F270 4Bolt W/+2 Stroker Crank

$254.07

Product may vary slightly from image representation.
  • Model:F270000000
Available Options
Live Stock Check: 0 units
Share This Product

This Chung Yank (CY) F270 is pre fitted with a +2 Stroker Crank making this engine have 29cc of volume.

NOTE: We can remove, Clutch, Clutch Housing, Air Filter, exhaust, carb etc to reduce cost for thoes that want to use there exisiting setups.

Chung Yang F270 engine (34mm bore, 30mm stroke - 27.2cc) with Walbro WT-668 carb. Includes 54mm inner clutch assembly pre-installed. Ready to bolt-on. Approx 3.25+ horsepower. Similar design to the Zenoah G240RC/G270RC - 4 transfer port hp cylinder, single ring piston, double sided finned flywheel, and hp exhaust canister. Engine requires 91 octane or higher fuel, mixed 25:1 with 2-cycle oil.


Comes as pictured, with plastic/foam air filter, and HP exhaust canister.

For R/C: Fits a wide variety of R/C cars, planes, boats, and helicopters. Same mounting dimensions as Zenoah G230RC / G260RC. For cars - fits FG: Marder, Leopard, Monster Beetle, Monster Truck, Stadium Truck, Pajero, etc. Also fits Duratrax Firehammer, XTM, Carson Attack, HPI Baja 5b, Traxxas Monster Buggy, and most other large scale onroad and offroad RC cars.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x 3x Losi Muggy Diff Cup - Silver1 x X Arm shock mounts - 4x1 x Innovative-RC Big Bore Shock Socks - Green1 x Out Drive Cup Pins - Bag 61 x Maxima Air Filter Cleaner - Spray1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x Shock Spring Retainer - LST Springs1 x M3x12 Socket head cap screws - bag 101 x CRT Tower Set - Silver1 x Black Adjuster Ring1 x M8 Rod Ends for Big Bore Shocks1 x M4x10 Button Head Socket cap screws - bag 101 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Battery box bracket HPI Firestorm - Savage X1 x M4x30 Countersunk Socket head cap screws - bag 101 x M3x25mm Socket Cap Screw - BAG 101 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x IRC Red UHD rear big bore springs - Losi 5T1 x Shock Tower Brace - Blue1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x HPI Baja stearing servo adapter mount1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x 23cc (32mm) Cylinder Head - 2 Bolt1 x Baja Upper Front Arm Brace Upper Blue1 x M3x10 Socket head cap screws - bag 101 x M3x8 Socket head cap screws - bag 101 x X Upgrade Kit1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Baja Diff gear holders1 x Innovative-RC Hoodie - Size X Large1 x Brake plate spacer Blue - 874971 x ProLux Stone Fuel Filter - Grey1 x Red Big Bore shock Spring Retainers - Aluminium1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x MCD & Savage Shock Spring - 2.0mm1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Blue Anodized Shock Cap1 x Spur Gear Spacer Blue - 866161 x Spur Gear Spacer Black - 866161 x Innovative-RC Shock Spings1 x Innovative-RC HPI BAJA 5B & 5T Spur Gear - 54T1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x 90Deg PushFit 4mm tube M51 x Black Big Bore shock Spring Retainers - Aluminium1 x Full X upgrade Kit1 x Black Anodized Roll Bar1 x 10x 6mm Body Clip - Rpin1 x Big Bore shock Spring Retainers - Aluminium1 x Losi Steel King Pins B20741 x Big Bore Shock Blank Piston1 x Baja Rear Lower Brace 2 - 874791 x Skid plate for Standard LCG TVPs1 x Shock Hardware - screws, nuts etc1 x 2x Flanged Rubber Shield 10x6x3mm1 x 2x 12x24x6mm Ball Bearing Rubber Shield- B089
Reviews
Innovative-RC HPI Baja under chassis brace V2 - Blue
Innovative-RC HPI Baja under chassis brace V2 - Blue
$21.38

I received this along with my Innovative-RC chassis and stra...