Front Big Bore Shocks - Losi 5ive Silver

£109.75

Product may vary slightly from image representation.
  • Model:5ive-frontsh
Live Stock Check: 1 units
Share This Product

 

Innovative-RC Losi 5ive Front Big Bore Shocks - Silver

After Months of testing we are pleased to release the Innovative-RC Losi 5ive Big Bore shocks, Innovative-RC 'Big Bore' shocks are purposely built from the ground up using no stock parts what so ever. Giving a true after market shock with many features over stock shocks...with full spares of every part available.

Based around our proven big bore baja shocks we have kept the large oversized shock body of 20mm which gives plenty of volume for oil backed up by a 8mm high tensile steel shaft that is precision ground for roundness and most important of all that perfect oil seal surface in all running conditions. No large shock shaft would be complete without a full Umbrella/Oil seals to give the best possible oil seal, that is also backup up by other seals to keep all that fine track dirt and sand out of the shock making leaks a thing of the past. So no expensive seal upgrades are needed!!

Each shock Cap Contains a bleeder hole for easy quick assemble and bleeding of the shocks once filled with oil removing all air and excess oil quickly and efficiently. While the shock body has a fully adjustable unlimited potion adjust that screws up and down the length of the shock body giving that ideal shock spring set-up for any track or condition that might come into play.

Each shocks Spring retainer is full housed on the shock shaft & rose joint meaning the spring retainer can no longer come loose meaning no more lost or loose spring retainers. (a slotted version is sold as after market upgrade for those who like fast change spring setups)

Shock body’s also have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Shocks come complete with Progressive springs as standard giving you a soft top ride of the shock and a firmer lower spring travel when needed. Giving a nice fine balance over a mixed surface setup.

shock springs included on IRC Losi Shocks
Front –2.7Wire gauge , 20kg(~44lb) Spring Weight
Rear – 3.2mm Wire gauge, 30kg(~66lb)
*Spring weight is taken in fully compressed state

.:Over View:

  • Massive 8mm hardened steel shock shaft - ground round for a perfect seal

  • Shock body's have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish

  • Spanner Flats on all shock body for easy assembly and maintenance.

  • Spanner flats on shock shafts

  • Springs as standard

  • 2x Losi 5ive Big Bore shocks - pre assembled.

  • 2x Bottom rose joint balls for mounting.

  • 2x top shock mount pivots for Stock mounting

  • screws & hardware for mounting shocks.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

  • Same length as stock shocks, so direct fit.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Custom Shock Socks available from us & groovy_gaiters

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 35-40wt front, 45-50wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Clutch Shoe Holder Mount1 x losi 5ive diff inserts1 x 4mm flexable brake pipe1 x Baja Diff gear Drive pin - 965011 x Spur Gear Spacer Black - 866161 x 27cc piston (35mm)1 x Wheel Spacer Adapters - GRP & MCD Wheels2 x 23cc (32mm) Cylinder Head - 4 Bolt2 x I-RC Losi Big Bore rear shock Spring - 66lb1 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt1 x 26cc piston (34mm) - For 0.7mm Ring1 x HPI Baja Brake Calliper1 x 6x Differential Gaskets1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x IRC Hing Pins Rear Hub V2 - 866361 x 10x 3.5mm Body Clip - Rpin1 x CY Engine FlyWheel (Rotor)1 x Maxima Air Filter Cleaner - Spray1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x CY 29cc Piston ring - 36x1mm1 x Thunder Tiger Differential Case MT4 G31 x Baja Diff Cup side screws1 x Air Filter Gasket1 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x 4x Complete Innovative Silver Anodized Savage Shocks1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Motorex Air Filter Oil - spray1 x Diff/Bulkhead Housing - Rear Silver B25421 x High Response Clutch Spring - Red1 x Baja Diff Oring Seal1 x TurtleRacing Rear shock mounts1 x M8 Rod Ends for Big Bore Shocks1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x HPI Savage Screw kit (all models) - High tensile1 x Flux Black Anodized 1"+6mm LCG TVP Kit2 x 90Deg PushFit 4mm tube M51 x Big Bore shock Spanner1 x CY Clutch case Housing1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Baja Front Lower Brace - 874781 x 23cc piston (32mm)1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Innovative-RC Hoodie - Size XX Large1 x Flywheel Key1 x Big Bore Shock 4 Hole Piston1 x Big Bore Shock 2 Hole Piston1 x Pull Start Thumb Screws2 x Shock Cap O-Ring Spacers1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x M3x3 Grub Set screw1 x Engine / Cylinder Cover2 x HPI Baja Brake Calliper - Blue Anodized1 x M3x10 Button Head Socket cap screws - bag 101 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x innovative-rc Losi 5ive Diff Cup / Case1 x 10x 6mm Body Clip - Rpin1 x Out Drive Cup Pins - Bag 61 x Extended 6mm Front LCG TVPs Package & dog bone - 4mm1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x NGK Spark Plug CMR7H1 x Clear Anodized Shock Cap2 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Crankcase engine Seal set - Nitrile type1 x Flywheel Nut1 x Servo Y Lead JR, Futaba, Hitec etc1 x Carb & Exhaust screws - 154821 x Roll Bar for HPI Savage 3mm1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x 3x Thunder Tiger Differential Case MT4 G3 Silver1 x Carburetor Gasket1 x 26cc piston (34mm) 4Bolt1 x Holts Brake Cleaner1 x Baja Shock Spring Retainer - Slotted1 x Losi 5ive top shock mounts1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt1 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x Front Axel - Thunder Tiger MT4 CVD Universal1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty
Reviews
Engine Clutch bottom spacer 6.5mm - 87571
Engine Clutch bottom spacer 6.5mm - 87571
£2.50

<p>i asked Innovative RC if they could make a engine clutch ...