LST Shock Kit HPI Savage X & Flux with X Arms 5mm

29.52€

Product may vary slightly from image representation.
  • Model:SAVXLST2
Available Options
Live Stock Check: 0 units
Share This Product

LST shock mounting Kit For HPI Savage X or Flux models with X arms. Contains 5mm top brackets
this kit for mounting the lst type shocks to the HPI Savage X with X a-arms.

This kit will allow you to mount the LST/LST2 shocks onto the HPI Savage X for that needed strength and durability when out extream bashing or even racing. based on the kit you have all come to love over the years on the non X savage.

This mounting kit will allow you to mount the LST/LST2 shocks onto a savage X with X arms with out the need of aluminium towers, modded arms or offset rims. This kit allows you to keep your savage completely stock with plastic parts while having the added benefit of LST/LST2 shocks on the truck.
This kit will fit the following savages (savage X, X-SS) and will also allow for mounting on savages with ally bulkheads, gearbox and non standard TVPs (LCG TVPs etc), please contact us with any questions.

With this shock mounting kit you are able to full adjust the shocks over a range of positions on the top brackets and also the bottom brackets on the a-arm for mounting. This allows for a wide range of setups to your liking and needs..

Kit contents :
4x a-arm mounting brackets for X a-arms.
2x Top shock mounting brackets (Savage X versions).
2x Top support shock mounting bracket. (Savage X versions)
4x Stainless shock bushings.
1x Ti-rod bracket for relocating the Ti-rods.
All screws and washers needed for mounting the kit are included.
Full 5 page colour mounting manual for installing the kit as well as E-mail Support.

All parts are CNC cut and finished to very high standard made from 6082-T6 providing upto 18% more strengh than 6061-T6!!

Please note that there are no LST shocks included with this kit.

If you can translate our manual into any other language please contact us.

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x IRC BLACK MID rear big bore springs - Losi 5T1 x DBXL Top shock cap Bush 5mm1 x Baja Shock Spring Retainer - LST1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x CY Clutch case Housing1 x Brake pad screws - M4 Tower to IRC pads1 x CVD inner Drive set Pins 5x20mm1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x Baja Brake Kit - Full Set all Models1 x CY 4 Bolt Gasket set rebuild kit1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x Rear Heavy Duty losi Shock Shaft - 8mm1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Baja Bush Set - BLUE1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Engine Clutch bottom spacer stock - 875711 x Carburetor Gasket1 x 29cc Piston (36mm)1 x CY Exhaust Gasket1 x Innovative-RC Hoodie - Size Large1 x MT4 Chassi Gaskets - 6x1 x Losi 5ive-T 2.0 servo single arm V2.01 x 24mm Wheel Nuts - GRP & MCD Wheels1 x IRC ESC Box - MT41 x Losi 5ive Engine mount inserts - #201 x Rear Big Bore Shocks - Losi 5ive Blue1 x 1x Savage Diff Cup Case1 x Outdrive cup shaft Orings1 x CVD Pin rebuild kit - B32171 x M5 washers - Zinc plated bag 201 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 5x 2.5x14mm CVD Dowel Pins1 x Spur Gear Spacer - 866161 x Losi 5T 5B Shock Towers V2 - Rear1 x IRC Red UHD Front big bore springs1 x Baja Front Upper Brace Blue - 874811 x Thunder Tiger Differential Case MT4 G3 - Red1 x 26cc piston (34mm)1 x Diff/Bulkhead Housing Screw Set1 x Baja Shock Top Mounts - Front1 x Innovative-RC T-Shirt - Size Large1 x IRC Hing Pins Front Top V2 - 866331 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Flywheel Key1 x M4x16 Socket head cap screws - bag 101 x Losi 5ive Engine mount inserts - #181 x 4mm Nylon brake pipe1 x Blue Big Bore shock Spring Retainers - Aluminium1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x Shock Bleed Screw - 4x1 x Carburetor Set WT6681 x IRC Hing Pins Rear Hub V2 - 866361 x Losi 5ive top shock mounts1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x Rear Big Bore Shocks - Losi 5ive Silver1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Wheel Spacer Adapters - GRP & MCD Wheels1 x 27cc (35mm) Cylinder Head 2 Bolt1 x Losi Titanium Grade 5 King Pins B20741 x HPI Baja Rear Brace 4mm - 874881 x 10x16x0.5 Steel Shim - Pack 101 x 4x Complete Innovative Black Anodized Savage Shocks1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x 4 Bolt Cylinder Gasket1 x Crankcase engine Seal set - Nitrile type1 x Right Clutch Spacer - 875551 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x M3 Captive Nuts / T Nuts - Bag101 x Ofna 250cc Fuel Tank Mounts1 x Dgobone Drive Pin Set 5x24mm1 x Front Big Bore Shocks - Losi 5ive Black1 x M8x20 Socket head cap screws - bag 61 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x HPI Baja Shorty Servo Mount Brace1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x IRC Front MID Front big bore springs - Losi 5T1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x M6 Rod Ends - Left hand thread1 x Torx Screw Kit Elcon etc - High tensile Steel1 x 4x Complete Innovative Red Anodized Savage Shocks1 x Battery box bracket HPI Rush box - Savage X1 x LCG TVPs, Exstended 1inch back with 6mm Front1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x 8x Shock Standoffs - Standard Shocks1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x M3x10 Button Head Socket cap screws - bag 101 x HPI Baja Brake Calliper1 x 4x Savage Steering post bearings - 6x10x3mm1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x Savage Big Bore shock Socks - Black1 x 27cc Piston Rebuild Kit Set (35mm)1 x Futaba type sliding charing switch1 x IRC Hing Pins Rear Bottom V2 - 866351 x V3 Front Big Bore Shocks - Baja 5B 5T1 x Baja Bush Set1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 23cc (32mm) Cylinder Head - 4 Bolt1 x M5 Captive Nuts / T Nuts - Bag101 x 26cc Piston Rebuild Kit Set (34mm)1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Innovative-RC Big Bore Shock Socks - Green1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x HPI Baja stearing servo adapter mount - Blue1 x Shock O-Ring Kit1 x 4-40x3/8 Button Head socket Screw - Bag 101 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x Shock Spring Retainer - LST Springs1 x M6 Rod Ends & camber ball set1 x Innovative-RC Muggy Chassis - Black1 x 2 Bolt heavy duty Cylinder Gasket1 x HPI Baja Brake Calliper - Blue Anodized1 x M8x25 Socket head cap screws - bag 61 x IRC Hing Pins Full Set V2 - 10Pins1 x HPI Baja stearing servo adapter mount1 x IRC Red UHD rear big bore springs1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x Maxima Air Filter Cleaner - Spray1 x 23cc (32mm) Cylinder Head - 2 Bolt1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x X Arm shock mounts - 4x1 x Out Drive Cup Pins - Bag 61 x Innovative-RC Big Bore Shock Socks - Orange1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x NGK Spark Plug CMR7H1 x M4x10 Button Head Socket cap screws - bag 101 x Big Bore Shock Blank Piston1 x Shock Hardware - screws, nuts etc1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Blue Anodized Shock Cap1 x Nitro Engine Piston Stopper1 x 29cc Piston Rebuild Kit Set (36mm)1 x Baja Upper Front Arm Brace Upper Blue1 x Brake plate spacer Blue - 874971 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Big Bore shock Spanner1 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x 10x16x0.3 Steel Shim - Pack 101 x CY 27cc Piston ring - 35x1mm1 x HPI Baja Right Side Engine Mount Brace - 874901 x Rear Shock end Ball - 11mm1 x I-RC stearing Linkages1 x M4x4 Grub/Set Screw1 x HPI Baja Brake Calliper - Black Anodized1 x 2x Flanged Bearing - 10x6x4 3speed
Reviews
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
64.94€

really nice well made chassis plate , looks nice with all my...