4x Complete Innovative Silver Anodized Savage Shocks

$149.76

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 0 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
     
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x Clutch Shoe Holder Mount1 x losi 5ive diff inserts1 x 4mm flexable brake pipe1 x Baja Diff gear Drive pin - 965011 x Spur Gear Spacer Black - 866161 x 27cc piston (35mm)1 x Wheel Spacer Adapters - GRP & MCD Wheels2 x 23cc (32mm) Cylinder Head - 4 Bolt2 x I-RC Losi Big Bore rear shock Spring - 66lb1 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt1 x 26cc piston (34mm) - For 0.7mm Ring1 x HPI Baja Brake Calliper1 x 6x Differential Gaskets1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x IRC Hing Pins Rear Hub V2 - 866361 x 10x 3.5mm Body Clip - Rpin1 x CY Engine FlyWheel (Rotor)1 x Maxima Air Filter Cleaner - Spray1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x CY 29cc Piston ring - 36x1mm1 x Thunder Tiger Differential Case MT4 G31 x Baja Diff Cup side screws1 x Air Filter Gasket2 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x 4x Complete Innovative Silver Anodized Savage Shocks1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Motorex Air Filter Oil - spray1 x Diff/Bulkhead Housing - Rear Silver B25421 x High Response Clutch Spring - Red1 x Baja Diff Oring Seal1 x TurtleRacing Rear shock mounts2 x M8 Rod Ends for Big Bore Shocks1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x HPI Savage Screw kit (all models) - High tensile1 x Flux Black Anodized 1"+6mm LCG TVP Kit2 x 90Deg PushFit 4mm tube M51 x Big Bore shock Spanner1 x CY Clutch case Housing2 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Baja Front Lower Brace - 874781 x 23cc piston (32mm)1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Innovative-RC Hoodie - Size XX Large1 x Flywheel Key1 x Big Bore Shock 4 Hole Piston1 x Big Bore Shock 2 Hole Piston1 x Pull Start Thumb Screws2 x Shock Cap O-Ring Spacers1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x M3x3 Grub Set screw1 x Engine / Cylinder Cover2 x HPI Baja Brake Calliper - Blue Anodized1 x M3x10 Button Head Socket cap screws - bag 101 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x innovative-rc Losi 5ive Diff Cup / Case1 x 10x 6mm Body Clip - Rpin1 x Out Drive Cup Pins - Bag 62 x Extended 6mm Front LCG TVPs Package & dog bone - 4mm1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x NGK Spark Plug CMR7H1 x Clear Anodized Shock Cap2 x V3 Rear Big Bore Shocks - Baja 5B 5T2 x Crankcase engine Seal set - Nitrile type1 x Flywheel Nut1 x Servo Y Lead JR, Futaba, Hitec etc1 x Carb & Exhaust screws - 154821 x Roll Bar for HPI Savage 3mm1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x 3x Thunder Tiger Differential Case MT4 G3 Silver2 x Carburetor Gasket1 x 26cc piston (34mm) 4Bolt1 x Holts Brake Cleaner1 x Baja Shock Spring Retainer - Slotted1 x Losi 5ive top shock mounts2 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt1 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x Front Axel - Thunder Tiger MT4 CVD Universal1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Big Bore Shock 3 Hole Piston1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x Losi Steel King Pins B20742 x 23cc (32mm) Cylinder Head - 2 Bolt1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x HPI Firestorm battery box1 x 2x Savage Diff Cup Case2 x CY Flywheel / Fan Cover1 x 26cc Piston Rebuild Kit Set (34mm)1 x CY 26cc Piston ring - 34x1mm1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x M5x5 Grub Set Screw2 x HPI Baja wheel drive pin 4x281 x 26cc (34mm) Cylinder Head - 4 Bolt1 x Flux Black Anodized Standard LCG TVP Kit1 x Engine Clutch bottom spacer Black - 875711 x Carburetor Set WT6681 x Shock Bottom End Cap1 x 2 Bolt heavy duty Cylinder Gasket1 x Baja Rear Lower Brace 2 - 874791 x Shock Bleed Screw - 4x1 x Front Big Bore Shocks - Losi 5ive Blue1 x Innovative-RC Big Bore Shock Socks - Black1 x M6 Rod Ends - Right hand thread2 x CY Exhaust Gasket1 x IRC Black HD Rear Big Bore Springs1 x Piston Pin Washer Set1 x Losi 5ive Hing Pins A-Arms1 x CVD Pin rebuild kit - B32172 x Baja Diff o-rings - bag101 x Losi 5ive Diff Gaskets - 6x1 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x 27cc Piston Rebuild Kit Set (35mm)1 x HPI Baja stearing servo adapter mount - Blue1 x Shock Hardware - screws, nuts etc1 x M5 Hank rivet bush - Bag101 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x M4x10 Button Head Socket cap screws - bag 102 x 27cc (35mm) Cylinder Head 4 Bolt1 x 29cc Piston (36mm)1 x Baja Shock Top Mounts - Rear1 x CY 23cc Piston Ring - 32x1mm1 x Front Big Bore Shocks - Losi 5ive Red1 x CY 27cc Piston ring - 35x1mm1 x Piston Snap Ring Set1 x Baja Big Bore Shock O-Ring Kit1 x Losi 5ive Spring Retainers1 x Engine Clutch bottom spacer stock - 875711 x IRC Red UHD rear big bore springs - Losi 5T1 x CY Pull Start Assembly1 x M4 Nylock nut bag of 201 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x CY 4 Bolt Gasket set rebuild kit1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x Baja Bush Set1 x Losi Titanium Grade 5 King Pins B20741 x M6 Captive Nuts / T Nuts - Bag101 x 50x 6mm Body Clip Bulk - Rpin1 x 26cc piston (34mm)1 x Shock Bush short1 x HPI Baja stearing servo adapter mount - Black1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm
Reviews
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
$87.36

Brought this to convert my original savage XL to a low centr...