4x Complete Innovative Red Anodized Savage Shocks

$160.47

Product may vary slightly from image representation.
  • Model:Sav-BB-RED
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
     
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Grabbed a set of these for my CEN Reeper after seeing someone on YouTube run them. Build quality is superb. Not too many options out there for the Reeper so I was happy everything went together well. All included hardware was solid and they mounted up easily. (I had to drill the mounts to fit the stock Reeper upper mounting screw size) The only thing I found difficult was the lower shock cup doesn't have a slot to fit around the piston so I had to fill and bleed with the spring on but it worked.

Rated by John
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x HPI Baja Rear Brace 4mm - 874881 x Innovative-RC T-Shirt - Size Large1 x M4x16 Socket head cap screws - bag 101 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Losi 5ive Engine mount inserts - #201 x 10x 3.5mm Body Clip - Rpin1 x Diff/Bulkhead Housing Screw Set1 x Baja Rear Lower Brace 2 Blue - 874791 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Piston Roller Pin Bearing1 x Front Axel - Thunder Tiger MT4 CVD Universal1 x Diff/Bulkhead Housing - Rear Silver B25421 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x Blue Big Bore shock Spring Retainers - Aluminium1 x HPI BAja Left Side Engine Mount Brace RED - 874891 x M3x8 Countersunk cap screws - bag 101 x Clutch Shoe Holder Mount1 x Losi Titanium Grade 5 King Pins B20741 x Baja Front Lower Brace Blue - 874781 x Losi 5ive Hing Pins A-Arms1 x Mugen Fuel Tank Mounts1 x Engine / Cylinder Cover1 x 4x8x0.3 Steel Shim - Pack 101 x Battery box bracket HPI Rush box1 x losi 5ive diff inserts1 x Innovative-RC TT MT4 trayless Kit - RED1 x HPI Baja wheel drive pin 4x281 x Crankcase engine Seal set - Nitrile type1 x CY 2 Bolt Gasket set rebuild kit1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x M4x16 Countersunk Socket head cap screws - bag 101 x I-RC Losi Big Bore rear shock Spring - 66lb1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x Roll Bar for HPI Savage 3mm1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Front Heavy Duty losi Shock Shaft - 8mm1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x Spur Gear Spacer RED - 866161 x 27cc (35mm) Cylinder Head 2 Bolt1 x 1x Losi Muggy Diff Cup - Black1 x 4 Bolt Cylinder Gasket1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x CY Replacement Crank Case Gasket1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x M4x30 Socket head cap screws - bag 101 x Carb & Exhaust screws - 154821 x ProLux Light Weight rebuildable fuel filter - large1 x Steering Crank shaft1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x 4mm flexable brake pipe1 x Crankcase engine Seal set - Viton type1 x Diff/Bulkhead Housing - Front Silver1 x Rear Big Bore Shocks - Losi 5ive Black1 x Front Big Bore Shocks - Losi 5ive Black1 x Innovative-RC Hoodie - Size Small1 x CY Insulator manifold1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x Innovative-RC Foam Filter Oil - 100ml1 x Shock Bush short1 x LCG TVPs, Exstended 1inch back with 6mm Front1 x Baja Diff bush - B0801 x M3x16 Countersunk Socket head cap screws - bag 101 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Baja Front Upper Brace - 874811 x Torx Screw Kit Elcon etc - High tensile Steel1 x CY Kill Switch Inc rubber cover1 x Innovative-RC Muggy Chassis - Silver1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x 4x Complete Innovative Red Anodized Savage Shocks1 x IRC Black HD Rear Big Bore Springs1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Piston Pin 23 & 26cc - 8x25mm1 x Baja Diff Cup side screws1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x M6 Rod Ends & Steering ball set1 x Front Big Bore Shocks - Losi 5ive Blue1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x differential cross pins TT MT4 - 6x1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x 3x Losi 8ight-T Diff Cup - Silver1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x Baja Diff o-rings - bag101 x M4 Nylock nut bag of 201 x Innovative-RC Muggy radio tray set - Black1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x Shock Tower Brace - Black1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x 8x Shock Standoffs - Standard Shocks1 x Futaba type sliding charing switch1 x M6 Rod Ends - Left hand thread1 x M3x10 Button Head Socket cap screws - bag 101 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x High Response Clutch Spring - Red1 x innovative-rc Losi 5ive Diff Cup / Case1 x Baja Rear lower arm brace Red - 874801 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Losi 5ive Diff Gaskets - 6x1 x Savage Shock Bottom End Cap1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x HPI Baja Brake Calliper1 x center tower brake cam set1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x Battery box bracket HPI Rush box - Savage X1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x SuperSwitchHD - 1x1 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x O-Ring Diff Cups - 5.5x2mm1 x Losi 5T 5B Shock Towers - Front1 x Losi 5ive Engine mount inserts - #191 x M3 Spring Washer Zinc plated - bag 201 x 1x Losi 8ight-T Diff Cup - Black1 x HPI Baja wheel drive pin 5x24- 965041 x Center Tower throttle supports1 x 4x Savage Steering post bearings - 6x10x3mm1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x HPI Baja Brake Calliper - Blue Anodized1 x Innovative-RC Muggy Chassis - Black1 x HPI Baja stearing servo adapter mount - Black1 x Flux Black Anodized Standard LCG TVP Kit1 x High response clutch set - Red Spring1 x Brake pad screws - IRC Center Tower to IRC Pads1 x 2x Savage Diff Cup Case1 x 2 Bolt heavy duty Cylinder Gasket1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x NGK Spark Plug CMR7H1 x ProLux Stone Fuel Filter - RED1 x Silkolene - Foam Filter Oil 1L1 x 4x Hong nor CRT Shock standoffs1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Big Bore Shock Blank Piston1 x 2x Flanged Rubber Shield 10x6x3mm1 x I-RC Baja Big Bore front shock Spring - Stock1 x MCD & Savage Shock Spring - 2.5mm1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x M4x10 Button Head Socket cap screws - bag 101 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x Baja Rear Lower Brace 2 - 874791 x Losi Steel King Pins B20741 x Center Tower bearing set1 x HPI Baja Rear Lower Brace - 874801 x M3x25mm Socket Cap Screw - BAG 101 x Big Bore shock Spring Retainers - Aluminium1 x Brake plate spacer Blue - 874971 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x Losi 5T 5B Shock Towers V2 - Rear1 x CY 29cc Piston ring - 36x1mm1 x IRC Hing Pins Rear Hub V2 - 866361 x Engine / Cylinder Cover 4 Bolt1 x Shock Cap O-Ring Spacers1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Innovative-RC Hoodie - Size X Large1 x 10x 6mm Body Clip - Rpin1 x Rear Fuel tank plate support bracket1 x Rear Shock end Ball - 11mm1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x Red Big Bore shock Spring Retainers - Aluminium1 x HPI Baja wheel drive pin - 965041 x 90Deg PushFit 4mm tube M51 x Black Shock Spring Adjuster Ring1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x Big Bore Shock 4 Hole Piston1 x 2x Flanged Bearing - 10x6x4 3speed1 x M4x4 Grub/Set Screw1 x HPI MT2 Diff Cup Case Black - 1x1 x HPI Baja Right Side Engine Mount Brace RED - 874901 x Big Bore Shock 3 Hole Piston DUAL Rate1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x HPI Baja Brake Calliper - Black Anodized1 x insulator gasket1 x CY 27cc Piston ring - 35x1mm
Reviews
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
$60.18

love these shafts they look and feel so sturdy have had no t...