Diff/Bulkhead Housing - Rear Silver B2542

$212.16

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Engine / Cylinder Cover1 x CY 29cc Piston ring - 36x1mm1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x 26cc Piston Rebuild Kit Set (34mm)1 x TurtleRacing Rear shock mounts1 x Shock Cap O-Ring Spacers1 x Wheel Spacer Adapters - GRP & MCD Wheels3 x ProLux Light Weight rebuildable fuel filter - large1 x Mugen Fuel Tank Mounts1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0942 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi2 x 2x Savage Diff Cup Case2 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874902 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 53 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x M5 Hank rivet bush - Bag101 x HPI Baja wheel drive pin 4x281 x Pull Start Thumb Screws1 x M6 Rod Ends - Right hand thread1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x M3x10 Button Head Socket cap screws - bag 101 x M3 washers - Zinc plated bag 201 x M8x25 Socket head cap screws - bag 61 x CVD inner Drive set Pins 5x20mm1 x Engine Piston Stopper1 x 4mm flexable brake pipe3 x M4x10 Socket head cap screws - bag 101 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x M6 Rod Ends & camber + steering ball set1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x IRC Hing Pins Rear Hub V2 - 866361 x IRC Front MID Front big bore springs - Losi 5T1 x Roll Bar for HPI Savage 3mm1 x 6x Differential Gaskets3 x Baja Shock Top Mounts - Rear3 x 10x 3.5mm Body Clip - Rpin1 x M4x12 Socket head cap screws - bag 101 x SuperSwitchHD - 1x1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Big Bore shock Spanner1 x M6 Rod Ends & camber ball set1 x M3 Nylock nut bag of 201 x Flywheel Nut1 x I-RC Losi Big Bore front shock Spring - 44lb3 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x 1000mm (1M) Heavy Duty Servo Lead JR, Futaba, Hitec1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x HPI Baja Brake Calliper - Blue Anodized1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 4mm Nylon brake pipe2 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3212 x HPI Baja wheel drive pin - 965042 x Flywheel Key2 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc2 x IRC Hing Pins Full Set V2 - 10Pins2 x 5x 2.5x14mm CVD Dowel Pins2 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies2 x IRC Hing Pins Front Bottom V2 - 866341 x Rear Chassis Plate 7075-T6 V3 87482 - Blue2 x M6 Rod Ends - Left hand thread1 x Thunder Tiger Differential Case MT4 G3 - Red2 x Innovative-RC HPI Baja under chassis brace V2 - RED2 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x Baja Diff o-rings - bag101 x 90Deg PushFit 4mm tube M51 x HPI BAja Left Side Engine Mount Brace - 874891 x 10x16x0.1 Steel Shim - Pack 101 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x Baja Bush Set - BLUE1 x M8x20 Socket head cap screws - bag 61 x MCD & Savage Shock Spring - 2.5mm1 x Torx Screw Kit Elcon etc - High tensile Steel1 x HPI Baja Right Side Engine Mount Brace - 874901 x losi 5ive diff inserts1 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x Out Drive Cup Pins - Bag 61 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x IRC Black HD Rear Big Bore Springs1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x 10x16x0.3 Steel Shim - Pack 101 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Baja Shock Top Mounts - Front1 x Engine Clutch bottom spacer 6.5mm - 875711 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x 4x Complete Innovative Black Anodized Savage Shocks
Reviews
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
$87.36

Brought this to convert my original savage XL to a low centr...