Innovative-RC MT4 Chassis

$86.92

Product may vary slightly from image representation.
  • Model:MT4-chassis
Available Options
Live Stock Check: 0 units
Share This Product

 


Innovative-RC Thunder Tiger MT4 Chassis is made from 4mm 6082-T6 for the ultimate high strength chassis resulting in reduced chassis flex.

We have added chamfered droop areas to this chassis just like our Muggy chassis for vastly improved set-up for droop down travel adjustment allowing for even more performance enhancements for when racing on the track giving to a much improved ground handling over jumps and in tight corners allowing for more grip on the track for improved lap times!(adjustment of droop screws may be needed to retain a stock like setup)

Also added are custom mounting locations for  RX Box, Lipo battery tray, ESU Box allowing for a trayless setup to be run on the chassis (items available separate from innovative-RC).

Also included are 6x chassis gaskets for mounting under the front & rear diff/bulkheads to stop dirty entering into these areas. aiding in a longer gear and maintenance free life.

The chassis is available in Silver/Clear anodize , Black, Blue & Red anodized brushed finished surface.

Please pick colour to the side before ordering.
Please note this is a pre-order only listing, we hope to have this item in stock and shipping on or before 14/11/14. any questions please contact us,

Included Items:-
1x I-RC MT4 Chassis brushed anodized finished surface.
6x Chassis Diff Gaskets.
1x Set of stickers.

Items needed:
NONE

Optional Items:
Innovative-RC Battery Tray
Innovative-RC  RX Box
Innovative-RC  ESU Tray

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Brake pad screws - M4 Tower to IRC pads1 x M5 washers - Zinc plated bag 201 x 1x Savage Diff Cup Case1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Engine Clutch bottom spacer stock - 875711 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x 4mm Nylon brake pipe1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Innovative-RC T-Shirt - Size Large1 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x 10x 3.5mm Body Clip - Rpin1 x 4mm flexable brake pipe1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x I-RC Losi Big Bore rear shock Spring - 66lb1 x Baja Bush Set - Black1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Titanium Exhaust Wrap1 x Baja Diff Cup side screws1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x SuperSwitchHD - 1x1 x Torx Screw Kit Elcon etc - High tensile Steel1 x Front Big Bore Shocks - Losi 5ive Blue1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x HPI Savage Screw kit (all models) - High tensile1 x M4 Washer Zinc plated bag 201 x Innovative-RC TT MT4 trayless Kit - Blue1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x HPI Baja Shorty Servo Mount Brace1 x M6 Rod Ends & camber ball set1 x 4x Savage Steering post bearings - 6x10x3mm1 x MCD Fork Ends set 4 - 8mm1 x Center Tower throttle supports1 x High response clutch set - Red Spring1 x 4-40x3/8 Button Head socket Screw - Bag 101 x 3x Losi Muggy Diff Cup - Silver1 x MCD & Savage Shock Spring - 2.5mm1 x Big Bore Shock 2 Hole Piston1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x 2x Top shock support brackets - Savage x1 x M4x12 Countersunk Socket head cap screws - bag 101 x M2.5 Nylock Nuts - Bag 101 x Big Bore Shock 2 Hole Piston DUAL Rate1 x IRC Hing Pins Front Top V2 - 866331 x HPI Baja Rear Lower Brace Blue - 874801 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x CRT Chassis Gaskets1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x Shock Tower Brace - Silver1 x Innovative-RC Muggy radio tray set - Black1 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x M4 Captive Nuts / T Nuts - Bag101 x M6 Rod Ends - Left hand thread1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x M3x12 Countersunk Socket head cap screws - bag 101 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x M3x5 Button Head Socket cap screws - bag 101 x M2 Captive Nuts / T Nuts - Bag 101 x M3x10 Countersunk Socket head cap screws - bag 101 x Innovative-RC Muggy radio tray set1 x M6 Captive Nuts / T Nuts - Bag101 x Flux Black Anodized Standard LCG TVP Kit1 x M5 Captive Nuts / T Nuts - Bag101 x M5 Hank rivet bush - Bag101 x 8x Shock Standoffs - Buggy Shocks1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x Nitro Engine Piston Stopper1 x 4x Hong nor CRT Shock standoffs1 x M4x10 Button Head Socket cap screws - bag 101 x X Upgrade Kit1 x NGK Spark Plug CMR7H1 x Blue Anodized Shock Cap1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x Innovative-RC Hoodie - Size X Large1 x Silkolene - Foam Filter Oil 1L1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x CRT Tower Set - Silver
Reviews
HPI Baja Front Upper Plate 4mm - 87484
HPI Baja Front Upper Plate 4mm - 87484
$29.42

an awesome upgrade to any baja, a lot more strength than a s...