Innovative-RC MT4 Chassis

$86.92

Product may vary slightly from image representation.
  • Model:MT4-chassis
Available Options
Live Stock Check: 0 units
Share This Product

 


Innovative-RC Thunder Tiger MT4 Chassis is made from 4mm 6082-T6 for the ultimate high strength chassis resulting in reduced chassis flex.

We have added chamfered droop areas to this chassis just like our Muggy chassis for vastly improved set-up for droop down travel adjustment allowing for even more performance enhancements for when racing on the track giving to a much improved ground handling over jumps and in tight corners allowing for more grip on the track for improved lap times!(adjustment of droop screws may be needed to retain a stock like setup)

Also added are custom mounting locations for  RX Box, Lipo battery tray, ESU Box allowing for a trayless setup to be run on the chassis (items available separate from innovative-RC).

Also included are 6x chassis gaskets for mounting under the front & rear diff/bulkheads to stop dirty entering into these areas. aiding in a longer gear and maintenance free life.

The chassis is available in Silver/Clear anodize , Black, Blue & Red anodized brushed finished surface.

Please pick colour to the side before ordering.
Please note this is a pre-order only listing, we hope to have this item in stock and shipping on or before 14/11/14. any questions please contact us,

Included Items:-
1x I-RC MT4 Chassis brushed anodized finished surface.
6x Chassis Diff Gaskets.
1x Set of stickers.

Items needed:
NONE

Optional Items:
Innovative-RC Battery Tray
Innovative-RC  RX Box
Innovative-RC  ESU Tray

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x IRC Front MID Front big bore springs - Losi 5T1 x M4 Nylock nut bag of 201 x IRC BLACK MID rear big bore springs - Losi 5T1 x IRC Red UHD Front big bore springs - Losi 5T1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x DBXL Top shock cap Bush 5mm1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Shock Tower Brace - Black1 x HPI Firestorm battery box1 x M3x16 Socket head cap screws - bag 101 x 4mm Shock Rod Ends1 x Maxima Air Filter Cleaner - Spray1 x Big Bore shock Spring Retainers - Aluminium1 x Baja Shock Spring Retainer - Slotted1 x HPI Baja stearing servo adapter mount1 x CY 2 Bolt Gasket set rebuild kit1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Thunder Tiger MT4 CVD Universal rebuild1 x CY 29cc Piston ring - 36x1mm1 x HPI Baja Brake Calliper - Blue Anodized1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x HPI Baja stearing servo adapter mount - Black1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x High response clutch set - Red Spring1 x Innovative-RC Muggy Chassis - Black1 x ProLux Stone Fuel Filter - RED1 x 3x Losi Muggy Diff Cup - Silver1 x M8x20 Socket head cap screws - bag 61 x M3x20 Socket Cap Screws - Bag of 101 x M6 Captive Nuts / T Nuts - Bag101 x 4x Hong nor CRT Shock standoffs1 x IRC Shock Spring Retainer1 x M4x10 Button Head Socket cap screws - bag 101 x Big Bore Shock 5 Hole Piston1 x O-Ring Diff Cups - 5.5x2mm1 x Black Anodized Shock Cap1 x Battery box bracket HPI Firestorm - Savage X1 x Center Tower to Clutch suport brace V1.01 x M3x12 Socket head cap screws - bag 101 x Baja Bush Set1 x M4x12 Countersunk Socket head cap screws - bag 101 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Black Big Bore shock Spring Retainers - Aluminium1 x Losi 5ive Front and rear shock end ball1 x M8 Rod Ends for Big Bore Shocks1 x M6 Rod Ends - Right hand thread1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x IRC Hing Pin screw & washer set1 x M4x30 Countersunk Socket head cap screws - bag 101 x Black Anodized Roll Bar1 x Full X upgrade Kit1 x Innovative-RC Big Bore Shock Socks - Orange1 x X Arm shock mounts - 4x1 x Out Drive Cup Pins - Bag 61 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Piston Snap Ring Set1 x 27cc (35mm) Cylinder Head 4 Bolt1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x 2x Flanged Rubber Shield 10x6x3mm1 x Rear Fuel tank plate support bracket1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x 4-40x3/8 Button Head socket Screw - Bag 101 x Innovative-RC Big Bore Shock Socks - Black1 x Big Bore Shock 4 Hole Piston1 x 2 Bolt heavy duty Cylinder Gasket1 x MCD & Savage Shock Spring - 2.0mm1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Baja Bush Set - Black1 x Center Tower throttle supports1 x M3x5 Button Head Socket cap screws - bag 101 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Brake pad screws - IRC Center Tower to stock Pads1 x HPI BAja Left Side Engine Mount Brace - 874891 x HPI Savage Screw kit (all models) - High tensile1 x Big Bore Shock 3 Hole Piston1 x Losi 5ive drive cup Clips1 x Center Tower to Clutch suport brace V2.01 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x M4 Washer Zinc plated bag 201 x Big Bore Shock Body All Colours - Losi Front1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x CY Kill Switch Inc rubber cover1 x M5 Captive Nuts / T Nuts - Bag101 x HPI Baja Shorty Servo Mount Brace1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x Battery box bracket HPI Firestorm1 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x Shock Spring Retainer - LST Springs1 x Black Adjuster Ring1 x M3x25mm Socket Cap Screw - BAG 101 x Big Bore Shock 2 Hole Piston1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x Innovative-RC Carbon Fiber replacement Pads1 x Skid plate for Standard LCG TVPs1 x Innovative-RC HPI BAJA 5B & 5T Spur Gear - 54T1 x M2.5 Nylock Nuts - Bag 101 x Baja Rear Lower Brace 2 - 874791 x TurtleRacing Rear shock mounts1 x Brake plate spacer - 874971 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x Engine Clutch bottom spacer 6.5mm - 875711 x I-RC stearing Linkages1 x NGK Spark Plug CMR5H1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x 2x Top shock support brackets - Savage x1 x ProLux Stone Fuel Filter - Grey1 x Innovative-RC Muggy radio tray set1 x CY 26cc Piston ring - 34x0.7mm1 x IRC Hing Pins Full Set V2 - 10Pins1 x Big Bore Shock Blank Piston1 x Innovative-RC Dual Brake Kit1 x Center Tower bearing set1 x Losi Steel King Pins B20741 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x M3 Captive Nuts / T Nuts - Bag101 x IRC Red UHD rear big bore springs - Losi 5T1 x Black Shock Spring Adjuster Ring1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Center Tower top plate for truck V1.0
Reviews
HPI Baja Front Upper Plate 4mm - 87484
HPI Baja Front Upper Plate 4mm - 87484
$29.42

an awesome upgrade to any baja, a lot more strength than a s...