Flux Black Anodized 1"+6mm LCG TVP Kit

£65.00

Product may vary slightly from image representation.
  • Model:Flux-1_6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 1Inch Rear 6mm Front Extended over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: 1inch Rear & +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
1inch Rear using Innovative-RC 1inch Dogbone (I-RC part# 61210)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):293grams
Skid Plate & Braces: 100 grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
3 x 26cc (34mm) Cylinder Head - 4 Bolt2 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt3 x M3 Captive Nuts / T Nuts - Bag103 x M5 Captive Nuts / T Nuts - Bag102 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver2 x Flywheel Nut2 x Motorex Air Filter Oil - spray2 x 27cc piston (35mm)2 x Titanium Exhaust Wrap2 x Ultra Heavy Duty Rear Center Dogbone - 83mm2 x Big Bore Shock 5 Hole Piston2 x 2x Top shock support brackets - Savage x3 x Silkolene - Foam Filter Oil 1L2 x 2x 3mm Top Mount Brackets2 x Holts Brake Cleaner3 x Big Bore Shock 4 Hole Piston DUAL Rate2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver2 x 23cc (32mm) Cylinder Head - 4 Bolt2 x Full X upgrade Kit3 x 26cc Piston Rebuild Kit Set (34mm)4 x M5x5 Grub Set Screw2 x 26cc (34mm) Cylinder Head - 2 Bolt2 x Innovative-RC Foam Filter Oil - 100ml2 x 2x 15x28x7mm Ball Bearing Rubber Shield2 x Spur Gear Spacer RED - 866162 x Air Filter Gasket2 x innovative-rc Losi 5ive Diff Cup / Case2 x 23cc piston (32mm)3 x Turnbuckle / Tie-Rod relocation bracket2 x 4x Complete Innovative Red Anodized Savage Shocks2 x Maxima Air Filter Cleaner - Spray2 x 23cc (32mm) Cylinder Head - 2 Bolt2 x Big Bore Shock 5 Hole Piston DUAL Rate2 x 27cc (35mm) Cylinder Head 2 Bolt2 x 26cc piston (34mm) 4Bolt2 x Big Bore shock Spring Retainers - Aluminium2 x Piston Snap Ring Set1 x PROLUX FILTERED FUEL PICK UP CLUNK1 x Baja Diff gear holders2 x 27cc Piston Rebuild Kit Set (35mm)2 x Shock Cap O-Ring Spacers1 x I-RC Flywheel Puller tool1 x ProLux Light Weight rebuildable fuel filter - large1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x 26cc piston (34mm)1 x 26cc piston (34mm) - For 0.7mm Ring1 x M2 Captive Nuts / T Nuts - Bag 101 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Crankcase engine Seal set - Nitrile type1 x Big Bore Shock 3 Hole Piston DUAL Rate2 x X Arm shock mounts - 4x1 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x CY 29cc Piston ring - 36x1mm1 x Thunder Tiger MT4 CVD Universal rebuild1 x Big Bore Shock Body All Colours - Losi Front1 x CY 4 Bolt Gasket set rebuild kit1 x M4 Captive Nuts / T Nuts - Bag101 x 2 Bolt heavy duty Cylinder Gasket1 x Ofna 250cc Fuel Tank Mounts1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x 23cc Piston Rebuild Kit Set (32mm)1 x X Upgrade Kit1 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x CY Flywheel / Fan Cover1 x 4 Bolt Cylinder Gasket2 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 5x 2.5x14mm CVD Dowel Pins1 x Baja Diff gear Drive pin - 965011 x M4x30 Socket head cap screws - bag 101 x Carburetor Gasket1 x Big Bore shock Spanner1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x 2x 5mm Thick Top Mount Brackets - Savage X
Reviews
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
£22.00

<p>As always excellent quality of service!!! And great parts...