Diff/Bulkhead Housing - Rear Silver B2542

$212.16

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x I-RC Front Baja Big Bore shock Spring - Progressive2 x LCG TVPs, Exstended 1inch back with 6mm Front2 x Spur Gear Spacer - 866162 x CY stock crank set3 x Baja Rear Lower Brace 2 - 874792 x CVD inner Drive set Pins 5x20mm2 x 23 / 26cc & 27cc 4 Bolt Crankcase Set2 x Hex Key Set 8pc T-Handle Metric2 x Extended 6mm Front LCG TVPs Package & dog bone - 4mm2 x UHD Outdrive Rear HPI Baja 5SC size (2x) - 1049675 x M3 washers - Zinc plated bag 204 x IRC Hing Pins Full Set V2 - 10Pins2 x Ofna 250cc Fuel Tank Mounts4 x 6x Differential Gaskets2 x Front Big Bore Shocks - Losi 5ive Black5 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 84 x CVD Pin rebuild kit - B32172 x Piston Pin Washer Set6 x 1x Savage Diff Cup Case1 x Innovative-RC Hoodie - Size XX Large2 x 3x Losi Muggy Diff Cup - Silver2 x HPI Baja Front Upper Plate 4mm Black Anodized - 874844 x M4x30 Socket head cap screws - bag 102 x Piston Roller Pin Bearing5 x Big Bore Shock 5 Hole Piston DUAL Rate2 x Baja Diff o-rings - bag102 x 1x Losi LST1 & LST2 Diff Cup- silver4 x 27cc Piston Rebuild Kit Set (35mm)3 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield2 x M8x25 Socket head cap screws - bag 62 x 3x Thunder Tiger Differential Case MT4 G3 Black2 x HPI Baja Brake Calliper2 x High response clutch set - Red Spring3 x Futaba type sliding charing switch2 x 2x Engine Clutch Bearing Metal Shielded (5x10x4mm)2 x UHD 5mm Outdrive Rear HPI Baja 5SC size (2x) - 1049673 x Out Drive Cup Pins - Bag 62 x Big Bore Shock Blank Piston2 x M4x30 Countersunk Socket head cap screws - bag 103 x HPI Baja stearing servo adapter mount - Blue4 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M7 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty2 x Skid plate for Standard LCG TVPs2 x 6x Differential Gaskets - TT2 x 8x Shock Standoffs - Buggy Shocks2 x Skid Plate for Exstended 6mm TVPs2 x Thunder Tiger Differential Case MT4 G3 Black3 x Dgobone Drive Pin Set 5x24mm2 x Shock Hardware - screws, nuts etc2 x Front Big Bore Shocks - Losi 5ive Silver1 x Engine / Cylinder Cover 4 Bolt3 x IRC Front MID Front big bore springs - Losi 5T2 x Shock Bleed Screw - 4x2 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts2 x HPI Baja Brake Calliper - Black Anodized2 x 2x Losi LST1 & LST2 Diff Cup- silver5 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Carburetor Set WT6682 x Rear Axel - Thunder Tiger MT4 CVD Universal2 x HoBao / Ofna 1/7th Fuel tank - 250cc2 x Front Big Bore Shocks - Losi 5ive Red3 x M2.5x12 Stainles Socket Cap Screw - Bag 101 x V3 Front Big Bore Shocks - Baja 5B 5T2 x Big Bore Shock 5 Hole Piston1 x Full X upgrade Kit5 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x Hellfire Fuel Tank Mounts1 x Baja Bush Set - Black2 x M8 Rod Ends for Big Bore Shocks1 x CY 4 Bolt Gasket set rebuild kit1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Innovative-RC Dual Brake Kit1 x SuperSwitchHD - 1x1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x insulator gasket2 x 4-40x3/8 Button Head socket Screw - Bag 101 x CRT Tower Set - Nickel1 x CY Pull Start Assembly2 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK2 x CY 2 Bolt Gasket set rebuild kit2 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874903 x Innovative-RC Muggy Chassis - Black2 x Skid Plate for Exstended 1inch back, 6mm Front TVPs2 x 4-40x1/2 Socket Head Cap Screw - Bag 102 x Roll Bar for HPI Savage 3mm3 x Front Heavy Duty losi Shock Shaft - 8mm2 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32164 x Engine Plate for LCG TVPs Savage X & LCG TVPs3 x 4mm Nylon brake pipe2 x Losi 5ive Hing Pins A-Arms2 x 2 Bolt heavy duty Cylinder Gasket1 x FILTERED FUEL PICK UP CLUNK2 x M3x12 Countersunk Socket head cap screws - bag 102 x Innovative-RC Carbon Fiber replacement Pads2 x Losi 5ive-T 2.0 servo saver Doube arm V2.02 x 50x 3.5mm Body Clip Bulk - Rpin3 x Baja Bush Set2 x CY Kill Switch Inc rubber cover2 x M5 Hank rivet bush - Bag104 x IRC BLACK MID rear big bore springs - Losi 5T2 x M3x20 Countersunk Socket head cap screws - bag 102 x Baja Diff gear Drive pin - 965012 x LCG (Low Center of Gravity) TVPs - 4mm Thick4 x I-RC Rear Baja Big Bore shock Spring - Progressive2 x 4 Bolt Cylinder Gasket2 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 52 x 2x Flanged Bearing - 10x6x4 3speed3 x Rear Big Bore Shocks - Losi 5ive Silver2 x Rear Fuel tank plate support bracket2 x CVD Drive set Pins 4x20mm B65602 x M3x10 Countersunk Socket head cap screws - bag 102 x Flywheel Key3 x High Response Clutch Spring - Red2 x 1x Losi 8ight-T Diff Cup - Black2 x Thunder Tiger Differential Case MT4 G3 - Red2 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver3 x Ultra Heavy Duty Rear Center Dogbone - 83mm3 x M3 Spring Washer Zinc plated - bag 201 x ProLux Stone Fuel Filter - Grey2 x M4x4 Grub Screws2 x Shock Tower Brace - Blue4 x Innovative-RC Muggy Chassis - Silver2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm3 x Air Filter Gasket2 x Innovative-RC Muggy radio tray set2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x M2.5x10mm Socket Head Cap Screw - Bag of 102 x 10x 6mm Body Clip - Rpin1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x M3x12 Socket head cap screws - bag 101 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x Piston Pin 23 & 26cc - 8x25mm1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Baja Shock spring retainer - Heavy Duty Springs1 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Wheel Spacer Adapters - GRP & MCD Wheels3 x O-Ring Diff Cups - 5.5x2mm2 x M5 Captive Nuts / T Nuts - Bag101 x M4 Nylock nut bag of 201 x 3x Thunder Tiger Differential Case MT4 G3 Silver1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x CY Exhaust Gasket2 x 2x Savage Diff Cup Case1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Losi Steel King Pins B20741 x 4mm flexable brake pipe1 x M5 washers - Zinc plated bag 201 x CRT Tower Set - Silver1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x Turnbuckle / Tie-Rod relocation bracket1 x MCD & Savage Shock Spring -3mm1 x MT4 Chassi Gaskets - 6x1 x Baja Diff Cup side screws1 x Innovative-RC Hoodie - Size Large1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x M3x16 Socket head cap screws - bag 101 x Big Bore shock Spring Retainers - Aluminium1 x 1x Losi 8ight-T Diff Cup - Silver1 x HPI Baja Rear Brace 4mm - 874883 x HPI Baja Brake Calliper - Blue Anodized1 x Carburetor Gasket1 x IRC Red UHD Front big bore springs1 x 10x16x1.0 Steel Shim - Pack 101 x Baja Shock Top Mounts - Front1 x Shock O-Ring Kit1 x 2x Top shock support brackets - Savage x1 x Ceter tower diff mounts Front & Rear1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x CY Insulator manifold1 x HPI Baja Screw Kit (all models) - High tensile1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x HPI BAja Left Side Engine Mount Brace - 874891 x Diff/Bulkhead Housing - Rear Silver B25421 x Baja Shock Top Mounts - Rear1 x MCD & Savage Shock Spring -2.7mm1 x Rear Shock end Ball - 11mm1 x M6 washers - Zinc plated bag 201 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x X Upgrade Kit1 x I-RC Losi Big Bore rear shock Spring - 66lb2 x HPI Baja Front Upper Plate 4mm - 874841 x Pull Start Thumb Screws1 x MCD & Savage Shock Spring - 2.5mm1 x 2x 12x24x6mm Bll Bearing Metal Shield- B0891 x Innovative-RC TT MT4 trayless Kit - RED2 x 4x Complete Innovative Silver Anodized Savage Shocks1 x 5x 2.5x14mm CVD Dowel Pins1 x M3x3 Grub Set screw1 x ProLux Light Weight rebuildable fuel filter - large1 x CRT Chassis Gaskets1 x Big Bore Shock Body All Colours - Losi Front1 x Savage Big Bore shock Socks - Black1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Mugen Fuel Tank Mounts3 x M3x10 Socket head cap screws - bag 101 x M4x16 Socket head cap screws - bag 101 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x M8x20 Socket head cap screws - bag 61 x TurtleRacing Rear shock mounts1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x T PushFit Connector 4mm1 x HPI MT2 Diff Cup Case Black - 1x1 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x 4x Hong nor CRT Shock standoffs1 x Torx Screw Kit Elcon etc - High tensile Steel1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies2 x 2x Nitro Silicone Switch Cover - Futaba etc1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Outdrive cup shaft Orings1 x Battery box bracket HPI Rush box1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x 27cc (35mm) Cylinder Head 2 Bolt1 x 4mm Standard LCG TVPs Package - 4mm1 x 3x6x0.3 Steel Shim - Pack 101 x Crankcase engine Seal set - Viton type
Reviews
Skid Plate for Exstended 1inch back, 6mm Front TVPs
Skid Plate for Exstended 1inch back, 6mm Front TVPs
$14.98

got this last week and fits perfect and holds all the tvps n...