4x Complete Innovative Black Anodized Savage Shocks

£120.00

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x 10x 3.5mm Body Clip - Rpin1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x 4x8x0.3 Steel Shim - Pack 101 x CVD inner Drive set Pins 5x22mm1 x Bearing Puller1 x 90Deg PushFit 4mm tube M51 x HPI Baja wheel drive pin - 965041 x 26cc (34mm) Cylinder Head - 2 Bolt1 x Big Bore Shock 4 Hole Piston1 x 2x Flanged Bearing - 10x6x4 3speed1 x M4x4 Grub/Set Screw1 x HPI MT2 Diff Cup Case Black - 1x1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x Losi 5ive Spring Adjuster Ring1 x HPI Baja Right Side Engine Mount Brace RED - 874901 x CVD Drive set Pins 4x20mm B65601 x Big Bore Shock 3 Hole Piston DUAL Rate1 x CY 27cc Piston ring - 35x1mm1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x insulator gasket1 x 4x Complete Innovative Silver Anodized Savage Shocks1 x Losi 5ive Spring Retainers1 x HPI Baja Brake Calliper - Black Anodized1 x 10x16x0.3 Steel Shim - Pack 101 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x 1x Losi LST1 & LST2 Diff Cup - Black1 x Black Anodized Standard LCG TVP Kit1 x 6x Differential Gaskets - TT2 x LipoBox - 4S2 x V3 Rear Big Bore Shocks - Baja 5B 5T2 x Diff/Bulkhead Housing Bearings - 15x28x7mm2 x Losi 5T 5B Shock Towers Bash - Front SILVER2 x Dgobone Drive Pin Set 5x24mm2 x Front Heavy Duty Baja Shock Shaft V2 - 8mm2 x I-RC Front Baja Big Bore shock Spring - MID Progressive2 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm2 x Baja Bush Set2 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32182 x CY Engine FlyWheel (Rotor)2 x M8x20 Socket head cap screws - bag 62 x M3 washers - Zinc plated bag 202 x Innovative-RC TT MT4 trayless Kit - Blue2 x HPI Savage Screw kit (all models) - High tensile2 x Center Tower top plate for truck V1.02 x CY 23cc Piston Ring - 32x1mm2 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon2 x Shock O-Ring Kit1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals2 x 3x Losi 8ight-T Diff Cup - Black2 x M4 Washer Zinc plated bag 202 x IRC Red UHD rear big bore springs2 x M4x12 Socket head cap screws - bag 102 x Front Big Bore Shocks - Losi 5ive Red2 x 23cc (32mm) Cylinder Head - 4 Bolt2 x Center Tower to Clutch suport brace V2.02 x Baja Front Lower Brace Black Anodized 7075-T6 - 874782 x HPI Baja stearing servo adapter mount - Black2 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 3x Losi Muggy Diff Cup - Silver1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Baja Shock Spring Retainer - Slotted1 x TurtleRacing Rear shock mounts2 x 2x Savage Diff Cup Case2 x M3x16 Socket head cap screws - bag 101 x Piston Snap Ring Set1 x M4x12 Countersunk Socket head cap screws - bag 101 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x HPI Baja stearing servo adapter mount2 x 2x Top shock support brackets - Savage x1 x Losi 5ive Front and rear shock end ball1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x 2 Bolt heavy duty Cylinder Gasket1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x M4x10 Countersunk Socket head cap screws - bag 101 x NGK Spark Plug CMR7H1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T2 x Shock Tower Brace - Blue1 x Innovative-RC Big Bore Shock Socks - Orange1 x 27cc (35mm) Cylinder Head 4 Bolt1 x IRC Red UHD rear big bore springs - Losi 5T1 x M3x12 Socket head cap screws - bag 101 x Crank Case Sealed bearing 12x28x8- 60012RS2 x Battery box bracket HPI Firestorm - Savage X2 x Silkolene - Foam Filter Oil 1L2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long2 x MCD & Savage Shock Spring - 2.5mm2 x 2x Losi LST1 & LST2 Diff Cup - Black2 x I-RC Baja Big Bore front shock Spring - Stock2 x M4x10 Button Head Socket cap screws - bag 102 x Baja Rear Lower Brace 2 - 874792 x Innovative-RC HPI BAJA 5B & 5T Spur Gear - 54T2 x 2x Flanged Rubber Shield 10x6x3mm2 x Maxima Air Filter Cleaner - Spray1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Black Big Bore shock Spring Retainers - Aluminium1 x Spur Gear Spacer Blue - 866161 x Spur Gear Spacer Black - 866161 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Baja Bush Set - Black1 x M5x5 Grub Set Screw1 x LipoBox - 6S1 x M3x35 Socket head cap screws - bag 101 x 26cc (34mm) Cylinder Head - 4 Bolt1 x M3x3 Grub Set screw1 x Right Clutch Spacer - 875551 x Baja Diff gear Drive pin - 965011 x Shock Bush short1 x Innovative-RC Hoodie - Size Small1 x CY Pull Start Assembly1 x Center Tower top plate for truck V2.01 x CY Insulator manifold1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Torx Screw Kit Elcon etc - High tensile Steel1 x Baja Diff bush - B0801 x Innovative-RC Muggy Chassis - Silver1 x CY Kill Switch Inc rubber cover1 x IRC Black HD Rear Big Bore Springs1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x Baja Front Upper Brace - 874811 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x Piston Pin 23 & 26cc - 8x25mm1 x LCG TVPs, Exstended 1inch back with 6mm Front1 x Clear Anodized Shock Cap1 x IRC Red UHD Front big bore springs - Losi 5T1 x M4x10 Socket head cap screws - bag 101 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x HPI Firestorm battery box1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x Savage Rod End 10mm Balls1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x Center Tower throttle supports1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x 4mm Shock Rod Ends1 x HPI Baja Shorty Servo Mount Brace1 x Innovative-RC Carbon Fiber replacement Pads1 x HPI BAja Left Side Engine Mount Brace - 874891 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x NGK Spark Plug CMR5H1 x HPI Baja Brake Calliper - Blue Anodized1 x CY 26cc Piston ring - 34x0.7mm1 x Flux Black Anodized Standard LCG TVP Kit1 x IRC Front MID Front big bore springs - Losi 5T1 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x Innovative-RC Dual Brake Kit1 x 4x Savage Steering post bearings - 6x10x3mm1 x M6 Rod Ends - Right hand thread1 x High response clutch set - Red Spring1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x IRC Hing Pin screw & washer set1 x IRC Hing Pins Full Set V2 - 10Pins1 x 8x Shock Standoffs - Buggy Shocks1 x ProLux Stone Fuel Filter - RED
Reviews
3x Thunder Tiger Differential Case MT4 G3 Silver
3x Thunder Tiger Differential Case MT4 G3 Silver
£25.00

<p>These parts are superb, awesome workmanship and a great p...