Innovative-RC HPI Baja 5B 5T enclosed chassis - BLUE

141.69€

Product may vary slightly from image representation.
  • Model:87477-BL
Available Options
Live Stock Check: 0 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Pre installed Reivets for under chassis brace

 

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Engine Clutch bottom spacer 6.5mm - 875711 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x HPI Baja stearing servo adapter mount1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Baja Bush Set - BLUE1 x I-RC Losi Big Bore front shock Spring - 44lb1 x IRC RX Box Set - MT41 x Rear Big Bore Shocks - Losi 5ive Silver1 x Shock Bush short1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Center Tower top plate for truck V1.01 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x CY 26cc Piston ring - 34x0.7mm1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x Brake plate spacer Blue - 874971 x 10x16x0.3 Steel Shim - Pack 101 x MCD tower mounts for MCD BB shocks1 x Innovative-RC Muggy Chassis - Silver1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x CY 29cc Piston ring - 36x1mm1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Engine / Cylinder Cover 4 Bolt1 x CY Kill Switch Inc rubber cover1 x M3x35 Socket head cap screws - bag 101 x CY Insulator manifold1 x Brake pad screws - IRC Center Tower to stock Pads1 x Shock Bottom End Cap1 x M3 washers - Zinc plated bag 201 x HPI Firestorm battery box1 x 27cc Piston Rebuild Kit Set (35mm)1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x M6 Rod Ends & Steering ball set1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x M6 Rod Ends & camber ball set1 x HPI Baja Screw Kit (all models) - High tensile1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x IRC Hing Pin screw & washer set1 x M8 Rod Ends for Big Bore Shocks1 x 90Deg PushFit 4mm tube M51 x Rear Fuel tank plate support bracket1 x Rear Shock end Ball - 11mm1 x HPI Baja Right Side Engine Mount Brace RED - 874901 x Black Anodized Standard LCG TVP Kit1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Crankcase engine Seal set - Nitrile type1 x ProLux Light Weight rebuildable fuel filter - large1 x Short Big Bore Rod Ends - M81 x M4x12 Socket head cap screws - bag 101 x HPI Baja stearing servo adapter mount - Black1 x Battery box bracket HPI Firestorm - Savage X1 x Blue Anodized Shock Cap1 x M3x8 Socket head cap screws - bag 101 x Center Tower bearing set1 x SuperSwitchHD - 1x1 x HPI Baja wheel drive pin - 965041 x Front Heavy Duty losi Shock Shaft - 8mm1 x Piston Pin 27 & 29cc - 8x281 x Big Bore Shock Blank Piston1 x Brake plate spacer - 874971 x ProLux Stone Fuel Filter - Grey1 x M4x30 Countersunk Socket head cap screws - bag 101 x HPI MT2 Diff Cup Case Black - 1x1 x 6x Differential Gaskets - TT1 x Pull Start Thumb Screws1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x High Response Clutch Spring - Red1 x IRC Hing Pins Full Set V2 - 10Pins1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Innovative-RC Big Bore Shock Socks - Blue1 x IRC Red UHD Front big bore springs - Losi 5T1 x IRC Hing Pins Front Bottom V2 - 866341 x Carb & Exhaust screws - 154821 x 4 Bolt Cylinder Gasket1 x Steering Crank shaft1 x Savage Shock Bottom End Cap1 x Torx Screw Kit Elcon etc - High tensile Steel1 x 4x Complete Innovative Red Anodized Savage Shocks1 x M4 Nylock nut bag of 201 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x Air Filter Gasket1 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x Holts Brake Cleaner1 x HPI Savage Screw kit (all models) - High tensile1 x NGK Spark Plug CMR5H1 x Shock O-Ring Kit1 x Thunder Tiger centre diff out drive1 x Clear Anodized Shock Cap1 x Innovative-RC Dual Brake Kit1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x Innovative-RC Foam Filter Oil - 100ml1 x Innovative-RC Muggy radio tray set - Black1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Big Bore Shock 3 Hole Piston1 x M3x12 Countersunk Socket head cap screws - bag 101 x M3x5 Button Head Socket cap screws - bag 101 x 2x Nitro Silicone Switch Cover - Futaba etc1 x Big Bore Shock Body All Colours - Losi Front1 x M3 Spring Washer Zinc plated - bag 201 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x 23cc (32mm) Cylinder Head - 4 Bolt1 x Shock Tower Brace - Blue1 x HPI BAja Left Side Engine Mount Brace - 874891 x M4x4 Grub Screws1 x TurtleRacing Rear shock mounts1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x M5 Hank rivet bush - Bag101 x IRC Red UHD rear big bore springs - Losi 5T1 x M3x16 Socket head cap screws - bag 101 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x Clear Anodized Shock Cap - Silver1 x MCD & Savage Shock Spring - 2.0mm1 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x 2x Flanged Bearing - 10x6x4 3speed1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x M6 Rod Ends & camber + steering ball set1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x Losi 5ive drive cup Clips1 x 10x 6mm Body Clip - Rpin1 x Big Bore Shock 3 Hole Piston DUAL Rate1 x CY 27cc Piston ring - 35x1mm1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Baja Shock spring retainer - Heavy Duty Springs1 x Center Tower throttle supports1 x CY Engine FlyWheel (Rotor)1 x High response clutch set - Red Spring1 x IRC Red UHD rear big bore springs1 x Black Adjuster Ring1 x IRC Front MID Front big bore springs - Losi 5T1 x Savage Rod End 10mm Balls1 x 3x Losi Muggy Diff Cup - Silver1 x Shock Spring Retainer - LST Springs1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x M4x10 Socket head cap screws - bag 101 x insulator gasket1 x Innovative-RC HPI BAJA 5B & 5T Spur Gear - 57T1 x 1x Losi LST1 & LST2 Diff Cup - Black1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x 29cc Piston Rebuild Kit Set (36mm)1 x Baja Diff gear holders1 x 4x Hong nor CRT Shock standoffs
Reviews
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
25.98€

<p>As always excellent quality of service!!! And great parts...