Extended 1inch Rear & 6mm Front Race TVP Kit

£66.00

Product may vary slightly from image representation.
  • Model:ext1&6-race
Live Stock Check: 0 units
Share This Product

 

The ideal upgrade for any serious racer who is all ways looking for the best possible performance.
Allays trying to save them extra few seconds from a race lap or fed up of getting beaten by that split second now is your chance to save some critical weight and earn back them few vital seconds.

These TVPs are specially design with racing in mind where lightens is a key aspect while also maintaining the utmost critical strength within the design.

These TVPs are extended 1inch at the back with 6mm front in length and use a 119mm dog bone. TVPS are made from 6082-T6 2.5mm thick.
TVPs are full Mid tank ready with pre-drilled holes for fixing of servos and tank, Full mid tank kit (see our midtank kit page)

Weight comparison table :-

TVP Weight - TVPs Weight - Complete
2.5mm Innovative-RC EXT 1inch & 6mm Race TVPs 6.2oz (175g) 12.5oz (353g)
4mm Innovative-RC bash TVPs 9.7oz (275g) 14.5oz (412g)
standard non LCG HPI 5.8oz (165g) ------
5mm LCG HPI TVP (SavageX) 5.4oz (152g) ------

Note: Weight- TVPs= weight of left & right TVP only, Weight complete= weight of TVP,Skid plate,engineplate & screws.
- weights above should be used as a guide line only.

Included Items :-
1x extended 1inch at the back with 6mm front LCG Race TVPs.
1x LCG Engine plate.
1x extended 1inch at the back with 6mm front  length skid plate.
1x TVP screw kit - Hardend grade 12.9 socket cap screws.

Detailed specification of parts:-
TVPs :-
These TVPs are lowered on the Engine and Gearbox giving the savage a more stable and lower ride height. These are made from 2.5mm thick 6082-T6 Aluminum.

12mm lowered on Engine & Gearbox.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them also allows for mounting of any standard roll bar.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG Race extended 1inch at the back with 6mm front TVPs.
Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Roto Start:-
Please note, Roto unit will work with HPI quick access bulkheads found on savage X with no mods, when using standard hpi bulkheads please note ofna roto unit will need to be used or modding of the bulk head unit. after market bulks eg GPM work fine with out the cross brace and allow stock roto to be used.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm2 x 4mm Shock Rod Ends2 x M4x10 Button Head Socket cap screws - bag 102 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm2 x Big Bore Shock Blank Piston2 x NGK Spark Plug CMR7H2 x Blue Anodized Shock Cap2 x Full X upgrade Kit2 x HPI Baja Rear Lower Brace - 874802 x 2x Flanged Rubber Shield 10x6x3mm2 x X Arm shock mounts - 4x2 x X Upgrade Kit2 x Baja Upper Front Arm Brace Upper Blue2 x Shock Hardware - screws, nuts etc2 x Center Tower bearing set2 x Losi Steel King Pins B20741 x Maxima Air Filter Cleaner - Spray2 x Silkolene - Foam Filter Oil 1L2 x Baja Diff gear holders1 x I-RC Front Baja Big Bore shock Spring - Progressive2 x 23cc (32mm) Cylinder Head - 2 Bolt2 x Brake plate spacer Blue - 874972 x M3x25mm Socket Cap Screw - BAG 102 x Big Bore shock Spanner2 x Innovative-RC Hoodie - Size X Large2 x ProLux Stone Fuel Filter - Grey2 x MCD & Savage Shock Spring - 2.0mm2 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x Black Anodized Roll Bar1 x CRT Tower Set - Silver2 x IRC Shock Spring Retainer2 x Black Shock Spring Adjuster Ring2 x HPI Baja Brake Calliper - Black Anodized1 x Losi 5ive Spring Retainers1 x HPI Baja Right Side Engine Mount Brace RED - 874901 x 4x Complete Innovative Silver Anodized Savage Shocks2 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x Baja Shock Top Mounts - Rear1 x Smart-Fly - Pin & Flag1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x HPI BAja Left Side Engine Mount Brace - 874891 x 4x Savage Steering post bearings - 6x10x3mm1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x Flux Black Anodized Standard LCG TVP Kit1 x M6 Rod Ends & camber ball set1 x Innovative-RC Muggy radio tray set1 x M3 Nylock nut bag of 201 x 3x6x0.3 Steel Shim - Pack 101 x M3x20 Socket Cap Screws - Bag of 101 x Clear Anodized Shock Cap - Silver1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Baja Rear Lower Brace 2 - 874791 x M3x8 Socket head cap screws - bag 101 x M3x10 Socket head cap screws - bag 101 x ProLux Stone Fuel Filter - RED1 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt
Reviews
Diff/Bulkhead Housing - Rear Silver B2542
Diff/Bulkhead Housing - Rear Silver B2542
£170.00

<p>Hi, I&#39;m leaving this review as I had purchased a chin...