F270 4Bolt W/+2 Stroker Crank

$254.07

Product may vary slightly from image representation.
  • Model:F270000000
Available Options
Live Stock Check: 0 units
Share This Product

This Chung Yank (CY) F270 is pre fitted with a +2 Stroker Crank making this engine have 29cc of volume.

NOTE: We can remove, Clutch, Clutch Housing, Air Filter, exhaust, carb etc to reduce cost for thoes that want to use there exisiting setups.

Chung Yang F270 engine (34mm bore, 30mm stroke - 27.2cc) with Walbro WT-668 carb. Includes 54mm inner clutch assembly pre-installed. Ready to bolt-on. Approx 3.25+ horsepower. Similar design to the Zenoah G240RC/G270RC - 4 transfer port hp cylinder, single ring piston, double sided finned flywheel, and hp exhaust canister. Engine requires 91 octane or higher fuel, mixed 25:1 with 2-cycle oil.


Comes as pictured, with plastic/foam air filter, and HP exhaust canister.

For R/C: Fits a wide variety of R/C cars, planes, boats, and helicopters. Same mounting dimensions as Zenoah G230RC / G260RC. For cars - fits FG: Marder, Leopard, Monster Beetle, Monster Truck, Stadium Truck, Pajero, etc. Also fits Duratrax Firehammer, XTM, Carson Attack, HPI Baja 5b, Traxxas Monster Buggy, and most other large scale onroad and offroad RC cars.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x 1x Losi Muggy Diff Cup - Black1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Shock Tower Brace - Silver1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Diff/Bulkhead Housing - Rear Silver B25421 x Turnbuckle / Tie-Rod relocation bracket1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x 1x Losi 8ight-T Diff Cup - Black1 x Piston Pin 23 & 26cc - 8x25mm1 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x Innovative-RC Muggy radio tray set - Black1 x CVD Pin rebuild kit - B32171 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x 3x Losi Muggy Diff Cup - Black1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x LCG TVPs, Exstended 1inch back with 6mm Front1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x 27cc Piston Rebuild Kit Set (35mm)1 x 4-40x3/8 Button Head socket Screw - Bag 101 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Thunder Tiger MT4 CVD Universal rebuild1 x M4x10 Button Head Socket cap screws - bag 101 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x M6 Rod Ends & Steering ball set1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Futaba type sliding charing switch1 x 1x Savage Diff Cup Case1 x M3x10 Button Head Socket cap screws - bag 101 x 29cc Piston (36mm)1 x CY Clutch case Housing1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x M3x5 Button Head Socket cap screws - bag 101 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x M2 Captive Nuts / T Nuts - Bag 101 x Mugen Fuel Tank Mounts1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Innovative-RC Hoodie - Size XXX Large1 x Losi 5ive-T 2.0 servo single arm V2.01 x 8x Shock Standoffs - Buggy Shocks1 x M8x20 Socket head cap screws - bag 61 x Crank Case Engine Snap Ring1 x Baja Shock Top Mounts - Front1 x Rear Chassis Plate 7075-T6 V3 - 874821 x 50x 6mm Body Clip Bulk - Rpin1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x M8x25 Socket head cap screws - bag 61 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x M5 washers - Zinc plated bag 201 x Thunder Tiger Front/Rear outdrive1 x 5x 2.5x14mm CVD Dowel Pins1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x HPI MT2 Diff Cup Case Black - 1x1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x High Response Clutch Spring - Red1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x CY 23cc Piston Ring - 32x1mm1 x M5 Captive Nuts / T Nuts - Bag101 x Baja Rear lower arm brace Red - 874801 x CY Exhaust Gasket1 x IRC Red UHD Front big bore springs
Reviews
Innovative-RC HPI Baja 5B 5T enclosed chassis
Innovative-RC HPI Baja 5B 5T enclosed chassis
$160.47

Bought this amazing chassis, extremely please with it as it ...