated - bag 202 x 10x 3.5mm Body Clip - Rpin2 x Crank Case Sealed bearing 12x28x8- 60012RS4 x 6x12x0.3 Steel Shim - Pack 102 x Carb & Exhaust screws - 154822 x HPI Baja wheel drive pin 5x24- 965042 x M3x8 Countersunk cap screws - bag 102 x 10x 6mm Body Clip - Rpin1 x M3x8 Socket head cap screws - bag 101 x 3x6x0.3 Steel Shim - Pack 101 x 27cc Piston Rebuild Kit Set (35mm)1 x 2x 9x24x7mm Ball Bearing Rubber Shield1 x 8x Shock Standoffs - Buggy Shocks2 x 4-40x1/2 Socket Head Cap Screw - Bag 102 x M4x12 Countersunk Socket head cap screws - bag 102 x F270 4Bolt With Filter, Pullstart & Carb2 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite2 x Center Tower throttle supports2 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long2 x Crankcase engine Seal set - Viton type2 x M4 Captive Nuts / T Nuts - Bag102 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc2 x M3x25mm Socket Cap Screw - BAG 102 x Engine Piston Stopper2 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws2 x F230 4Bolt With Filter, Pullstart & Carb2 x M4x10 Button Head Socket cap screws - bag 101 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x 50x 3.5mm Body Clip Bulk - Rpin1 x M4x30 Socket head cap screws - bag 101 x Thunder Tiger Differential Case MT4 G3 - Red1 x 10x16x0.3 Steel Shim - Pack 101 x 4-40x3/8 Button Head socket Screw - Bag 101 x 2x Losi LST1 & LST2 Diff Cup- silver2 x 27cc (35mm) Cylinder Head 2 Bolt1 x M6 Hank rivet bush - Bag101 x 6x Differential Gaskets1 x NGK Spark Plug CMR7H1 x 2x 3mm Top Mount Brackets1 x 5x10x0.3 Steel Shim - Pack 101 x M4x10 Socket head cap screws - bag 101 x 2x Top shock support brackets - Savage x1 x HPI MT2 Diff Cup Case Silver - 1x1 x M4 Washer Zinc plated bag 201 x M3x20 Socket Cap Screws - Bag of 101 x 4mm Nylon brake pipe1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK
Reviews
Innovative-RC HPI Baja 5B 5T enclosed chassis
Innovative-RC HPI Baja 5B 5T enclosed chassis
£120.00

Bought this amazing chassis, extremely please with it as it ...