Extended 6mm Race TVP Kit

73.21€

Product may vary slightly from image representation.
  • Model:ext6-race
Live Stock Check: 0 units
Share This Product

 

The ideal upgrade for any serious racer who is all ways looking for the best possible performance.
Allays trying to save them extra few seconds from a race lap or fed up of getting beaten by that split second now is your chance to save some critical weight and earn back them few vital seconds.

These TVPs are specially design with racing in mind where lightens is a key aspect while also maintaining the utmost critical strength within the design.

These TVPs are extended 6mm length and use the standard rear dog bone from the HPI Savage. TVPS are made from 6082-T6 2.5mm thick.
TVPs are full Mid tank ready with pre-drilled holes for fixing of servos and tank, Full mid tank kit (see our midtank kit page)

Weight comparison table :-

 

TVP Weight - TVPs Weight - Complete
2.5mm Innovative-RC EXT6 Race TVPs 5.7oz (160g) 10.6oz (302g)
4mm Innovative-RC bash TVPs 9.7oz (275g) 14.5oz (412g)
standard non LCG HPI 5.8oz (165g) ------
5mm LCG HPI TVP (SavageX) 5.4oz (152g) ------

Note: Weight- TVPs= weight of left & right TVP only, Weight complete= weight of TVP,Skid plate,engineplate & screws.
- weights above should be used as a guide line only.

Included Items :-
1x Front extended 6mm LCG Race TVPs.
1x LCG Engine plate.
1x Extended 6mm length skid plate.
1x TVP screw kit - Hardend grade 12.9 socket cap screws.

Detailed specification of parts:-
TVPs :-
These TVPs are lowered on the Engine and Gearbox giving the savage a more stable and lower ride height. These are made from 2.5mm thick 6082-T6 Aluminum.

12mm lowered on Engine & Gearbox.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them also allows for mounting of any standard roll bar.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG Race extended 6mm TVPs.
Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Roto Start:-
Please note, Roto unit will work with HPI quick access bulkheads found on savage X with no mods, when using standard hpi bulkheads please note ofna roto unit will need to be used or modding of the bulk head unit. after market bulks eg GPM work fine with out the cross brace and allow stock roto to be used.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x UHD Innovative-RC BAJA dogbones 121mm3 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm2 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32163 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm3 x Front Heavy Duty losi Shock Shaft - 8mm1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32182 x CVD inner Drive set Pins 5x22mm1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY3 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x IRC BLACK MID rear big bore springs - Losi 5T1 x DBXL Top shock cap Bush 5mm1 x IRC Red UHD Front big bore springs - Losi 5T1 x Big Bore Shock Body All Colours - Losi Front1 x HPI Baja Shorty Servo Mount Brace1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x CY Flywheel / Fan Cover1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x 10x16x0.1 Steel Shim - Pack 101 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Engine Clutch bottom spacer stock - 875711 x Innovative-RC Hoodie - Size Large1 x CVD Pin rebuild kit - B32171 x MT4 Chassi Gaskets - 6x1 x M6 washers - Zinc plated bag 201 x Spur Gear Spacer - 866161 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Innovative-RC T-Shirt - Size Medium1 x Baja Upper Front Arm Brace Upper Red1 x Losi 5ive Engine mount inserts - #181 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x Rear Big Bore Shocks - Losi 5ive Blue1 x HPI Baja Rear Brace RED 4mm - 874881 x Outdrive cup shaft Orings1 x CY 29cc Piston ring - 36x1mm2 x IRC Front MID Front big bore springs - Losi 5T1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Carburetor Set WT6681 x Shock Bleed Screw - 4x1 x Shock Cap O-Ring Spacers1 x CY stock crank set1 x M4x16 Socket head cap screws - bag 101 x Thunder Tiger Differential Case MT4 G3 - Red1 x Losi 5ive Engine mount inserts - #201 x 10x 3.5mm Body Clip - Rpin2 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x Diff/Bulkhead Housing Screw Set1 x IRC Hing Pins Front Top V2 - 866331 x 4x Complete Innovative Black Anodized Savage Shocks1 x Baja Rear Lower Brace 2 Blue - 874791 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x Piston Roller Pin Bearing2 x Flywheel Key2 x 4x8x0.3 Steel Shim - Pack 102 x I-RC Baja Big Bore rear shock Spring - Stock2 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite2 x Diff/Bulkhead Housing - Rear Silver B25422 x HPI Baja Rear Brace 4mm - 874882 x Big Bore Shock 5 Hole Piston DUAL Rate2 x Ultra Heavy Duty Front Center Dogbone - 78mm2 x IRC RX Box Set - MT42 x Losi 5T 5B Shock Towers Bash - Rear BLACK2 x Blue Big Bore shock Spring Retainers - Aluminium2 x Engine / Cylinder Cover2 x M3x8 Countersunk cap screws - bag 102 x Mugen Fuel Tank Mounts2 x Innovative-RC TT MT4 trayless Kit - RED2 x Rear Big Bore Shocks - Losi 5ive Silver2 x Losi 5T 5B Shock Towers V2 - Rear2 x HPI Baja wheel drive pin 4x282 x M4x16 Countersunk Socket head cap screws - bag 102 x IRC Hing Pins Rear Hub V2 - 866362 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc2 x 23mm Heavy Duty wheel hex - Complete Set (4x)2 x Spur Gear Spacer RED - 866162 x HPI BAja Left Side Engine Mount Brace RED - 874892 x 50x 6mm Body Clip Bulk - Rpin2 x losi 5ive diff inserts2 x I-RC Losi Big Bore rear shock Spring - 66lb2 x Engine / Cylinder Cover 4 Bolt2 x Innovative-RC T-Shirt - Size Large2 x Servo Y Lead JR, Futaba, Hitec etc2 x Roll Bar for HPI Savage 3mm2 x Battery box bracket HPI Rush box2 x HPI Baja Rear Brace 4mm Black Anodized - 874882 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 52 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x CRT Chassis Gaskets2 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0942 x M6 Rod Ends & camber + steering ball set2 x Losi Titanium Grade 5 King Pins B20742 x Baja Front Lower Brace Blue - 874782 x Left Spacer - 875712 x 1x Losi Muggy Diff Cup - Black2 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm2 x Losi 5ive top shock mounts2 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874872 x CY Replacement Crank Case Gasket2 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H2 x 2x Flanged 10x6x3mm2 x M4x30 Socket head cap screws - bag 102 x Losi 5ive Hing Pins A-Arms2 x Clutch Shoe Holder Mount2 x ProLux Light Weight rebuildable fuel filter - large2 x Piston Pin 27 & 29cc - 8x282 x Engine Clutch bottom spacer Black - 875712 x Crankcase engine Seal set - Nitrile type2 x Skid Plate for Exstended 1inch back, 6mm Front TVPs2 x HPI Baja Front Upper Plate 4mm Black Anodized - 874842 x 4 Bolt Cylinder Gasket2 x Big Bore Shock 4 Hole Piston DUAL Rate2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver2 x Innovaitve-RC Shock Piston2 x 27cc (35mm) Cylinder Head 2 Bolt2 x Losi 5T 5B Shock Towers Bash - Rear SILVER2 x 4mm flexable brake pipe2 x 10x16x0.5 Steel Shim - Pack 102 x CY 2 Bolt Gasket set rebuild kit2 x 3x Thunder Tiger Differential Case MT4 G3 Black2 x 3x Losi Muggy Diff Cup - Black2 x M4 Captive Nuts / T Nuts - Bag102 x Front Big Bore Shocks - Losi 5ive Silver2 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874892 x CY Pull Start Assembly - Metal grab2 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x2 x Titanium Exhaust Wrap2 x Wheel Spacer Adapters - GRP & MCD Wheels2 x Rear Axel - Thunder Tiger MT4 CVD Universal2 x Brake plate spacer RED - 874972 x Ofna 250cc Fuel Tank Mounts2 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies2 x Carb & Exhaust screws - 154821 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Baja Diff Oring Seal2 x M5x5 Grub Set Screw2 x Flywheel Nut2 x Left Spacer RED- 875712 x LipoBox - 4S2 x Crankcase engine Seal set - Viton type2 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x Steering Crank shaft2 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3212 x Rear Big Bore Shocks - Losi 5ive Red1 x Shock Tower Brace - Silver2 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts2 x Diff/Bulkhead Housing - Front Silver1 x Diff/Bulkhead Housing Bearings - 15x28x7mm2 x Baja Diff gear Drive pin - 965011 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x IRC Hing Pins Rear Bottom V2 - 866351 x Right Clutch Spacer - 875551 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x 26cc (34mm) Cylinder Head - 4 Bolt1 x Baja Bush Set - Black1 x CY Pull Start Assembly1 x Center Tower top plate for truck V2.01 x Dgobone Drive Pin Set 5x24mm1 x M3x35 Socket head cap screws - bag 101 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Innovative-RC Foam Filter Oil - 100ml1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Shock Bush short1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Pull Start Thumb Screws1 x CY Insulator manifold1 x Baja Diff bush - B0801 x Rear Big Bore Shocks - Losi 5ive Black1 x Hellfire Fuel Tank Mounts
Reviews
Flux Standard LCG TVP Kit
Flux Standard LCG TVP Kit
53.13€

had these a while now and have done some proper hard bashing...