Diff/Bulkhead Housing - Rear Silver B2542

£170.00

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Front - Antiroll Bar brace1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x Baja Front Upper Brace Blue - 874811 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x IRC Hing Pins Front Top V2 - 866331 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x I-RC Losi Big Bore rear shock Spring - 44lb1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Flywheel Key1 x Thunder Tiger Differential Case MT4 G3 - Red1 x CY 29cc Piston ring - 36x1mm1 x I-RC Losi Big Bore front shock Spring - 44lb1 x Turnbuckle / Tie-Rod relocation bracket1 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x 4x Complete Innovative Black Anodized Savage Shocks1 x Losi 5T 5B Shock Towers V2 - Rear1 x 26cc piston (34mm)1 x I-RC Baja Big Bore rear shock Spring - Stock1 x CY stock crank set1 x Diff/Bulkhead Housing Screw Set1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x IRC Hing Pins Rear Hub V2 - 866361 x IRC RX Box Set - MT41 x Shock Cap O-Ring Spacers1 x 4mm Nylon brake pipe1 x Carburetor Set WT6681 x Innovative-RC T-Shirt - Size Large1 x Losi 5ive Engine mount inserts - #201 x M4x16 Socket head cap screws - bag 101 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Baja Rear Lower Brace 2 Blue - 874791 x Losi 5ive Hing Pins A-Arms1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x 10x 3.5mm Body Clip - Rpin1 x Front Axel - Thunder Tiger MT4 CVD Universal1 x HPI Baja Rear Brace 4mm - 874881 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x Blue Big Bore shock Spring Retainers - Aluminium1 x Spur Gear Spacer RED - 866161 x 2x Flanged 10x6x3mm1 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x Left Spacer RED- 875711 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x differential cross pins TT MT4 - 2x1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Piston Pin 27 & 29cc - 8x281 x Steering Crank shaft1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Brake plate spacer RED - 874971 x Hellfire Fuel Tank Mounts1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x CVD inner Drive set Pins 5x22mm1 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x Baja Diff gear Drive pin - 965011 x Baja Diff Oring Seal1 x Crankcase engine Seal set - Viton type1 x Rear Big Bore Shocks - Losi 5ive Black1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Titanium Exhaust Wrap1 x 3x Losi Muggy Diff Cup - Black1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x LipoBox - 4S1 x IRC Hing Pins Rear Bottom V2 - 866351 x M5x5 Grub Set Screw1 x Right Clutch Spacer - 875551 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x Ofna 250cc Fuel Tank Mounts1 x Smart-Fly - Pin & Flag1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x LipoBox - 6S1 x Shock Bush short1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x M3x3 Grub Set screw1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x M3x35 Socket head cap screws - bag 101 x Pull Start Thumb Screws1 x Ceter tower diff mounts Front & Rear1 x Diff/Bulkhead Housing - Front Silver1 x CY Pull Start Assembly1 x Shock Tower Brace - Silver1 x Innovative-RC Foam Filter Oil - 100ml1 x Front Big Bore Shocks - Losi 5ive Black1 x CY Kill Switch Inc rubber cover1 x 6x Differential Gaskets1 x M3x16 Countersunk Socket head cap screws - bag 101 x Center Tower top plate for truck V2.01 x CY Insulator manifold1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x Innovative-RC Muggy Chassis - Silver1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x Innovative-RC Hoodie - Size Small1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Baja Diff bush - B0801 x Baja Front Upper Brace - 874811 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Piston Pin 23 & 26cc - 8x25mm1 x Baja Diff Cup side screws1 x 4x Complete Innovative Red Anodized Savage Shocks1 x M4 Nylock nut bag of 201 x SuperSwitchHD - 1x1 x center tower brake cam set1 x Rear Chassis Plate 7075-T6 V3 - 874821 x Shock Bottom End Cap1 x Center Tower top plate for truck V1.01 x M3x12 Countersunk Socket head cap screws - bag 101 x 1x Losi 8ight-T Diff Cup - Black1 x Clear Anodized Shock Cap1 x Baja Bush Set1 x Crank Case Engine Snap Ring1 x Black Anodized Shock Cap1 x CY Engine FlyWheel (Rotor)1 x M8x25 Socket head cap screws - bag 61 x Center Tower throttle supports1 x Thunder Tiger MT4 CVD Universal rebuild1 x HPI BAja Left Side Engine Mount Brace - 874891 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x M5 Captive Nuts / T Nuts - Bag101 x M6 Hank rivet bush - Bag101 x Big Bore Shock 2 Hole Piston1 x M4x4 Grub Screws1 x M6 Captive Nuts / T Nuts - Bag101 x Innovative-RC Muggy radio tray set1 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x M5 Hank rivet bush - Bag101 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x M2.5 Nylock Nuts - Bag 101 x Innovative-RC Big Bore Shock Socks - Orange1 x TurtleRacing Rear shock mounts1 x 3x Losi Muggy Diff Cup - Silver1 x IRC Hing Pins Full Set V2 - 10Pins1 x HPI MT2 Diff Cup Case Silver - 1x1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Shock Spring Retainer - LST Springs1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x 29cc Piston Rebuild Kit Set (36mm)1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x Brake plate spacer - 874971 x 2x Flanged Rubber Shield 10x6x3mm1 x 4x Hong nor CRT Shock standoffs1 x Center Tower bearing set2 x 5x 2.5x14mm CVD Dowel Pins2 x Thunder Tiger Front/Rear outdrive2 x Baja Upper Front Arm Brace Upper Red2 x Outdrive cup shaft Orings2 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0302 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Bearing Puller1 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x HPI Baja Rear Lower Brace - 874802 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x Silkolene - Foam Filter Oil 1L1 x Full X upgrade Kit1 x ProLux Stone Fuel Filter - Grey1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Rear Chassis Plate 7075-T6 V3 RED - 874822 x M3x8 Socket head cap screws - bag 101 x X Arm shock mounts - 4x1 x Baja Upper Front Arm Brace Upper Blue2 x X Upgrade Kit1 x M3x25mm Socket Cap Screw - BAG 101 x M4x30 Countersunk Socket head cap screws - bag 101 x Battery box bracket HPI Firestorm2 x I-RC Front Baja Big Bore shock Spring - Progressive2 x 23cc (32mm) Cylinder Head - 2 Bolt2 x M3x10 Socket head cap screws - bag 102 x Shock Hardware - screws, nuts etc2 x Black Anodized Roll Bar2 x Brake plate spacer Blue - 874972 x Black Big Bore shock Spring Retainers - Aluminium2 x Big Bore shock Spring Retainers - Aluminium2 x Big Bore shock Spanner2 x MCD & Savage Shock Spring - 2.0mm2 x CRT Tower Set - Silver2 x Skid plate for Standard LCG TVPs2 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0892 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt2 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE2 x 10x 6mm Body Clip - Rpin2 x Innovative-RC Hoodie - Size X Large2 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC2 x I-RC stearing Linkages1 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x Red Big Bore shock Spring Retainers - Aluminium1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Rear Fuel tank plate support bracket1 x 90Deg PushFit 4mm tube M51 x Rear Shock end Ball - 11mm1 x M4x4 Grub/Set Screw1 x HPI Baja wheel drive pin - 965041 x 2x Flanged Bearing - 10x6x4 3speed1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x Black Shock Spring Adjuster Ring1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x Big Bore Shock 4 Hole Piston1 x CVD Drive set Pins 4x20mm B65601 x Big Bore Shock 3 Hole Piston DUAL Rate1 x HPI MT2 Diff Cup Case Black - 1x1 x HPI Baja Right Side Engine Mount Brace RED - 874901 x CY 27cc Piston ring - 35x1mm1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x HPI Baja Brake Calliper - Black Anodized1 x MCD tower mounts for MCD BB shocks1 x 10x16x0.3 Steel Shim - Pack 101 x 4x Complete Innovative Silver Anodized Savage Shocks1 x insulator gasket1 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x IRC ESC Box - MT41 x Diff/Bulkhead Housing - Rear Silver B25421 x Engine / Cylinder Cover 4 Bolt
Reviews
TurtleRacing Rear shock mounts
TurtleRacing Rear shock mounts
£5.60

Bought the big bore shocks with this mount for my hpi baja 5...