Innovative-RC HPI Baja 5B 5T enclosed chassis - BLUE

141.69€

Product may vary slightly from image representation.
  • Model:87477-BL
Available Options
Live Stock Check: 0 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Pre installed Reivets for under chassis brace

 

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x CVD inner Drive set Pins 5x22mm1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Flywheel Key1 x Baja Front Upper Brace Blue - 874811 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x Losi 5ive Engine mount inserts - #201 x M4 Captive Nuts / T Nuts - Bag101 x Baja Front Lower Brace Blue - 874781 x Big Bore Shock 5 Hole Piston DUAL Rate1 x 4x Complete Innovative Red Anodized Savage Shocks1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x NGK Spark Plug CMR7H1 x HPI BAja Left Side Engine Mount Brace - 874891 x Front Big Bore Shocks - Losi 5ive Blue1 x M4x10 Button Head Socket cap screws - bag 101 x Big Bore Shock 2 Hole Piston1 x M6 Captive Nuts / T Nuts - Bag101 x M3x25mm Socket Cap Screw - BAG 101 x Black Adjuster Ring1 x 4x Hong nor CRT Shock standoffs1 x O-Ring Diff Cups - 5.5x2mm1 x Red Big Bore shock Spring Retainers - Aluminium1 x Innovative-RC Hoodie - Size XXXX Large1 x 1x Savage Diff Cup Case1 x Engine / Cylinder Cover 4 Bolt1 x Baja Brake Kit - Full Set all Models1 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x 4x Complete Innovative Black Anodized Savage Shocks1 x Brake pad screws - M4 Tower to IRC pads1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x 29cc Piston (36mm)1 x Turnbuckle / Tie-Rod relocation bracket1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Losi 5ive Engine mount inserts - #181 x Pull Start Thumb Screws1 x Steering Crank shaft1 x CVD inner Drive set Pins 5x20mm1 x CVD Pin rebuild kit - B32171 x IRC Red UHD Front big bore springs1 x I-RC Losi Big Bore front shock Spring - 44lb1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Carburetor Set WT6681 x CY 4 Bolt Gasket set rebuild kit1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x 5x 2.5x14mm CVD Dowel Pins1 x 10x 3.5mm Body Clip - Rpin1 x Crankcase engine Seal set - Nitrile type1 x Outdrive cup shaft Orings1 x M4x16 Countersunk Socket head cap screws - bag 101 x Rear Big Bore Shocks - Losi 5ive Blue1 x HPI Baja Rear Brace 4mm - 874881 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x IRC Hing Pins Rear Hub V2 - 866361 x Engine / Cylinder Cover1 x CY 29cc Piston ring - 36x1mm1 x Mugen Fuel Tank Mounts1 x Flywheel Nut1 x Futaba type sliding charing switch1 x M6 Rod Ends & camber + steering ball set1 x M3x35 Socket head cap screws - bag 101 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x Carb & Exhaust screws - 154821 x Torx Screw Kit Elcon etc - High tensile Steel1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x M5x5 Grub Set Screw1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x center tower brake cam set1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x 29cc Piston Rebuild Kit Set (36mm)1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x CY Engine FlyWheel (Rotor)1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x 2x Nitro Silicone Switch Cover - Futaba etc1 x 26cc Piston Rebuild Kit Set (34mm)1 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CRT Chassis Gaskets1 x Battery box bracket HPI Rush box - Savage X1 x Dgobone Drive Pin Set 5x24mm1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x Baja Diff Cup side screws1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x M3 Spring Washer Zinc plated - bag 201 x Clear Anodized Shock Cap1 x differential cross pins TT MT4 - 6x1 x Ceter tower diff mounts Front & Rear1 x Short Big Bore Rod Ends - M81 x innovative-rc Losi 5ive Diff Cup / Case1 x HPI Baja stearing servo adapter mount - Blue1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x IRC Hing Pins Rear Top V2 - 866351 x 3x Losi 8ight-T Diff Cup - Black1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x M3 Nylock nut bag of 201 x Innovative-RC Big Bore Shock Socks - Blue1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x Innovative-RC Big Bore Shock Socks - Green1 x Baja Front Upper Brace - 874811 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x 2x Savage Diff Cup Case1 x Engine Clutch bottom spacer RED - 875711 x Nitro Engine Piston Stopper1 x Flux Black Anodized Standard LCG TVP Kit1 x 1x Losi Muggy Diff Cup - Silver1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x M3 washers - Zinc plated bag 201 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x M8 Rod Ends for Big Bore Shocks1 x M3x16 Socket head cap screws - bag 101 x Baja Bush Set1 x Engine Clutch bottom spacer 6.5mm - 875711 x Center Tower bearing set1 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x Innovative-RC Dual Brake Kit1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x 2x Top shock support brackets - Savage x1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x M2.5 Nylock Nuts - Bag 101 x Losi Steel King Pins B20741 x Losi 5ive Spring Adjuster Ring1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x 10x16x0.3 Steel Shim - Pack 10
Reviews
Engine Clutch bottom spacer 6.5mm - 87571
Engine Clutch bottom spacer 6.5mm - 87571
2.95€

<p>i asked Innovative RC if they could make a engine clutch ...