4x Complete Innovative Black Anodized Savage Shocks

£120.00

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Shock Tower Brace - Silver1 x Baja Diff bush - B0801 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x M3x35 Socket head cap screws - bag 101 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x Innovative-RC Hoodie - Size Small1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x CY Pull Start Assembly1 x Losi 5ive drive cup Clips1 x differential cross pins TT MT4 - 6x1 x M4x12 Socket head cap screws - bag 101 x HPI Baja Shorty Servo Mount Brace1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x HPI Baja Screw Kit (all models) - High tensile1 x M4x4 Grub Screws1 x HPI Baja Brake Calliper - Blue Anodized1 x CY Engine FlyWheel (Rotor)1 x MCD Fork Ends set 4 - 8mm1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x M6 Captive Nuts / T Nuts - Bag101 x 3x Losi Muggy Diff Cup - Silver1 x M4x12 Countersunk Socket head cap screws - bag 101 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x Out Drive Cup Pins - Bag 61 x Baja Shock Spring Retainer - Slotted1 x I-RC Baja Big Bore front shock Spring - Stock1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x Nitro Engine Piston Stopper1 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Baja Rear Lower Brace 2 - 874791 x M3x8 Socket head cap screws - bag 101 x Battery box bracket HPI Firestorm - Savage X1 x 4x Hong nor CRT Shock standoffs1 x Big Bore Shock Blank Piston1 x X Upgrade Kit1 x M4x10 Button Head Socket cap screws - bag 101 x Shock Hardware - screws, nuts etc1 x HPI Baja Rear Lower Brace - 874801 x 23cc (32mm) Cylinder Head - 2 Bolt1 x M3x10 Socket head cap screws - bag 101 x NGK Spark Plug CMR7H1 x Baja Upper Front Arm Brace Upper Blue1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x Brake plate spacer Blue - 874971 x Innovative-RC Hoodie - Size X Large1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Maxima Air Filter Cleaner - Spray1 x ProLux Stone Fuel Filter - Grey1 x M3x25mm Socket Cap Screw - BAG 101 x Brake plate spacer - 874971 x Battery box bracket HPI Firestorm
Reviews
CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B3224
CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B3224
£45.00

have had a set on the front of my 5iveT for a good while now...