Standard Race LCG TVP Kit

63.96€

Product may vary slightly from image representation.
  • Model:race-std
Live Stock Check: 0 units
Share This Product

 

The ideal upgrade for any serious racer who is all ways looking for the best possible performance.
Allays trying to save them extra few seconds from a race lap or fed up of getting beaten by that split second now is your chance to save some critical weight and earn back them few vital seconds.

These TVPs are specially design with racing in mind where lightens is a key aspect while also maintaining the utmost critical strength within the design.

These TVPs are standard length and use the standard dog bones on the HPI Savage. Made from 6082-T6 2.5mm thick.
TVPs are full Mid tank ready with pre-drilled holes for fixing of servos and tank, Full mid tank kit (see our midtank kit page)

Weight comparison table :-

TVP

Weight - TVPs

Weight - Complete

2.5mm Innovative-RC Race TVPs

5.5oz (155g)

11oz (317g)

4mm Innovative-RC bash TVPs

9.7oz (275g)

14.5oz (412g)

standard non LCG HPI

5.8oz (165g)

------

5mm LCG HPI TVP (SavageX)

5.4oz (152g)

------

Note: Weight- TVPs= weight of left & right TVP only, Weight complete= weight of TVP,Skid plate,engineplate & screws.
- weights above should be used as a guide line only.

Included Items :-
1x Standard LCG Race TVPs.
1x LCG Engine plate.
1x Standard length skid plate.
1x TVP screw kit - Hardend grade 12.9 socket cap screws.

Detailed specification of parts:-
TVPs :-
These TVPs are lowered on the Engine and Gearbox giving the savage a more stable and lower ride height. These are made from 2.5mm thick 6082-T6 Aluminum.

12mm lowered on Engine & Gearbox.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them also allows for mounting of any standard roll bar.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG Race standard TVPs.
Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Roto Start:-
Please note, Roto unit will work with HPI quick access bulkheads found on savage X with no mods, when using standard hpi bulkheads please note ofna roto unit will need to be used or modding of the bulk head unit. after market bulks eg GPM work fine with out the cross brace and allow stock roto to be used.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive5 x IRC Hing Pins Full Set V2 - 10Pins1 x M8x25 Socket head cap screws - bag 62 x Rear Big Bore Shocks - Losi 5ive Black2 x Flywheel Key2 x 4x Hong nor CRT Shock standoffs2 x Flux Black Anodized Standard LCG TVP Kit2 x Diff/Bulkhead Housing - Rear Silver B25422 x Crankcase engine Seal set - Nitrile type2 x Big Bore shock Spring Retainers - Aluminium2 x Big Bore Shock Body All Colours - Losi Front3 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x M5 Hank rivet bush - Bag101 x 3x Losi Muggy Diff Cup - Black1 x Shock Bleed Screw - 4x1 x Outdrive cup shaft Orings1 x Baja Diff gear holders1 x M6 Rod Ends & camber ball set1 x CVD Drive set Pins 4x20mm B65601 x Center Tower top plate for truck V1.01 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x MCD Fork Ends set 4 - M51 x HPI Baja Right Side Engine Mount Brace - 874901 x Baja Shock Top Mounts - Front1 x 26cc Piston Rebuild Kit Set (34mm)2 x Baja Big Bore Shock O-Ring Kit2 x 1x Losi 8ight-T Diff Cup - Black2 x 26cc (34mm) Cylinder Head - 4 Bolt2 x IRC Hing Pins Front Bottom V2 - 866342 x Crankcase engine Seal set - Viton type2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long2 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x Black Anodized Shock Cap2 x Baja Upper Front Arm Brace Upper Blue2 x 27cc (35mm) Cylinder Head 4 Bolt1 x M6 Hank rivet bush - Bag102 x UHD Outdrive Rear HPI Baja 5SC size (2x) - 1049672 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x HPI Baja Brake Calliper - Blue Anodized1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x M6 Rod Ends - Right hand thread1 x Carb & Exhaust screws - 154822 x Dgobone Drive Pin Set 5x24mm1 x Thunder Tiger Differential Case MT4 G3 - Red1 x CY Engine FlyWheel (Rotor)1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Mugen Fuel Tank Mounts1 x Center Tower throttle supports1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 4mm Nylon brake pipe1 x Left Spacer RED- 875711 x Standard Race LCG TVP Kit1 x 6x Differential Gaskets1 x Baja Front Upper Brace Blue - 874811 x M6 Rod Ends & camber + steering ball set
Reviews
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
25.58€

<p>As always excellent quality of service!!! And great parts...