Innovative-RC Muggy Chassis - Black

£67.00

Product may vary slightly from image representation.
  • Model:071109-2
Live Stock Check: 2 units
Share This Product

Innovative-RC Losi Muggy Chassis is made from 4mm 6082-T6 (21.5% stronger than 7075-O) for the ultimate high strength chassis.

We have added chamfered droop areas to this chassis for vastly improved set-up for droop down travel adjustment allowing for even more performance enhancements for when racing on the track giving to a much improved ground handling over jumps and in tight corners allowing for more grip on the track for improved lap times!

The flywheel hole has also been improved with a larger chamfer longer life of start box's and easyer access to the flywheel. we have also improved the spur gear hole to allow for improved range of spur gear setup for likes of a 48T spurgear.

We have also added the options of using a Sportwerks Battery/radio Box (Part number: SWK3112) please note that you will need the radio tray and spacers to fit the sportwerks battery box (Innovative-RC part number: 071109-3).

If the above was not enough the chassis also comes complete with 2x chassis gaskets for mounting under the diff housing stoping dirt and grime entering into the diff areas and allowing for longer lasting diff gears.

The chassis is available in black or clear anodized finish for a hard wearing surface finish brushed anodized finished surface.

Included Items:-
1x I-RC Muggy Chassis Black Anodized brushed anodized finished surface.
2x Chassis Diff Gaskets.
1x Set of stickers.

Note: 6082-T6 gives upto 18% more strengh than conventual 6061-T6 & 21.5% than 7075-O

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x 3x Losi 8ight-T Diff Cup - Silver2 x Innovative-RC Muggy radio tray set1 x M8x20 Socket head cap screws - bag 61 x 3x Losi 8ight-T Diff Cup - Black2 x 3x Losi Muggy Diff Cup - Black2 x Black Slotted Big Bore shock Spring Retainers - Aluminium2 x 1x Losi Muggy Diff Cup - Silver1 x Nitro Engine Piston Stopper1 x Crankcase engine Seal set - Viton type1 x Baja Upper Front Arm Brace Upper Blue1 x 1x Losi 8ight-T Diff Cup - Silver3 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Innovative-RC Muggy Chassis - Black1 x 4x8x0.3 Steel Shim - Pack 101 x Rear Big Bore Shocks - Losi 5ive Silver1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Big Bore Shock 3 Hole Piston1 x FILTERED FUEL PICK UP CLUNK2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Baja front Shock end Ball2 x M8x25 Socket head cap screws - bag 61 x 2x 9x24x7mm Ball Bearing Rubber Shield1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x I-RC Losi Big Bore front shock Spring - 44lb1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x 3x6x0.3 Steel Shim - Pack 101 x TurtleRacing Rear shock mounts1 x M3x10 Button Head Socket cap screws - bag 101 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x M4 Captive Nuts / T Nuts - Bag101 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Engine / Cylinder Cover3 x Baja Shock Top Mounts - Rear1 x Innovative-RC Big Bore Shock Socks - Purple1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long2 x Innovative-RC Muggy radio tray set - Black2 x Baja Shock Spring Retainer - Slotted2 x Baja Front Upper Brace Blue - 874812 x Futaba type sliding charing switch2 x M2.5 Nylock Nuts - Bag 102 x Big Bore Shock 4 Hole Piston DUAL Rate2 x Big Bore Shock 5 Hole Piston DUAL Rate2 x Bearing Puller2 x CRT Tower Set - Silver1 x CRT Chassis Gaskets1 x Brake pad screws - M4 Tower to IRC pads1 x Big Bore Shock 4 Hole Piston1 x Black Big Bore shock Spring Retainers - Aluminium1 x Innovative-RC Muggy Chassis - Silver1 x Black Anodized Shock Cap1 x M5 Hank rivet bush - Bag101 x Black Shock Spring Adjuster Ring1 x Out Drive Cup Pins - Bag 61 x Baja Bush Set - BLUE1 x 1x Losi Muggy Diff Cup - Black1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x insulator gasket1 x Innovative-RC Hoodie - Size X Large1 x Baja Shock Spring Retainer1 x Baja Big Bore Shock O-Ring Kit1 x M2.5x12 Stainles Socket Cap Screw - Bag 101 x Front Big Bore Shocks - Losi 5ive Silver1 x Innovative-RC T-Shirt - Size XXLarge1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long
Reviews
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
£70.00

Brought this to convert my original savage XL to a low centr...