Innovative-RC HPI Baja 5B 5T enclosed chassis

$149.76

Product may vary slightly from image representation.
  • Model:87477
Available Options
Live Stock Check: 1 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Pre installed inserts for chassis brace
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

 

 

I bought a silver one recently off Rob having seen them on various test cars at the MMR weekend, and because I bent my stock chassis on the last day. Its a very nice looking chassis, and its almost shamefuil it will be scratched to buggery within a few weeks, but hey ho thats what they're for. I like the fact the side rails are not cut out, to help minimise the grass and bits getting in. I also like the blanking plate for the the power switch, so if you move the switch you can blank that bit off as well. Its well thought out, with mysterious holes pre drilled for up and coming optional extras and its very well made. Mine went back together like a dream, although with my alloy GH front shock supports, the fit was tight but correct. Stock chassis or one of these ? its a no brainer really Hosster

Rated by Shaun Howe

What can i say, awesome!!! so much stronger than stock and being enclosed keeps the mess out of the insides, cant rate highly enough, fantastic product at a great price, every baja should have 1 for a bashers video review check out the S.C.B gallery thread on www.baja-forum.co.uk,

Rated by Alan Parker

Bought this amazing chassis, extremely please with it as it looks great and feels solid. Well done innovative great bit of craftsmanship. Just wondering your considering making a quick diff transmission case? Next on the list big bore shocks, I be back innovative. Thanks for the great service

Rated by Zach Kassapi

Hello j'ai demandé a rob ce chassis pour un ami qui n'était plus en stock ma demande a était traité tellement vite que le lendemain ce même chassis etait de nouveau en stock mais en peu d'exemplaires donc je pense que c'était en réponse a ma demande et rien que pour sa irc et toute l'équipe restera vraiment mon fabriquant que j'estime de plus en plus n'importe quelle demande est traité et exécuté le plus rapidement possible je demande toujours des petits plus dans mes commandes et a chaque fois c'est positif contrairement a certains autre ou tout est tout le temps il est beaucoup plus difficile de demander des petits bonus ou autres et pour parler de la qualité et des prix de vos produits c'est encore pareil que du positif j'espère vraiment que vous continuerai a nous sortir et vendre des produits qu'on ne trouve pas ailleurs ou alors beaucoup plus cher,sa ne fait que 6mois que je suis dans le 1/5ème mais honnêtement depuis que j'ai vu les produits irc a l'oeuvre j'ai tout de suite accroché donc voila si vous cherchez quelque chose de fiable et beau a prix plus que raisonnable vous êtes au bon endroit,ne vous arretez pas au produit qui ne sont pas en stock vu que sur simple demande le produit peut être réalisé ou etre mis a jour tres rapidement enfin bon voila continuez comme sa vous êtes au top merci.

Rated by Bastian Drut
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CY stock crank set1 x Crank Case Sealed bearing 12x28x8- 60012RS4 x 26cc (34mm) Cylinder Head - 2 Bolt1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x M6 washers - Zinc plated bag 203 x Carb & Exhaust screws - 154822 x Innovative-RC Foam Filter Oil - 100ml4 x Shock Cap O-Ring Spacers1 x HPI MT2 Diff Cup Case Silver - 2x2 x HPI Baja Brake Calliper - Blue Anodized2 x 26cc Piston Rebuild Kit Set (34mm)5 x 2 Bolt heavy duty Cylinder Gasket1 x M2 Captive Nuts / T Nuts - Bag 104 x CY Insulator manifold3 x Engine / Cylinder Cover2 x 27cc piston (35mm)2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long2 x Baja Front Upper Brace Blue - 874811 x I-RC Losi Big Bore front shock Spring - 44lb2 x Baja Rear Lower Brace 2 Blue - 874794 x CY 23cc Piston Ring - 32x1mm2 x Ceter tower diff mounts Front & Rear2 x Air Filter Gasket3 x IRC Hing Pins Rear Hub V2 - 866361 x M3x16 Socket head cap screws - bag 104 x Flywheel Nut1 x 10x16x1.0 Steel Shim - Pack 103 x CY Engine FlyWheel (Rotor)1 x Piston Roller Pin Bearing2 x M4 Nylock nut bag of 201 x IRC Hing Pins Front Bottom V2 - 866342 x CY 2 Bolt Gasket set rebuild kit1 x insulator gasket1 x TurtleRacing Rear shock mounts2 x 23cc (32mm) Cylinder Head - 4 Bolt1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x High response clutch set - Red Spring2 x Baja Diff gear Drive pin - 965013 x Silkolene - Foam Filter Oil 1L4 x Big Bore shock Spanner1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x HPI MT2 Diff Cup Case Black - 1x1 x Rear Big Bore Shocks - Losi 5ive Red1 x 4 Bolt Cylinder Gasket4 x O-Ring Diff Cups - 5.5x2mm3 x M8 Rod Ends for Big Bore Shocks1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x M5 Spring Washer Zinc plated - bag 201 x CY +1mm Stroker Crank set2 x Carburetor Gasket1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x Outdrive cup shaft Orings1 x M3 washers - Zinc plated bag 201 x M6 Rod Ends - Right hand thread2 x 24mm Wheel Nuts - GRP & MCD Wheels2 x Brake pad screws - IRC Center Tower to stock Pads1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm3 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Center Tower throttle supports4 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x 10x 6mm Body Clip - Rpin1 x Innovative-RC Hoodie - Size XXX Large1 x Short Big Bore Rod Ends - M81 x Baja Shock Top Mounts - Rear1 x CY +2mm Stroker Crank set3 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Shock Bottom End Cap1 x CY 4 Bolt Gasket set rebuild kit1 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt1 x Losi 5ive Engine mount inserts - #202 x Baja Big Bore Shock O-Ring Kit1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32182 x I-RC Losi Big Bore rear shock Spring - 44lb2 x Flywheel Key1 x 10x 3.5mm Body Clip - Rpin1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x CY 26cc Piston ring - 34x1mm2 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Baja Diff o-rings - bag101 x 27cc Piston Rebuild Kit Set (35mm)3 x Innovative-RC Hoodie - Size Large1 x Baja HPI B094: Ball Bearing 20x32x7mm2 x CY Kill Switch Inc rubber cover3 x 26cc (34mm) Cylinder Head - 4 Bolt1 x HPI Baja stearing servo adapter mount - Black3 x IRC Red UHD rear big bore springs1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Diff/Bulkhead Housing Screw Set1 x Big Bore Shock 3 Hole Piston DUAL Rate1 x 50x 3.5mm Body Clip Bulk - Rpin1 x 23cc Piston Rebuild Kit Set (32mm)2 x M3x10 Socket head cap screws - bag 102 x 4-40x3/8 Button Head socket Screw - Bag 103 x Out Drive Cup Pins - Bag 61 x Brake pad screws - M5 to IRC pads1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x CVD inner Drive set Pins 5x20mm1 x I-RC Front Baja Big Bore shock Spring - MID Progressive2 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x Rear Big Bore Shocks - Losi 5ive Silver2 x IRC Hing Pins Front Top V2 - 866331 x M6 Rod Ends - Left hand thread1 x UHD Innovative-RC BAJA dogbones Exstended- 1049662 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x M3 Nylock nut bag of 203 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x CY Exhaust Gasket1 x I-RC Baja Big Bore rear shock Spring - Stock3 x Piston Pin Washer Set2 x CY 27cc Piston ring - 35x1mm1 x HPI MT2 Diff Cup Case Silver - 1x1 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt1 x M4 Captive Nuts / T Nuts - Bag101 x Black Big Bore shock Spring Retainers - Aluminium1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x Losi 5ive Spring Adjuster Ring1 x Red Big Bore shock Spring Retainers - Aluminium1 x Blue Anodized Shock Cap1 x High response clutch set - Yellow Spring3 x Rear Big Bore Shocks - Losi 5ive Black1 x Front - Antiroll Bar brace1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK2 x Shock Bleed Screw - 4x2 x Steering Crank shaft1 x M3x25mm Socket Cap Screw - BAG 101 x LipoBox - 4S2 x M4x16 Socket head cap screws - bag 101 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x Innovative-RC Hoodie - Size X Large1 x 10x16x0.1 Steel Shim - Pack 101 x Piston Pin 27 & 29cc - 8x281 x CY Ignition Coil assembly1 x M4x30 Socket head cap screws - bag 102 x Innovative-RC Hoodie - Size XXXX Large1 x Shock Tower Brace - Black1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x CVD Drive set Pins 4x20mm B65601 x M3x16 Countersunk Socket head cap screws - bag 102 x M3 Captive Nuts / T Nuts - Bag101 x Piston Pin 23 & 26cc - 8x25mm1 x M4x12 Countersunk Socket head cap screws - bag 102 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Engine Clutch bottom spacer 6.5mm - 875711 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x CY Pull Start Assembly1 x Big Bore Shock 2 Hole Piston1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x NGK Spark Plug CMR6H1 x I-RC Flywheel Puller tool1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x SuperSwitchHD - 1x2 x 4mm Nylon brake pipe1 x Baja Shock Top Mounts - Front1 x CVD Pin rebuild kit - B32173 x Holts Brake Cleaner2 x CY Replacement Crank Case Gasket1 x Front Big Bore Shocks - Losi 5ive Black1 x HPI Baja Front Upper Plate 4mm RED - 874841 x M4x30 Countersunk Socket head cap screws - bag 101 x Rear Fuel tank plate support bracket1 x M3x20 Countersunk Socket head cap screws - bag 101 x 6x Differential Gaskets - TT1 x IRC Hing Pins Rear Bottom V2 - 866351 x CY Flywheel / Fan Cover1 x HPI Baja Brake Calliper2 x Crankcase engine Seal set - Nitrile type1 x High Response Clutch Spring - Red1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874873 x Innovative-RC T-Shirt - Size XLarge1 x M5 Hank rivet bush - Bag101 x HPI Savage Screw kit (all models) - High tensile1 x ProLux Stone Fuel Filter - Grey1 x Losi 5ive drive cup Clips1 x M3x8 Countersunk cap screws - bag 101 x Black Shock Spring Adjuster Ring1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x M3x8 Socket head cap screws - bag 101 x Innovative-RC T-Shirt - Size XXLarge1 x HPI BAja Left Side Engine Mount Brace RED - 874891 x IRC ESC Box - MT41 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x M3x3 Grub Set screw1 x X Upgrade Kit1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x Baja Front Lower Brace Blue - 874781 x ProLux Stone Fuel Filter - RED1 x Innovative-RC T-Shirt - Size Medium1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x Futaba type sliding charing switch1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x 10x16x0.3 Steel Shim - Pack 101 x CY +2mm Stuffer Stroked Crank set1 x Roll Bar for HPI Savage 3mm1 x Baja Shock Spring Retainer - LST1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x 5x10x0.3 Steel Shim - Pack 101 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Savage Shock Bottom End Cap1 x Baja Shock Spring Retainer1 x M8x25 Socket head cap screws - bag 61 x PROLUX FILTERED FUEL PICK UP CLUNK
Reviews
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
$56.16

love these shafts they look and feel so sturdy have had no t...